Opens in a new tab

SN65176DR

RS-485/RS-422 transceiver, 5V, 12Mbps, half-duplex, SOIC-8

8765

Effective Inventory

Image for reference only

Manufacturer Part:

SN65176DR

Package:

SOIC-8 (4.9×6.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN65176DR from TI is an RS-485/RS-422 differential bus transceiver operating from 5V supply. It supports data rates up to 12Mbps in half-duplex mode with driver and receiver enable controls in SOIC-8 package.

Key Specifications

Type RS-485/RS-422 transceiver
Supply Voltage 5V
Data Rate Up to 12 Mbps
Mode Half-duplex
Drivers/Receivers 1/1
Bus Nodes 32 (1 unit load)
Common Mode Range -7V ~ +12V
ESD Protection 15kV HBM
Operating Temp -40°C ~ +85°C
Package SOIC-8

Features

  • RS-485 and RS-422 compatible
  • Up to 12Mbps data rate
  • Half-duplex with separate driver/receiver enable
  • 32 node bus capability (1 unit load)
  • Wide common-mode range: -7V to +12V
  • 15kV HBM ESD protection on bus pins
  • Thermal shutdown and current limiting protection
  • Industry-standard 75176 pinout

Applications

  • Industrial communication networks
  • Building automation (BACnet, Modbus)
  • Motor drive communication
  • PLC and DCS I/O networks
  • Security and access control systems
Product Introduction: SN65176DR Product Introduction

The SN65176DR from TI is a 5V RS-485/RS-422 transceiver supporting up to 12Mbps in half-duplex mode. With 32-node bus capability, wide common-mode range, and industry-standard 75176 pinout, it is the go-to choice for industrial differential communication networks.

Working Principle: SN65176DR Working Principle

The SN65176 combines a differential driver and receiver on a single chip. The driver converts TTL-level serial data into differential signals on the A/B bus lines. The receiver converts differential signals back to TTL. Separate driver enable (DE) and receiver enable (/RE) pins allow half-duplex operation. The driver features current limiting and thermal shutdown for fault protection.

Pin Description: SN65176DR Pin Definition and Functions
Pin Name Function
1 RO Receiver output
2 /RE Receiver enable (active low)
3 DE Driver enable (active high)
4 DI Driver input
5 GND Ground
6 A Non-inverting bus I/O
7 B Inverting bus I/O
8 VCC 5V supply
Application Scenarios: In which products and applications is SN65176DR used
  • Industrial RS-485 communication
  • Modbus and BACnet networks
  • Motor drive communication
  • Energy metering networks
  • Access control systems
Alternative Models: What chips are recommended as replacements for SN65176DR
Part Number Manufacturer Notes
SN75176DR TI Commercial temp version
SN65HVD75DR TI Lower power, 20Mbps
ADM485 Analog Devices Pin-compatible alternative
MAX485 Maxim Pin-compatible alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1