Opens in a new tab

Home » Integrated Circuits ICs » PI5A3166CEX

PI5A3166CEX

SPDT analog switch, 2.5ohm RON, SC70-6

7045

Effective Inventory

Image for reference only

Manufacturer Part:

PI5A3166CEX

Package:

SC70-6

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PI5A3166CEX from Diodes Incorporated is a single SPDT (single-pole double-throw) analog switch with ultra-low 2.5 ohm ON resistance in a tiny SC70-6 package. The wide 1.65V to 5.5V supply range and 5 pC charge injection make it suitable for audio signal routing and battery-powered analog switching.

Key Specifications

Function Single SPDT analog switch
ON Resistance 2.5 ohm max
Switching Time 20 ns
Supply Voltage 1.65V to 5.5V
Charge Injection 5 pC
Package SC70-6 (2×1.25mm)

Working Principle

A single control input (IN) selects between two analog paths (NC and NO) connecting to the common (COM) terminal. When IN=LOW, COM connects to NC; when IN=HIGH, COM connects to NO. Low-RON DMOS FETs minimize signal attenuation. Break-before-make switching prevents momentary shorting between NC and NO.

Applications

  • Audio signal routing
  • Sensor multiplexing
  • Battery-powered analog switching
  • Gain selection
Product Introduction: PI5A3166CEX Product Introduction

The PI5A3166CEX from Diodes Incorporated is a single SPDT (single-pole double-throw) analog switch with ultra-low 2.5 ohm ON resistance in a tiny SC70-6 package. The wide 1.65V to 5.5V supply range and 5 pC charge injection make it suitable for audio signal routing and battery-powered analog switching.

Working Principle: PI5A3166CEX Working Principle

A single control input (IN) selects between two analog paths (NC and NO) connecting to the common (COM) terminal. When IN=LOW, COM connects to NC; when IN=HIGH, COM connects to NO. Low-RON DMOS FETs minimize signal attenuation. Break-before-make switching prevents momentary shorting between NC and NO.

Pin Description: PI5A3166CEX Pin Definition and Functions
Pin Name Description
1 NO Normally-open throw
2 COM Common
3 NC Normally-closed throw
4 GND Ground
5 IN Control input
6 VCC Supply
Application Scenarios: In which products and applications is PI5A3166CEX used
  • Audio signal routing
  • Sensor multiplexing
  • Battery-powered analog switching
  • Gain selection
Alternative Models: What chips are recommended as replacements for PI5A3166CEX
Model Manufacturer Key Difference
TS5A3166 TI Equivalent SPDT switch

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1