Opens in a new tab

Home » Audio ICs, Integrated Circuits ICs » EPM1270T144C5N

EPM1270T144C5N

MAX II CPLD, 1,270 macrocells, 8Kbit UFM, instant-on flash, 1.8V/2.5V/3.3V I/O

2687

Effective Inventory

Image for reference only

Manufacturer Part:

EPM1270T144C5N

Package:

144-pin TQFP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

EPM1270T144C5N is an Intel/Altera MAX II EPM1270 CPLD, 1,270 macrocells, 144-pin TQFP, commercial grade.

Key Specifications

Type MAX II CPLD
Macrocells 1,270
UFM 8,192 bits user flash
Package 144-pin TQFP (T144)
Speed Grade C5
Series EPM1270

Features

  • 1,270 macrocell MAX II CPLD
  • 8K bits user flash memory (UFM)
  • In-system programmable
  • 144-pin TQFP package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: EPM1270T144C5N Product Introduction

EPM1270T144C5N is an Intel/Altera MAX II EPM1270 CPLD, 1,270 macrocells, 144-pin TQFP, commercial grade.

Working Principle: EPM1270T144C5N Working Principle

The EPM1270T144C5N is a MAX II CPLD from Intel/Altera. It uses a macrocell-based architecture with programmable AND/OR logic arrays and flip-flops. The Macrocells are grouped into Logic Array Blocks (LABs) interconnected by a programmable routing matrix. User Flash Memory (UFM) provides non-volatile storage. Configuration is instant-on from on-chip flash, enabling the device to be operational immediately after power-up without external configuration. I/O elements support multiple standards and feature programmable drive strength and slew rate.

Pin Description: EPM1270T144C5N Pin Definition and Functions
Pin Group Name Description
I/O GPIO Programmable I/O with multiple drive strength settings
Power VCC, VCCIO Core and I/O supply (1.8V/2.5V/3.3V)
Ground GND Ground reference
JTAG TDI, TDO, TMS, TCK IEEE 1149.1 JTAG boundary scan and ISP
Clock CLK Global clock input
Application Scenarios: In which products and applications is EPM1270T144C5N used
  • Address decoding and glue logic
  • Power-on reset and sequencing control
  • I2C/SPI bus bridging
  • State machine implementation
  • Board-level interface adaptation
Alternative Models: What chips are recommended as replacements for EPM1270T144C5N
Model Manufacturer Key Difference
XC2C128 Xilinx CoolRunner-II, 128 macrocell, ultra-low power
MACHXO2 Lattice 6K LUT CPLD with embedded flash

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1