Opens in a new tab

TPS61010DGSR

250mA boost, 1.8V fixed out, 0.9-1.8V in, 500kHz, 8-VSSOP, -40 to 85C

8197

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61010DGSR

Package:

8-VSSOP (3.0×3.0x1.1mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments TPS61010DGSR is a 1.8V fixed-output, 250mA boost (step-up) DC-DC converter. 0.9V minimum input, 90% efficiency, and 1uA shutdown current in an 8-pin VSSOP package for battery-powered applications.

Key Specifications

Topology Boost (Step-Up)
Output Voltage 1.8V fixed
Output Current 250 mA
Input Voltage 0.9V to 1.8V (single cell)
Switching Frequency 500 kHz typ
Efficiency ~90% typ
Quiescent Current 20 uA typ
Shutdown Current 1 uA typ
Operating Temperature -40 to +85C
Package 8-VSSOP (3.0×3.0mm)

Features

  • 0.9V minimum start-up voltage
  • 1.8V fixed output
  • 250mA output from single alkaline cell
  • Internal N-channel MOSFET switch
  • Anti-ringing mode reduces EMI
  • Adjustable current limit

Applications

  • Single alkaline cell to 1.8V boost
  • Battery-powered instrument supply
  • Low-voltage energy harvester interface
  • Single NiMH cell boost converter
Product Introduction: TPS61010DGSR Product Introduction

The TPS61010DGSR from Texas Instruments is a 250mA boost (step-up) DC-DC converter with 1.8V fixed output in an 8-pin VSSOP package. The device starts up with input voltage as low as 0.9V, making it ideal for single alkaline or NiMH cell applications. With 90% typical efficiency and 20uA quiescent current, it efficiently converts low battery voltage to a regulated 1.8V rail. The anti-ringing feature suppresses inductor ringing during discontinuous conduction mode.

Working Principle: TPS61010DGSR Working Principle

The TPS61010 uses a current-mode PWM boost topology. The internal N-channel MOSFET switch charges the inductor during the on-time, and the inductor energy transfers to the output through the external Schottky diode during the off-time. The error amplifier regulates the output to 1.8V by adjusting the peak inductor current. The device can start with a 0.9V input by using an auxiliary start-up circuit that operates from VOUT during initial start-up. Anti-ringing circuitry damps inductor ringing in DCM.

Pin Description: TPS61010DGSR Pin Definition and Functions
Pin Name Type Description
1 VIN Input Supply input (0.9-1.8V)
2 EN Input Enable (active high)
3 FB/NC – Fixed 1.8V (no external divider)
4 GND Power Ground
5 NC – No connect
6 SW Output Switch node (to inductor/diode)
7 NC – No connect
8 VOUT Output 1.8V output
Application Scenarios: In which products and applications is TPS61010DGSR used
  • Single AA alkaline cell to 1.8V
  • Battery-powered MCU supply from 1.2V NiMH
  • Solar energy harvester 0.9V to 1.8V boost
  • Thermoelectric generator interface
Alternative Models: What chips are recommended as replacements for TPS61010DGSR
Model Manufacturer Key Difference
TPS61070 TI Adjustable output version
MAX1724 ADI 2V fixed boost, similar

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1