Opens in a new tab

MC33797BPEWR2

CAN FD transceiver, AEC-Q100, 5Mbps, HWQFN-16, -40 to 125C

10861

Effective Inventory

Image for reference only

Manufacturer Part:

MC33797BPEWR2

Package:

HWQFN-16 (5.0×5.0x0.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi MC33797BPEWR2 is an automotive-grade CAN FD (Flexible Data Rate) transceiver. AEC-Q100 qualified for in-vehicle networking up to 5Mbps.

Key Specifications

Type CAN FD Transceiver
Grade AEC-Q100 Automotive
Data Rate Up to 5 Mbps (CAN FD)
VCC 5V
VIO 3.3V / 5V selectable
Bus Protection +/-58V bus fault
Operating Temp -40 to +125C
Package HWQFN-16 (5x5mm)

Features

  • AEC-Q100 automotive qualified
  • CAN FD up to 5Mbps
  • 3.3V/5V selectable I/O voltage
  • +/-58V bus fault protection
  • Very low EMC emission
  • Listen-only and standby modes
  • HWQFN-16 5x5mm package
  • RoHS compliant

Applications

  • Automotive CAN FD network
  • EV/HEV CAN bus
  • ADAS sensor communication
  • Body electronics CAN FD
Product Introduction: MC33797BPEWR2 Product Introduction

The MC33797BPEWR2 from onsemi is an AEC-Q100 qualified CAN FD transceiver for automotive in-vehicle networking. Supports CAN FD data rates up to 5Mbps. 3.3V/5V selectable VIO for direct MCU interface. +/-58V bus fault protection for 12V/24V automotive systems. Very low EMC emission for automotive EMC requirements.

Working Principle: MC33797BPEWR2 Working Principle

The transceiver converts the MCU CAN controller TX/RX logic signals (via VIO-level pins) to CAN bus differential signals (CANH/CANL). In dominant state, CANH is driven toward VCC and CANL toward GND, creating ~2V differential. In recessive state, both lines are biased to ~2.5V via internal biasing. CAN FD mode allows data phase bit rates up to 5Mbps for faster payload transfer.

Pin Description: MC33797BPEWR2 Pin Definition and Functions
Pin Name Description
1 TXD Transmit data input
2 GND Ground
3 VCC 5V supply
4 RXD Receive data output
5,6 CANH,L CAN bus
7 VIO I/O voltage
Application Scenarios: In which products and applications is MC33797BPEWR2 used
  • Auto CAN FD
  • EV CAN bus
  • ADAS communication
Alternative Models: What chips are recommended as replacements for MC33797BPEWR2
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1