Opens in a new tab

MC908QT4ACDWER

8-bit HC08 MCU, 4KB Flash, 128B RAM, 4-ch 8-bit ADC, 8MHz internal osc, 8-SOIC, NXP HC08QT

1500

Effective Inventory

Image for reference only

Manufacturer Part:

MC908QT4ACDWER

Package:

8-SOIC (0.150″, 3.90mm Width), 4.9×3.9×1.75mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MC908QT4ACDWER is an 8-bit microcontroller from NXP Semiconductors (formerly Freescale), based on the M68HC08 CPU core architecture. Part of the popular HC08 QT family of low-pin-count microcontrollers, this device features 4KB of in-application programmable Flash memory, 128 bytes of RAM, and a basic peripheral set including a 4-channel 8-bit ADC, a 16-bit two-channel timer/PWM module, and a keyboard interrupt module. Operating at up to 8MHz bus speed with a 2.7V to 5.5V supply range, the MC908QT4 is housed in an 8-pin SOIC package. With its minimal pin count and integrated features including a trimmable internal oscillator, COP watchdog, and low-voltage detect, the MC908QT4 is an excellent choice for cost-sensitive applications requiring minimal I/O and program memory such as simple sensors, appliance controls, and discrete component replacement.

Key Specifications

r>

Parameter Value
Manufacturer NXP Semiconductors (Freescale)
Core Architecture HC08 (CPU08) 8-bit CISC
CPU Speed (max) 8 MHz bus (internal oscillator)
Program Memory 4KB (4K x 8) Flash
RAM Size 128 bytes
EEPROM None (Flash can be used for data storage)
Supply Voltage Range 2.7V to 5.5V
I/O Pins 5 GPIO (shared with other functions)
ADC 4-channel, 8-bit SAR
Timers 1 x 16-bit TIM (2 channels: input capture / output compare / PWM)
PWM Channels 2 channels (via TIM module)
Communications None hardware (software UART possible via timer + GPIO)
Keyboard Interrupt KBI module (multiple input wake-up)
Oscillator Internal trimmable, no external components needed
Watchdog (COP) Yes (Computer Operating Properly)
Low Voltage Detect Yes (LVD with selectable trip points)
Operating Temperature -40°C to +85°C (C grade)
Package 8-SOIC (0.150″, 3.90mm Width)
Packaging Tape & Reel, 2,500 pcs/reel
Product Status Active (NRND recommended to verify)

Features

  • M68HC08 8-bit CPU core
  • 4KB in-application programmable Flash memory
  • 128 bytes of RAM
  • 4-channel 8-bit analog-to-digital converter (ADC)
  • 16-bit, 2-channel timer/PWM module (TIM)
  • Trimmable internal oscillator — no external crystal needed
  • Keyboard interrupt (KBI) module
  • Computer operating properly (COP) watchdog timer
  • Low-voltage detect (LVD) with reset or interrupt
  • Flash security feature to protect firmware
  • 5 general-purpose I/O pins with selectable pull-ups
  • High current sink/source capability on I/O pins
  • Wide supply voltage: 2.7V to 5.5V
  • Multiple clock source options: internal, external RC, crystal
  • Background debug mode (BDM) for programming and debugging
  • Small 8-pin SOIC package
  • Temperature range: -40°C to +85°C
  • Lead-free and RoHS compliant

Applications

  • Simple sensor interfaces and signal conditioning
  • Appliance control and white goods
  • Battery chargers and power management
  • LED lighting control and dimming
  • Discrete component replacement
  • Fan speed control and small motor control
  • Keypad and pushbutton interfaces
  • Home automation and smart switches
  • Power supply monitoring and sequencing
  • Low-cost embedded control applications
Product Introduction: MC908QT4ACDWER Product Introduction

The MC908QT4ACDWER from NXP Semiconductors is a compact, low-cost 8-bit microcontroller in the HC08 QT family, designed for applications requiring minimal I/O count and program memory. Built on the M68HC08 CPU core, this device delivers up to 8MHz bus speed and features 4KB of in-application programmable Flash memory and 128 bytes of RAM. Despite its small 8-pin SOIC package, the MC908QT4 packs a surprising amount of functionality including a 4-channel 8-bit ADC, a 16-bit timer with two channels supporting input capture, output compare, and PWM modes, and a keyboard interrupt module for wake-up from low-power modes. The internal trimmable oscillator eliminates the need for external crystal components, reducing total system cost and board space. The Flash memory supports in-application programming (IAP), allowing firmware updates in the field through a simple two-wire interface. System reliability features include a COP watchdog timer, low-voltage detection (LVD), and illegal opcode/address reset detection. With only 5 general-purpose I/O pins but flexible peripheral multiplexing, the MC908QT4 is an ideal solution for replacing discrete components in simple control applications, providing more functionality and flexibility than analog or logic alternatives at a comparable cost. Typical applications include simple sensor interfaces, appliance controls, battery chargers, LED dimming, fan control, and any low-cost embedded function where a small MCU adds intelligence without adding significant cost.

Working Principle: MC908QT4ACDWER Working Principle

The MC908QT4 is built around the M68HC08 CPU08 core, an 8-bit CISC processor that executes the HC08 instruction set. The CPU fetches instructions from Flash memory and executes them using its arithmetic logic unit (ALU), index registers, and stack pointer. Program execution can be interrupted by hardware interrupts from peripherals (ADC, timer, keyboard, etc.) or by reset sources (power-on, COP watchdog, low-voltage detect). The internal clock module provides a trimmable internal RC oscillator that generates the system clock without external components, which can be factory-trimmed for accuracy. The 8-bit ADC uses a successive approximation register (SAR) architecture to convert analog voltages on its 4 input channels to digital values, with 8-bit resolution. The 16-bit timer/PWM module (TIM) provides two channels that can be independently configured for input capture (measuring pulse widths), output compare (generating timed events), or pulse-width modulation (controlling motor speed, LED brightness, etc.). The keyboard interrupt module monitors up to 6 I/O pins for level changes and can generate an interrupt to wake the MCU from low-power stop or wait modes, enabling efficient power management in battery-operated applications. In stop mode, all clocks are halted and current consumption drops to microamp levels, while wait mode halts the CPU but keeps peripherals running for faster wake-up response. Flash memory programming is performed through the monitor ROM (MON08) interface or by the application code itself (in-application programming), using the on-chip charge pump to generate the high voltages needed for Flash erase and program operations.

Pin Description: MC908QT4ACDWER Pin Definition and Functions
Pin Name Type Description
1 PTA0 / T1CH0 / AIN0 / KBD0 I/O Port A bit 0 / Timer channel 0 / ADC input 0 / Keyboard interrupt 0
2 PTA1 / T1CH1 / AIN1 / KBD1 I/O Port A bit 1 / Timer channel 1 / ADC input 1 / Keyboard interrupt 1
3 PTA2 / T1CLK / AIN2 / KBD2 I/O Port A bit 2 / Timer clock input / ADC input 2 / Keyboard interrupt 2
4 PTA3 / RST / AIN3 / KBD3 I/O Port A bit 3 / Reset / ADC input 3 / Keyboard interrupt 3
5 VSS Power Ground (VSS)
6 PTB0 / OSC1 / R / KBD4 I/O Port B bit 0 / Oscillator input / IRQ / Keyboard interrupt 4
7 PTB1 / OSC2 / KBD5 I/O Port B bit 1 / Oscillator output / Keyboard interrupt 5
8 VDD Power Positive supply voltage (2.7V to 5.5V)

Note: Pins are multiplexed with multiple peripheral functions. Exact pin function is configured through port configuration and module control registers. Pin 4 (PTA3/RST) is the default reset pin and can be configured as a general-purpose I/O when the reset function is disabled. The OSC1/OSC2 pins can be used for external crystal/ceramic resonator or as GPIO when using the internal oscillator.

Application Scenarios: In which products and applications is MC908QT4ACDWER used
  • Simple Sensor Interfaces: Ideal for temperature, light, and analog sensor interfaces where the 8-bit ADC provides basic measurement capability and the MCU handles calibration and signal processing
  • Appliance Control: Used in small appliances such as coffee makers, toasters, and humidifiers for temperature control, timing functions, and user interface
  • Battery Chargers: Implements simple charging algorithms with voltage and current sensing via the ADC, and PWM control of charging current
  • LED Lighting Control: Provides PWM-based dimming control for LED lights, strips, and fixtures, with analog input for brightness adjustment
  • Discrete Component Replacement: Replaces discrete logic circuits, timers, and analog control circuits with a single MCU for reduced BOM cost and board space
  • Fan Speed Control: Implements closed-loop or open-loop fan speed control using the PWM output and timer peripherals
  • Keypad Interfaces: Manages pushbutton inputs with the keyboard interrupt module, providing debouncing and wake-on-press functionality
  • Power Supply Sequencing: Monitors power supply voltages with the ADC and LVD, and controls power-up/down sequencing for multi-rail systems
Alternative Models: What chips are recommended as replacements for MC908QT4ACDWER
Model Manufacturer Flash RAM ADC Package
MC908QT2ACDWE NXP 2KB 128B 4-ch 8-bit 8-SOIC
MC908QY4ACDWE NXP 4KB 128B 8-ch 8-bit 16-PDIP/SOIC
PIC10F200 Microchip 256B 16B No SOT-23 (smallest)
ATTINY13A Microchip 1KB 64B 4-ch 10-bit 8-SOIC
STM8S001J3 STMicro 8KB 1KB 5-ch 10-bit 8-SOIC

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1