Opens in a new tab

Home » Motion Sensors, Sensors » TLE4941PLUSC

TLE4941PLUSC

AEC-Q100 differential Hall speed sensor, two-wire current interface, ASIL B(D), SSO-2, Infineon TLE4941PLUSC

1945

Effective Inventory

Image for reference only

Manufacturer Part:

TLE4941PLUSC

Package:

PG-SSO-2 (Single-sided outpackage, 2-pin), 5.34mm × 3.7mm × 1.95mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLE4941PLUSC is a differential Hall-effect speed sensor IC from Infineon Technologies, designed specifically for automotive wheel speed sensing applications such as Anti-Lock Braking Systems (ABS) and Electronic Stability Program (ESP). Part of the XENSIV™ sensor family, this device uses advanced BiCMOS technology to integrate two Hall probes with a 2mm spacing, a differential amplifier, comparator, and a two-wire current output interface on a single chip. The TLE4941PLUSC features dynamic self-calibration that cancels magnetic and device offsets immediately after startup, delivering high sensitivity with a minimum magnetic flux density of 0.7mT. Operating from 4.5V to 24V supply voltage and across -40°C to +150°C junction temperature, it comes in a PG-SSO-2 package and is qualified to AEC-Q100 automotive standards with ISO 26262 ASIL B(D) compliance for functional safety applications.

Key Specifications

Parameter Value
Manufacturer Infineon Technologies
Product Series XENSIV™ TLE4941plusC
Type Differential Hall Effect Speed Sensor IC
Technology BiCMOS – Hall Effect
Sensing Principle Differential (two Hall probes, 2mm spacing)
Supply Voltage Range 4.5 V to 24 V
Supply Current (Low/High) 7 mA / 14 mA (two-wire current interface)
Min Magnetic Flux Density 0.7 mT
Frequency Range 1 Hz to 10,000 Hz
Output Interface Two-wire current interface (current modulation)
Output Rise/Fall Slew Rate 8 mA/µs typ
Start-Up Calibration 4 magnetic edges for first calibration
Initial Calibration Delay 300 µs max
Jitter (close, 1σ) ±2% @ ΔB ≥ 2mT, Tj < 150°C
Operating Junction Temperature -40°C to +150°C
Storage Temperature -55°C to +175°C
Package PG-SSO-2 (2-pin single-sided outpackage)
Package Dimensions 5.34mm × 3.7mm × 1.95mm
Qualification AEC-Q100 Automotive Grade
Functional Safety ISO 26262 ASIL B(D) capable
ESD Robustness High ESD and EMC immunity
Integrated Capacitor 1.8nF overmolded (C variant)
Packaging Ammo Pack, 1500 pcs/reel

Features

  • Two-wire current interface — minimizes wiring harness complexity
  • Dynamic self-calibration principle — compensates for offsets automatically
  • Single-chip solution — Hall probes + signal processing integrated
  • No external components required — reduces BOM cost and board space
  • High sensitivity — minimum 0.7mT magnetic threshold
  • South and north pole pre-induction — works with both encoders and tone wheels
  • High resistance to piezo effects — suitable for overmolded sensors
  • Large operating air gaps — flexible mechanical design
  • Wide operating temperature: -40°C to +150°C
  • AEC-Q100 automotive qualified
  • ISO 26262 ASIL B(D) compliant — functional safety ready
  • Fast power-up with first-edge detection
  • Low cut-off frequency — supports low-speed operation
  • 1.8nF overmolded capacitor — enhanced EMC and microbreak resistance (C variant)
  • Small pitch capability — 2mm Hall element distance
  • Proven in use argumentation — hundreds of millions deployed
  • PG-SSO-2 package for PCB mounting
  • RoHS compliant and lead-free

Applications

  • Anti-Lock Braking Systems (ABS)
  • Electronic Stability Program (ESP)
  • Wheel speed sensing — automotive
  • Vehicle dynamics control systems
  • Transmission speed sensing
  • Automotive motor position sensing
  • Rotational speed measurement
  • Chassis control systems
  • Automotive safety systems
  • Industrial speed sensing (derivative)
Product Introduction: TLE4941PLUSC Product Introduction

The TLE4941PLUSC from Infineon Technologies is a state-of-the-art differential Hall-effect speed sensor IC designed specifically for demanding automotive wheel speed sensing applications. As part of Infineon’s XENSIV™ sensor portfolio, this device represents the latest generation of the highly successful TLE4941 family, with hundreds of millions of units already deployed in the field. Built on advanced BiCMOS technology, the TLE4941PLUSC integrates two Hall probes (with 2mm spacing for small pitch compatibility), a differential amplifier, comparator, digital signal processing, and a two-wire current output stage on a single monolithic chip. The differential sensing principle makes the device immune to stray magnetic fields and common-mode disturbances, ensuring reliable operation in the harsh automotive environment. A sophisticated dynamic self-calibration algorithm automatically cancels both magnetic and device offsets within the first 4 magnetic edges after power-up, with an initial calibration delay of just 300µs maximum. The first-edge-detection feature provides a reliable output signal even before full calibration is complete. The two-wire current interface (7mA low / 14mA high output) minimizes wiring complexity and is the standard interface for active wheel speed sensors. With its integrated 1.8nF overmolded capacitor (C variant), the device offers enhanced EMC robustness and microbreak resistance without any external components. Qualified to AEC-Q100 automotive standards and ISO 26262 ASIL B(D) compliant for functional safety, the TLE4941PLUSC in the PG-SSO-2 package is the ideal choice for ABS, ESP, and vehicle dynamics control systems.

Working Principle: TLE4941PLUSC Working Principle

The TLE4941PLUSC operates on the principle of the Hall effect, where a voltage difference (Hall voltage) is generated across a current-carrying conductor placed in a magnetic field perpendicular to the current flow. The device contains two Hall probe elements separated by a 2mm distance on the silicon die. When a toothed or magnetic encoder wheel rotates near the sensor, the magnetic field strength at each Hall probe changes differentially as the teeth/poles pass by. The differential signal from the two Hall probes is amplified by a preamplifier and fed to a comparator that detects zero crossings of the differential magnetic field. The comparator output drives a current modulator that switches between two current levels (7mA low, 14mA high) on the two-wire supply line, encoding the speed information as current pulses that can be detected by the ECU. A digital signal processing (DSP) block implements dynamic self-calibration, continuously adjusting offset DACs to cancel out temperature-dependent and mechanical offsets in real-time. This calibration algorithm requires approximately 4 magnetic edges to reach full accuracy after power-up. The device also includes a bandgap reference for stable biasing, an oscillator for system clock, power supply management with undervoltage detection, and ESD protection structures. When no magnetic edges are detected for an extended period (> 590ms), the device automatically resets its calibration and enters a low-power standby state, re-calibrating when movement resumes. The overmolded 1.8nF capacitor (C variant) is integrated into the package for enhanced EMC performance and protection against microbreaks in the wiring harness.

Pin Description: TLE4941PLUSC Pin Definition and Functions
Pin Name Type Description
1 VDD / Supply Power / Signal Positive supply voltage pin — also carries the two-wire current modulated output signal (7mA low / 14mA high)
2 GND Ground Ground / negative supply pin

Note: The PG-SSO-2 is a 2-pin single-sided outpackage (SSO) for PCB mounting. The TLE4941PLUSC uses a two-wire current interface protocol where both power and speed information are transmitted over the same two wires. The supply current level (7mA or 14mA) encodes the magnetic state. The C variant includes an integrated 1.8nF overmolded capacitor between VDD and GND for EMC filtering.

Application Scenarios: In which products and applications is TLE4941PLUSC used
  • Anti-Lock Braking Systems (ABS): The primary application — each wheel uses a TLE4941PLUSC sensor to measure rotational speed, providing the ABS controller with precise wheel speed data for slip control and brake modulation
  • Electronic Stability Program (ESP): Wheel speed data from these sensors is used by ESP systems for vehicle dynamics control, including traction control and yaw stability management
  • Transmission Speed Sensing: Used in automatic and dual-clutch transmissions for input and output shaft speed measurement, supporting gear shift control and torque converter slip detection
  • Chassis Control Systems: Deployed in active suspension systems, electronic power steering (EPS) assist calculation, and other chassis control functions requiring wheel speed information
  • Automotive Safety Systems: Serves as a key input to vehicle safety systems including rollover protection, hill start assist, and hill descent control systems
  • Motor Position Sensing: Used in automotive motors (blower, coolant pump, fuel pump) for closed-loop speed control and tachometer feedback
  • Industrial Speed Sensing: Suitable for industrial motor control, conveyor systems, and rotational speed measurement applications requiring high reliability
  • EV/HEV Applications: Used in electric and hybrid vehicles for wheel speed sensing in regenerative braking control and vehicle dynamics management
Alternative Models: What chips are recommended as replacements for TLE4941PLUSC
Model Manufacturer Type Interface Package
TLE4941PLUSC (plus C) Infineon Differential Hall 2-wire current SSO-2 (with 1.8nF cap)
TLE4941-2C Infineon Differential Hall 2-wire current SSO-2 (previous gen)
TLE4942-2C Infineon Differential Hall (with dir.) 2-wire current SSO-2 (direction detection)
ATS642 Allegro Micro Differential Hall 2-wire current SIP-2
MLX92211 Melexis Differential Hall 2-wire current TSOT-23

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1