Opens in a new tab

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

6874

Effective Inventory

Image for reference only

Manufacturer Part:

ISO1176TDWR

Package:

SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ISO1176TDWR is a high-speed isolated RS-485/RS-422 transceiver with integrated transformer driver from Texas Instruments. This device combines a galvanically isolated differential line transceiver with an integrated oscillator/transformer driver that provides isolated power, eliminating the need for an external isolated power supply. Supporting data rates up to 40 Mbps, the ISO1176T features basic isolation rated for 2500 Vrms (1 min) and 4242 Vpk (VDE, 60s). With high common-mode transient immunity (CMTI) of 25 kV/µs minimum, the device maintains robust operation in noisy industrial environments. The receiver includes fail-safe circuitry for open, shorted, or idle bus conditions. Housed in a 16-pin wide-body SOIC package, the ISO1176TDWR is ideal for industrial automation, building automation, and power grid communication applications.

Key Specifications

Manufacturer Texas Instruments
Product Type Isolated RS-485/RS-422 Transceiver
Protocol Standard TIA/EIA-485-A, EN 50170 (Profibus)
Data Rate Up to 40 Mbps
Configuration Half-Duplex
Isolation Type Basic Isolation (Capacitive)
Withstand Voltage 2500 Vrms (1 minute, UL 1577)
Transient Isolation 4242 Vpk (VDE V 0884-10, 60s)
Working Isolation 400 Vrms
Surge Isolation 4000 Vpk
CMTI (Min/Typ) 25 / 50 kV/µs
Supply Voltage (VCC1) 3.3 V (primary side)
Unit Load 1/8 UL (up to 256 nodes)
Bus Capacitance 10 pF (max)
Diff. Output Voltage > 2.1 V (54Ω load)
Power Efficiency > 60% typical (at 100mA)
Operating Temperature -40°C to +85°C
Package SOIC-16 (DW, wide-body)

Features

  • 40 Mbps maximum data rate for high-speed communication
  • Integrated transformer driver for isolated power supply
  • Greater than 60% efficiency at 100mA load
  • 2500 Vrms basic isolation (1 minute, UL 1577)
  • 4242 Vpk VDE 0884-10 certification
  • 25 kV/µs minimum common-mode transient immunity
  • Fail-safe receiver for open, shorted, or idle bus
  • 1/8 unit load supports up to 256 bus nodes
  • Low 10 pF bus capacitance reduces signal distortion
  • Differential output exceeds 2.1V across 54Ω load
  • Wide-body SOIC-16 package provides creepage/clearance
  • Qualified per VDE and UL safety standards

Applications

  • Industrial automation and process control networks
  • Profibus DP and RS-485 fieldbus systems
  • Building automation and HVAC control systems
  • Smart grid and utility communication
  • Motor drives and industrial servo systems
  • Isolated data acquisition systems
  • Telecommunications and networking equipment
Product Introduction: ISO1176TDWR Product Introduction

The ISO1176TDWR is a galvanically isolated RS-485/RS-422 transceiver with integrated transformer driver from Texas Instruments. Designed for high-speed industrial communication applications, this device provides both signal isolation and integrated power isolation, simplifying the design of isolated RS-485 and Profibus interfaces. The ISO1176T combines a high-speed differential line transceiver with a capacitive isolation barrier and an integrated DC-DC oscillator/transformer driver. When paired with an external transformer, the device generates its own isolated secondary supply, eliminating the need for a separate isolated power module. Supporting data rates up to 40 Mbps, the transceiver is well-suited for Profibus DP and other high-speed industrial fieldbus protocols. The device features basic isolation with 2500 Vrms withstand voltage (UL 1577, 1 minute) and 4242 Vpk transient isolation voltage (VDE V 0884-10, 60 seconds). Common-mode transient immunity (CMTI) is guaranteed at a minimum of 25 kV/µs, with a typical value of 50 kV/µs, ensuring robust operation in electrically noisy industrial environments. The receiver includes a failsafe feature that outputs a logic high when the bus is open, shorted, or idle. With a 1/8 unit load input impedance, up to 256 transceivers can be connected to a single bus segment. The ISO1176TDWR is supplied in a 16-pin wide-body SOIC (DW) package that provides sufficient creepage and clearance distances for safety isolation requirements.

Working Principle: ISO1176TDWR Working Principle

The ISO1176TDWR operates as a fully integrated isolated RS-485 transceiver with built-in power isolation. Its functional architecture includes: 1) Primary-Side Circuitry: The primary side (low-voltage side) interfaces with the host microcontroller via UART-style signals (DI – data in, RO – receiver output, DE – driver enable, RE# – receiver enable). This side also contains the integrated oscillator and MOSFET driver for the external isolation transformer. The device operates from a single 3.3V supply on the primary side. 2) Capacitive Isolation Barrier: High-voltage silicon dioxide capacitors form the isolation barrier, transmitting digital data and control signals across the galvanic boundary while blocking high voltages and common-mode noise. This capacitive isolation technology provides high CMTI (common-mode transient immunity) and long-term reliability. 3) Secondary-Side RS-485 Transceiver: The isolated secondary side contains a full-featured RS-485 transceiver with differential A and B bus pins. The driver and receiver are independently controlled through the isolated DE and RE# signals. The receiver features a failsafe input stage that ensures a high output level when the bus is open-circuited, short-circuited, or idle with all drivers disabled. 4) Integrated Power Isolation: A DC-DC controller on the primary side drives an external center-tapped transformer primary winding. The transformer secondary provides the isolated supply for the secondary-side circuitry. This integrated approach significantly reduces system cost and board space compared to using a separate digital isolator and isolated power module.

Pin Description: ISO1176TDWR Pin Definition and Functions
Pin Number Pin Name Side Type Function Description
1 VCC1 Primary Power Primary supply voltage input (3.3V)
2 GND1 Primary Ground Primary ground reference
3 DE Primary Input Driver enable (active high)
4 RE Primary Input Receiver enable (active low, RE#)
5 DI Primary Input Driver input / transmit data
6 RO Primary Output Receiver output / receive data
7 DCD1 Primary Output DC-DC controller drive output 1
8 DCD2 Primary Output DC-DC controller drive output 2
9, 10 NC Isolation – No connect (isolation spacing)
11 B Secondary I/O RS-485 differential B line
12 A Secondary I/O RS-485 differential A line
13 VCC2 Secondary Power Isolated secondary supply output
14 GND2 Secondary Ground Isolated secondary ground
15, 16 NC Secondary – No internal connection
Application Scenarios: In which products and applications is ISO1176TDWR used
  • Profibus DP and RS-485 industrial fieldbus networks
  • Industrial PLC communication interfaces and I/O modules
  • Building automation systems (HVAC, lighting, security)
  • Smart grid and substation automation communication
  • Motor drive, VFD, and servo control communication ports
  • Isolated sensor networks and data acquisition
  • Telecommunications and networking equipment requiring isolation
Alternative Models: What chips are recommended as replacements for ISO1176TDWR
Manufacturer Part Number Package Notes
Texas Instruments ISO1176TDWR-1 SOIC-16 Same device, alternative part number suffix
Texas Instruments ISO3086DWR SOIC-16 Isolated RS-485, 500kbps, full duplex
Analog Devices ADM2486BRWZ SOIC-16 Isolated RS-485, 25Mbps, 5kV
MaxLinear SP339EER1-L SOIC-14 RS-485 transceiver (non-isolated)
NXP PCA9600DP SOIC-8 I2C bus extender (not RS-485)

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1