Opens in a new tab

ISO1050DUB

Isolated CAN transceiver, 5000Vrms, 1Mbps, SOIC-16 wide body

5673

Effective Inventory

Image for reference only

Manufacturer Part:

ISO1050DUB

Package:

SOIC-16 wide body (10.3×7.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ISO1050DUB from TI is an isolated CAN transceiver combining a CAN bus transceiver with 5000Vrms galvanic isolation, supporting CAN data rates up to 1Mbps in a wide-body SOIC-16 package.

Key Specifications

Type Isolated CAN transceiver
Isolation Voltage 5000 Vrms
CAN Data Rate 1 Mbps
CAN Standard ISO 11898
Bus Nodes Up to 110
CMTI 50 kV/us min
Supply (Side 1) 3.0-5.5V (VCC1)
Supply (Side 2) 4.75-5.25V (VCC2)
Temp -40 to 105C
Package SOIC-16 wide body

Features

  • 5000Vrms reinforced galvanic isolation
  • 1Mbps CAN data rate (ISO 11898)
  • 50kV/us minimum CMTI
  • Up to 110 nodes on CAN bus
  • Bus-pin ESD protection exceeds 8kV HBM
  • Dominant timeout protection
  • Thermal shutdown protection
  • 3-5.5V logic side supply
  • 5V bus side supply
  • Cross-barrier under-voltage detection

Applications

  • Industrial CAN bus isolation
  • Motor drive CAN interfaces
  • Automotive CAN gateways
  • Solar inverter communication
  • Building automation CAN networks
  • Medical equipment CAN isolation
Product Introduction: ISO1050DUB Product Introduction

The ISO1050DUB from TI integrates a CAN transceiver with 5000Vrms galvanic isolation in a single wide-body SOIC-16 package. Supporting CAN data rates up to 1Mbps per ISO 11898, it eliminates the need for separate optocouplers and CAN transceivers.

Working Principle: ISO1050DUB Working Principle

The ISO1050 combines TI digital isolator technology with a CAN transceiver. The digital isolator provides 5000Vrms isolation between the logic side (VCC1) and bus side (VCC2). The CAN transceiver on the bus side converts TTL logic levels to differential CAN bus signals (CANH, CANL). Dominant timeout prevents network lock-up from stuck dominant states.

Pin Description: ISO1050DUB Pin Definition and Functions
Pin Group Name Function
Logic Side TXD, RXD CAN transmit data in, receive data out
Bus Side CANH, CANL Differential CAN bus signals
Control EN, RS Enable and mode control
Power VCC1/VCC2 3-5.5V logic, 5V bus side
GND1/GND2 Ground Isolated grounds
Application Scenarios: In which products and applications is ISO1050DUB used
  • Industrial CAN bus isolation
  • Motor drive CAN communication
  • Automotive CAN gateways
  • Solar inverter CAN networks
Alternative Models: What chips are recommended as replacements for ISO1050DUB
Manufacturer Part Number Notes
TI ISO1050DUBR Tape and reel version
TI ISO1042 5Mbps CAN FD version
Analog Devices ADM3053 Isolated CAN transceiver
Silicon Labs Si8621+SN65HVD230 Two-chip solution

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1