Opens in a new tab

W25Q64JVSIQ

64Mb Serial NOR Flash, Quad SPI, 133MHz, 8MB, SOIC-8, -40~85°C

34567

Effective Inventory

Image for reference only

Manufacturer Part:

W25Q64JVSIQ

Package:

SOIC-8 (208mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The W25Q64JVSIQ is a 64Mbit (8MB) Serial NOR Flash Memory from Winbond with Standard/Dual/Quad SPI and 133 MHz clock rate. One of the most widely used SPI NOR Flash densities, it serves as the default code storage choice for many microcontroller and SoC designs. Packaged in SOIC-8 (208mil).

Key Specifications

Density 64Mbit (8MB)
Supply Voltage 2.7V to 3.6V
Interface Standard/Dual/Quad SPI
Max Clock Rate 133 MHz
Page Size 256 bytes
Sector Size 4KB
Endurance 100,000 P/E cycles
Operating Temp -40°C to +85°C
Package SOIC-8 (208mil)
Part Status Active

Features

  • 64Mbit Serial NOR Flash — most popular density
  • Standard/Dual/Quad SPI, 133 MHz
  • 4KB sectors, 32KB/64KB blocks
  • OTP area, security registers
  • 100K P/E endurance, 20-year retention

Applications

  • Default MCU/SoC code storage
  • Linux boot and rootfs
  • XIP firmware execution
  • OTA update partition storage
Product Introduction: W25Q64JVSIQ Product Introduction

The W25Q64JVSIQ is a 64Mbit (8MB) Serial NOR Flash from Winbond with Standard/Dual/Quad SPI and 133 MHz clock. As one of the most widely used SPI NOR Flash densities, it serves as the default code storage for many MCU and SoC designs, including STM32, ESP32, and NXP platforms. The SOIC-8 (208mil) package is supported by virtually all PCB design tools.

Working Principle: W25Q64JVSIQ Working Principle

Serial NOR Flash with Standard/Dual/Quad SPI modes. In Quad SPI mode, all four IO lines transfer data for 4x read bandwidth, enabling fast XIP (Execute-in-Place) operation. Read/program/erase follow standard SPI NOR Flash protocol. 100K P/E endurance per sector with 20-year data retention.

Pin Description: W25Q64JVSIQ Pin Definition and Functions
Pin Name Type Function
1 CS# Input Chip select
2 DO/IO1 I/O Data out / IO1
3 WP#/IO2 I/O WP / IO2
4 GND Power Ground
5 DI/IO0 I/O Data in / IO0
6 CLK Input Clock
7 HOLD#/IO3 I/O Hold / IO3
8 VCC Power Supply
Application Scenarios: In which products and applications is W25Q64JVSIQ used
  • STM32 / ESP32 / NXP code storage (default choice)
  • Embedded Linux boot + rootfs
  • XIP firmware execution
  • OTA update dual-bank partition
Alternative Models: What chips are recommended as replacements for W25Q64JVSIQ
Manufacturer Part Number Package Notes
GigaDevice GD25Q64C SOP-8 64Mb QSPI alternative
Macronix MX25L6433F SOP-8 64Mb QSPI alternative
ISSI IS25LP064A SOP-8 64Mb QSPI alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1