Opens in a new tab

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

5280

Effective Inventory

Image for reference only

Manufacturer Part:

IL485E

Package:

SOIC-16 WB

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IL485E is an isolated RS-485/RS-422 transceiver from NVE Corporation’s IsoLoop® family. This device integrates a fully featured differential line driver/receiver with 2.5kVrms galvanic isolation using Giant Magnetoresistive (GMR) technology, providing robust serial communication in electrically harsh environments.

Key Specifications

Manufacturer NVE Corporation
Device Type Isolated RS-485/RS-422 Transceiver
Isolation Voltage 2.5 kVrms
Data Rate 35 Mbps (max)
Supply Voltage 3.0V to 5.5V (both sides)
Bus Voltage Range -15V to +15V
Number of Nodes Up to 256
Package SOIC-16 Wide Body
Operating Temperature -40°C to +125°C

Features

  • GMR-based galvanic isolation (IsoLoop technology)
  • 2.5kVrms isolation voltage rating
  • High data rate: up to 35 Mbps
  • Half-duplex RS-485/RS-422 compliant
  • Wide supply range: 3.0V to 5.5V both sides
  • True fail-safe receiver inputs
  • Driver output short-circuit protection
  • Thermal shutdown protection
  • Industrial temperature range

Applications

  • Industrial RS-485 networking
  • Building automation systems
  • Industrial process control
  • HVAC control networks
  • Security and access control systems
  • Isolated sensor interfaces
  • Test and measurement equipment
  • Renewable energy systems
Product Introduction: IL485E Product Introduction

The IL485E is NVE Corporation’s high-speed isolated RS-485/RS-422 transceiver featuring IsoLoop® GMR isolation technology. This device combines a complete RS-485 differential line driver and receiver with 2.5kVrms galvanic isolation in a single 16-pin wide-body SOIC package. Capable of data rates up to 35Mbps, the IL485E is ideal for high-speed industrial communication networks requiring robust galvanic isolation. The device features true fail-safe receiver design, driver short-circuit protection, and thermal shutdown to ensure reliable operation under all conditions. Its wide 3.0V to 5.5V supply range on both sides of the isolation barrier provides maximum design flexibility.

Working Principle: IL485E Working Principle

The IL485E uses NVE’s patented IsoLoop Giant Magnetoresistive (GMR) isolation technology to provide signal isolation without the limitations of optocouplers. Digital data is converted into magnetic signals that cross the isolation barrier and are detected by magnetoresistive sensors on the opposite side. This technology offers superior long-term reliability compared to optoelectronic isolation methods. On the bus side, the RS-485 transceiver uses a differential current-steering architecture to drive the A and B bus lines with controlled slew rates for EMC performance. The receiver detects differential voltages on the bus and converts them back to single-ended logic signals on the isolated side.

Pin Description: IL485E Pin Definition and Functions
Pin Number Pin Name Function
1 VDD1 Logic Side Power Supply (3.0-5.5V)
2 RO Receiver Output (Logic Side)
3 DE Driver Enable Input
4 DI Driver Input (Logic Side)
5 GND1 Logic Side Ground
6 NC No Connection
7 NC No Connection
8 NC No Connection
9 GND2 Bus Side Ground
10 A Non-Inverting Bus Line (RS-485 A)
11 B Inverting Bus Line (RS-485 B)
12 NC No Connection
13 NC No Connection
14 NC No Connection
15 RE Receiver Enable Input (Active Low)
16 VDD2 Bus Side Power Supply (3.0-5.5V)
Application Scenarios: In which products and applications is IL485E used
  • Industrial RS-485 and Modbus networks
  • Building automation and HVAC controls
  • Factory floor automation systems
  • Security and access control networks
  • Isolated sensor and transducer interfaces
  • Test and measurement equipment
  • Renewable energy monitoring systems
  • Medical device communication
Alternative Models: What chips are recommended as replacements for IL485E
Model Manufacturer Description
IL485T NVE 250kbps low-speed version
IL488E NVE Full-duplex RS-422 version
ADM2483 Analog Devices Alternative isolated RS-485 transceiver

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1