Opens in a new tab

Home » Integrated Circuits ICs » SD68C128K-12

SD68C128K-12

High-voltage phototransistor optocoupler, 80V VCEO, 200-400% CTR (K grade), 5000V isolation, SMD

5678

Effective Inventory

Image for reference only

Manufacturer Part:

SD68C128K-12

Package:

SOP-4

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SD68C128K-12 is a high-voltage phototransistor optocoupler featuring an 80V collector-emitter voltage rating and high current transfer ratio (CTR). This surface-mount device provides 5000Vrms electrical isolation between input and output circuits, making it suitable for high-voltage power supply feedback and industrial control applications. The K-12 grade designation indicates a specific CTR binning range optimized for consistent performance across temperature variations. Packaged in a compact SMD form factor, it is ideal for dense PCB designs requiring reliable galvanic isolation with high output voltage capability.

Key Specifications

Type High-Voltage Phototransistor Optocoupler
Input Side GaAs Infrared LED
Output Side High-Voltage NPN Phototransistor
Isolation Voltage (VISO) 5000 Vrms (1 min)
Current Transfer Ratio (CTR) 200-400% at IF=5mA, VCE=5V (K grade)
Collector-Emitter Voltage (VCEO) 80 V min
Saturation Voltage (VCE(sat)) 0.3 V max
Collector Dark Current (ICEO) 100 nA max
Rise Time (tr) 6 µs typical
Fall Time (tf) 10 µs typical
Package SOP-4 / SOP-5 (SMD)
Operating Temperature -55°C ~ +110°C

Features

  • High VCEO: 80V minimum rating
  • High CTR range: 200% to 400% (K grade)
  • 5000Vrms isolation voltage
  • Surface-mount package (SMD)
  • Enhanced temperature stability
  • UL recognized (UL1577)
  • VDE certified (DIN EN 60747-5-5)
  • RoHS compliant and halogen-free
  • Low coupling capacitance
  • High common-mode rejection

Applications

  • Offline switch-mode power supplies
  • Flyback and forward converter feedback
  • High-voltage sensing circuits
  • Industrial automation and control
  • Telecom power systems (48V)
  • Battery management systems
  • Solid state relays
  • Medical equipment isolation
Product Introduction: SD68C128K-12 Product Introduction

The SD68C128K-12 is a K-grade high-voltage phototransistor optocoupler offering an 80V collector-emitter voltage rating with a current transfer ratio (CTR) specified between 200% and 400%. This higher CTR grade (compared to the TJ-15 variant) provides increased output sensitivity, making it ideal for applications where drive current is limited or where higher noise margin is desired. The device consists of a gallium arsenide infrared emitting diode optically coupled to a high-voltage silicon NPN phototransistor, all enclosed in a surface-mount package. The 5000Vrms isolation barrier provides robust galvanic separation between input and output circuits, essential for safety isolation in offline power supplies and industrial control systems. The high VCEO rating of 80V allows direct interfacing with higher voltage buses such as 48V telecom rails or auxiliary power supplies without the need for additional voltage regulation on the output side. The SMD package enables compact, automated assembly, making it suitable for high-volume manufacturing. This device meets major international safety standards including UL1577 and VDE (DIN EN 60747-5-5), and is RoHS compliant. It finds widespread use in offline flyback converters, high-voltage monitoring circuits, telecom power systems, and industrial I/O modules.

Working Principle: SD68C128K-12 Working Principle

The SD68C128K-12 optocoupler operates by converting an electrical input signal into light, transmitting it across an insulating barrier, and converting it back to an electrical signal on the output side — providing complete galvanic isolation. The input side infrared LED (IRED) emits light proportional to the forward current (IF). This light travels through a transparent insulating medium (the isolation barrier) and strikes the base-collector junction of the high-voltage phototransistor on the output side. Photons absorbed in the depletion region generate electron-hole pairs that create a photocurrent, which acts as the base current for the NPN transistor. The collector current (IC) is then approximately CTR × IF, where CTR for the K grade is 200-400%. The higher CTR of the K grade means more output current per unit of LED drive current, enabling operation with lower input currents or providing higher output drive capability. The high-voltage phototransistor (80V VCEO) is designed with a thicker collector drift region to support higher voltage breakdown, using optimized doping profiles to maintain current gain at elevated voltages. In switching applications, the device transitions between saturation (low VCE, high current) when LED current is applied, and cutoff (high VCE, near-zero current) when the LED is off. The isolation barrier (5000Vrms) is designed to withstand high differential voltages between input and output sides indefinitely at normal operating levels, and can sustain much higher voltages for short durations. This isolation prevents ground loops, eliminates common-mode noise, and provides operator safety protection.

Pin Description: SD68C128K-12 Pin Definition and Functions
Pin Number Pin Name Type Description
1 Anode Input LED anode (positive terminal)
2 Cathode Input LED cathode (negative terminal)
3 Emitter Output Phototransistor emitter
4 Collector Output Phototransistor collector
Application Scenarios: In which products and applications is SD68C128K-12 used
  • AC-DC converter feedback circuits
  • Flyback transformer primary-secondary isolation
  • 48V telecom power supply modules
  • High-voltage battery monitoring
  • Industrial PLC analog I/O
  • Solid state relay construction
  • Medical device patient protection circuits
  • Motor drive fault detection
Alternative Models: What chips are recommended as replacements for SD68C128K-12
Manufacturer Part Number Description
Vishay VO619A-9 80V VCEO optocoupler, 200-400% CTR, SMD
Everlight EL357N-C Phototransistor optocoupler, 35V, SOP-4
Sharp PC817C Phototransistor optocoupler, 35V, DIP-4
ON Semiconductor FODM817C Phototransistor optocoupler, 35V, SMD

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1