Opens in a new tab

DL-165

1-ch high-speed optocoupler, 10Mbps, 3750Vrms, logic output, DIP/SOP-8, -40~85°C

4567

Effective Inventory

Image for reference only

Manufacturer Part:

DL-165

Package:

DIP-8 / SOP-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DL-165 is a high-speed digital optocoupler from Isocom / Broadcom with 10 Mbps data rate and 3750 Vrms isolation rating. It uses an infrared LED optically coupled to a integrated photodetector with high-speed logic gate output, providing reliable galvanic isolation for digital signal transmission.

Key Specifications

Channels 1
Isolation Rating 3750 Vrms
Data Rate 10 Mbps
Propagation Delay ~50 ns typical
CTR N/A (logic output)
Supply Voltage 4.5V to 5.5V
Operating Temp -40°C to +85°C
Package DIP-8 / SOP-8
Part Status Active

Features

  • Single-channel high-speed optocoupler
  • 10 Mbps data rate
  • 3750 Vrms isolation rating
  • Logic gate output (no CTR degradation)
  • Ultra-high common mode rejection
  • Industry-standard 8-pin package

Applications

  • Isolated digital signal transmission
  • Power supply feedback loop
  • Motor drive isolation
  • Industrial I/O isolation
Product Introduction: DL-165 Product Introduction

The DL-165 is a high-speed digital optocoupler from Isocom with 10 Mbps data rate and 3750 Vrms isolation rating. The integrated logic gate output eliminates CTR (Current Transfer Ratio) degradation concerns typical of transistor-output optocouplers. The 8-pin DIP/SOP package is pin-compatible with industry-standard high-speed optocouplers like the 6N137 and HCPL-2601.

Working Principle: DL-165 Working Principle

An infrared LED on the input side emits light when forward-biased. A photodetector IC on the output side receives the optical signal and drives a high-speed logic gate output. The isolation barrier (optically transparent, electrically insulating) provides 3750 Vrms galvanic isolation. The logic gate output ensures defined logic levels regardless of LED drive current variations, unlike transistor-output optocouplers where CTR degrades over time and temperature.

Pin Description: DL-165 Pin Definition and Functions
Pin Name Function
1 ANODE LED anode
2 CATHODE LED cathode
3,4 NC No connect
5 VO Output
6 GND2 Output ground
7 VE Output enable
8 VCC2 Output supply
Application Scenarios: In which products and applications is DL-165 used
  • Isolated SPI/UART digital communication
  • SMPS feedback loop isolation
  • Motor drive signal isolation
  • Industrial PLC digital I/O
Alternative Models: What chips are recommended as replacements for DL-165
Manufacturer Part Number Package Notes
Broadcom HCPL-2601 DIP-8 10Mbps optocoupler reference
Vishay 6N137 DIP-8 10Mbps optocoupler alternative
TI ISO721 SOIC-8 Digital isolator (non-opto) alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1