Opens in a new tab

TLV62565DBVR

1.5A buck converter, 2.7-5.5V, SOT-23-5, 1.5MHz, 95% efficiency

6374

Effective Inventory

Image for reference only

Manufacturer Part:

TLV62565DBVR

Package:

SOT-23-5 (2.9×2.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV62565DBVR from TI is a 1.5A high-efficiency step-down converter in SOT-23-5, operating from 2.7-5.5V with 1.5MHz switching frequency and up to 95% efficiency for portable and embedded applications.

Key Specifications

Type Step-down (Buck) converter
Input Voltage 2.7-5.5V
Output Voltage 0.6-5.2V (adjustable)
Output Current 1.5A max
Switching Freq 1.5 MHz typ
Iq 50uA typ
Efficiency Up to 95%
Max Duty Cycle 95%
Temp -40 to 85C
Package SOT-23-5

Features

  • 1.5A output in ultra-compact SOT-23-5
  • 1.5MHz fixed switching frequency
  • Up to 95% efficiency
  • 50uA typical quiescent current
  • Constant on-time (COT) control
  • Power save mode for light loads
  • Synchronous rectification
  • 95% maximum duty cycle
  • Internal soft-start 250us typ
  • Over-current and thermal shutdown

Applications

  • Portable devices and smartphones
  • Tablet computers
  • DSL modems
  • Hard disk drives
  • Set-top boxes
  • Battery-powered equipment
Product Introduction: TLV62565DBVR Product Introduction

The TLV62565DBVR from TI is a 1.5A step-down converter in SOT-23-5. With 2.7-5.5V input, 1.5MHz switching, and up to 95% efficiency, it provides compact power conversion for portable and embedded systems. The DBVR suffix denotes SOT-23-5 with 3kpcs tape and reel.

Working Principle: TLV62565DBVR Working Principle

The TLV62565 uses a constant on-time (COT) control scheme with adaptive on-time for pseudo-fixed frequency operation. Synchronous rectification eliminates the external Schottky diode for higher efficiency. In power save mode (light loads), the switching frequency reduces to maintain efficiency. The 95% maximum duty cycle supports low dropout operation near the input voltage.

Pin Description: TLV62565DBVR Pin Definition and Functions
Pin Name Function
1 GND Ground
2 SW Switch node (to inductor)
3 VIN Input voltage (2.7-5.5V)
4 EN Enable (active high)
5 FB Feedback voltage (0.6V ref)
Application Scenarios: In which products and applications is TLV62565DBVR used
  • Portable device power supplies
  • 3.3V to 1.8V step-down
  • Battery-powered system rails
  • Tablet and smartphone PMIC
Alternative Models: What chips are recommended as replacements for TLV62565DBVR
Manufacturer Part Number Notes
TI TLV62569DBVR 2A version
TI TLV62568DBVR 1A version
Monolithic Power MP2143 Similar 1.5A buck
Silergy SY8113 1.5A buck, 1.5MHz

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1