Opens in a new tab

AZ431LBNTR-G1

1.24V-18V adj shunt ref, +/-1%, 20ppm/C, SOT-23-3, -40 to 125C

10067

Effective Inventory

Image for reference only

Manufacturer Part:

AZ431LBNTR-G1

Package:

SOT-23-3 (2.9×1.3×1.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Diodes Incorporated AZ431LBNTR-G1 is a low-voltage adjustable precision shunt voltage reference. 1.24V to 18V output range, +/-1% initial tolerance, 20ppm/C temperature coefficient, 100mA cathode current in SOT-23-3 package.

Key Specifications

Reference Voltage 1.24V (min)
Max Output Voltage 18V
Tolerance +/-1%
Temp Coefficient 20 ppm/C typ
Cathode Current 0.1mA to 100mA
Dynamic Impedance 0.05 ohm typ
Min Ika for Regulation 55 uA typ
Operating Temp -40 to +125C
Package SOT-23-3

Features

  • 1.24V low reference voltage
  • +/-1% tight initial tolerance
  • 20 ppm/C low temperature drift
  • 0.05 ohm low dynamic impedance
  • 100mA high sink current
  • Adjustable output with 2 resistors

Applications

  • Switching power supply feedback
  • Charger voltage reference
  • Motherboard voltage regulation
  • Industrial power supply reference
Product Introduction: AZ431LBNTR-G1 Product Introduction

The AZ431LBNTR-G1 from Diodes Inc is a low-voltage (1.24V) adjustable precision shunt regulator in SOT-23-3. The 1.24V reference allows lower output voltages than standard TL431 (2.5V). +/-1% tolerance and 20 ppm/C tempco provide stable reference for feedback loops in switching power supplies, chargers, and motherboard VRMs. 100mA cathode current capability supports direct optocoupler drive in isolated supplies.

Working Principle: AZ431LBNTR-G1 Working Principle

The AZ431L uses a bandgap reference circuit that generates a stable 1.24V at the REF pin. An internal error amplifier compares the REF voltage with the bandgap and drives the cathode to maintain regulation. Two external resistors set the output voltage: Vout = Vref * (1 + R1/R2). The 0.05 ohm dynamic impedance ensures stable loop operation.

Pin Description: AZ431LBNTR-G1 Pin Definition and Functions
Pin Name Description
1 REF Reference input
2 Anode Anode (GND)
3 Cathode Cathode output
Application Scenarios: In which products and applications is AZ431LBNTR-G1 used
  • SMPS optocoupler feedback
  • Battery charger reference
  • VRM voltage setpoint
Alternative Models: What chips are recommended as replacements for AZ431LBNTR-G1
Model Manufacturer Key Difference
TL431BDBZR TI 2.495V version

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1