Opens in a new tab

TJA1044GT/3Z

CAN FD transceiver, 5Mbps, ISO 11898-2, standby mode, AEC-Q100, SOIC-8

3535

Effective Inventory

Image for reference only

Manufacturer Part:

TJA1044GT/3Z

Package:

SOIC-8 (4.9×3.9×1.75mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NXP TJA1044GT/3Z is a high-speed CAN FD transceiver with standby mode from the Mantis family. Fully compliant with ISO 11898-2:2016, it supports data rates up to 5 Mbit/s with improved TXD-to-RXD propagation delay of 210 ns.

Key Specifications

Protocol CAN / CAN FD (ISO 11898-2:2016)
Max Data Rate 5 Mbit/s
Supply Voltage 4.75 V to 5.25 V
Propagation Delay 210 ns (TXD to RXD)
Receiver Hysteresis 300 mV
ESD (Bus Pins) ±8 kV IEC and HBM
Operating Temperature -40°C to +150°C
Package SOIC-8 (4.9×3.9mm)

Features

  • ISO 11898-2:2016 and SAE J2284 compliant
  • CAN FD data rates up to 5 Mbit/s
  • Very low-current standby with bus wake-up
  • AEC-Q100 qualified
  • ±8 kV ESD on bus pins
  • Excellent EMC without common mode choke
  • Predictable fail-safe behavior

Applications

  • Engine and transmission ECUs
  • Automotive gateways
  • Body electronics
  • Industrial CAN networks
Product Introduction: TJA1044GT/3Z Product Introduction

The TJA1044GT/3Z from NXP is a high-speed CAN FD transceiver from the Mantis family, providing an interface between a CAN protocol controller and the physical two-wire CAN bus. It implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to J2284-5. The GT variant specifies timing parameters for data rates up to 5 Mbit/s in CAN FD fast phase with an improved TXD-to-RXD propagation delay of 210 ns. A very low-current Standby mode with bus wake-up capability supports energy-efficient system designs.

Working Principle: TJA1044GT/3Z Working Principle

The TJA1044 operates in Normal mode for full-speed communication and Standby mode for ultra-low power with wake-up capability. In Normal mode, the transmitter drives the CAN bus differentially, and the receiver provides the received data to the CAN controller. In Standby mode, the transmitter is disabled but the receiver remains active, monitoring the bus for a wake-up pattern. Upon detecting a valid wake-up, the device signals the host controller. The GT variant adds tight loop delay symmetry specifications enabling reliable CAN FD communication at 5 Mbit/s.

Pin Description: TJA1044GT/3Z Pin Definition and Functions
Pin Name Type Description
1 TXD Input Transmit data input
2 GND Ground Ground
3 VCC Power 5V supply
4 RXD Output Receive data output
5 VIO Power I/O supply voltage (3.3V/5V)
6 CANL I/O CAN Low bus line
7 CANH I/O CAN High bus line
8 STB Input Standby mode control
Application Scenarios: In which products and applications is TJA1044GT/3Z used
  • Engine and transmission ECUs
  • Automotive gateway modules
  • Body control units and door modules
  • Industrial CAN and CAN FD networks
  • Diagnostic and service tools
Alternative Models: What chips are recommended as replacements for TJA1044GT/3Z
Model Manufacturer Key Difference
TJA1044BT/0Z NXP Recommended new design replacement
TJA1044GT/1Z NXP Different packaging suffix
TJA1462GT NXP CAN SIC variant for higher data rates

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1