Opens in a new tab

Home » Integrated Circuits ICs » ACS70311LKTATN-010B5-C

ACS70311LKTATN-010B5-C

Hall-Effect Current Sensor, ±10A, 5V, SOIC-8, Galvanic Isolation

10000

Effective Inventory

Image for reference only

Manufacturer Part:

ACS70311LKTATN-010B5-C

Package:

SOIC-8 (SOP-8)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ACS70311 is a high-sensitivity linear Hall-effect current sensor from Allegro MicroSystems. The -010B5 variant provides 10A range with 5V supply, offering galvanically isolated current sensing via an integrated Hall element and copper conduction path. Ideal for AC or DC current measurement in motor control, power supplies, and industrial applications.

Key Specifications

Type Linear Hall-Effect Current Sensor
Current Range ±10A (-010B5)
Sensitivity ~100mV/A (5V supply)
Supply Voltage 5V (4.5V ~ 5.5V)
Bandwidth ~80 kHz (typical)
Conductor Resistance 2.1 mΩ (typical)
Isolation Voltage ~2.1 kVrms
Accuracy ~±1.5% (total)
Package SOP-8 / SOIC-8
Response Time ~5 µs

Features

  • Galvanically isolated current sensing
  • ±10A bidirectional current range
  • Low 2.1mΩ conductor resistance
  • 5V single supply operation
  • Ratiometric output (proportional to VCC)
  • Fast response time (~5µs)
  • Integrated Hall sensor and conductor
  • Small SOIC-8 package
  • Factory trimmed accuracy
  • RoHS compliant

Applications

  • Motor control and drives
  • Power supply monitoring
  • Overcurrent protection
  • Battery management systems
  • Industrial automation
  • Load detection
  • Solar inverters
  • AC/DC current measurement
Product Introduction: ACS70311LKTATN-010B5-C Product Introduction

The ACS70311 is a high-sensitivity linear Hall-effect current sensor from Allegro MicroSystems. The -010B5 variant provides 10A range with 5V supply, offering galvanically isolated current sensing via an integrated Hall element and copper conduction path. Ideal for AC or DC current measurement in motor control, power supplies, and industrial applications.

Working Principle: ACS70311LKTATN-010B5-C Working Principle

The ACS70311 uses the Hall effect to measure current. Current flowing through the integrated copper conductor creates a magnetic field proportional to the current. A Hall sensor element placed near the conductor detects this magnetic field and converts it to a proportional output voltage. The small 2.1mΩ conductor resistance minimizes power loss, and the galvanic isolation between the current path and sensor output provides safety and noise immunity.

Pin Description: ACS70311LKTATN-010B5-C Pin Definition and Functions
Pin Name Description
1 IP+ Current input (positive)
2 IP+ Current input (positive, bonded)
3 GND Ground
4 VIOUT Voltage output (proportional to current)
5 VCC Power supply (5V)
6 IP- Current output (negative)
7 IP- Current output (negative, bonded)
8 NC / FLT No connect / Fault output (some variants)
Application Scenarios: In which products and applications is ACS70311LKTATN-010B5-C used
  • Motor control and drives
  • Power supply monitoring
  • Overcurrent protection
  • Battery management systems
  • Industrial automation
  • Load detection
  • Solar inverters
  • AC/DC current measurement
Alternative Models: What chips are recommended as replacements for ACS70311LKTATN-010B5-C
Manufacturer Part Number Description
Allegro ACS712ELCTR-20A-T 20A current sensor
Allegro ACS724 Current sensor with isolation
TI INA219 I2C current/power monitor

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1