Opens in a new tab

NSVBAT54HT1G

30V Schottky diode, 0.32V Vf, 100mA, SOD-523, -55 to 150C

4311

Effective Inventory

Image for reference only

Manufacturer Part:

NSVBAT54HT1G

Package:

SOD-523 (SC-79, 1.2×0.8×0.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NSVBAT54HT1G is a 30V Schottky barrier diode in a SOD-523 (SC-79) package. Low 0.32V forward voltage at 10mA, 1uA reverse leakage for battery-powered signal steering.

Key Specifications

Reverse Voltage 30 V
Forward Voltage 0.32V typ @ 10mA
Forward Current 100 mA max
Reverse Leakage 1 uA max @ 30V
Capacitance 10 pF typ
Operating Temperature -55 to +150C
Package SOD-523 (SC-79, 1.2×0.8mm)

Features

  • Ultra-low 0.32V forward voltage
  • 30V reverse voltage
  • 1uA low reverse leakage
  • 100mA forward current rating
  • Tiny SOD-523 footprint
  • AEC-Q101 qualified

Applications

  • Battery-powered signal steering
  • Power supply OR-ing diode
  • Reverse polarity protection
  • Low-voltage clamp and protection
Product Introduction: NSVBAT54HT1G Product Introduction

The NSVBAT54HT1G from onsemi is a 30V Schottky barrier diode in an ultra-small SOD-523 (SC-79) package. The 0.32V typical forward voltage at 10mA minimizes voltage drop in battery-powered signal steering and OR-ing applications. With 1uA maximum reverse leakage at 30V, it preserves battery life in always-on circuits. The AEC-Q101 qualification supports automotive applications. The tiny 1.2×0.8mm footprint saves PCB area in space-constrained designs.

Working Principle: NSVBAT54HT1G Working Principle

The BAT54HT1 uses a metal-silicon Schottky barrier junction formed by depositing a refractory metal on N-type silicon. The Schottky barrier has a lower forward voltage drop (0.32V) compared to a PN junction (0.7V) because conduction is via thermionic emission of majority carriers, not minority carrier injection. No stored charge means near-zero reverse recovery time. The trade-off is higher reverse leakage compared to PN junctions, limited to 1uA in this device.

Pin Description: NSVBAT54HT1G Pin Definition and Functions
Pin Name Type Description
1 Anode Anode Diode anode
2 Cathode Cathode Diode cathode
Application Scenarios: In which products and applications is NSVBAT54HT1G used
  • Single-cell battery OR-ing diode
  • MCU GPIO low-voltage steering
  • Solar cell reverse blocking diode
  • Signal clamp and protection
Alternative Models: What chips are recommended as replacements for NSVBAT54HT1G
Model Manufacturer Key Difference
BAT54S Nexperia Dual series Schottky, SOT-23
RB521S30 Rohm 30V Schottky, similar spec

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1