Opens in a new tab

KSZ8041NL

10/100 Ethernet PHY transceiver, MII/RMII, 32-QFN, low power

7832

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8041NL

Package:

32-pin QFN (5 x 5 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The KSZ8041NL is a single-chip 10Base-T/100Base-TX physical layer transceiver (PHY) manufactured by Microchip Technology (formerly Micrel). This low-power CMOS device provides a complete physical layer solution for 10/100 Mbps Ethernet applications, supporting both MII (Media Independent Interface) and RMII (Reduced MII) interfaces for flexible connection to MAC layer controllers. The KSZ8041NL features HP Auto MDI/MDI-X, which automatically corrects for crossover and straight-through cable configurations. With low power consumption of less than 180mW and advanced power management modes, the device is ideal for power-sensitive applications. Packaged in a compact 32-pin QFN package (5x5mm), the KSZ8041NL is suitable for printers, IP phones, set-top boxes, game consoles, and other embedded Ethernet applications.

Key Specifications

Manufacturer Microchip Technology (Micrel)
Product Type 10/100 Ethernet Physical Layer Transceiver (PHY)
Standard Compliance IEEE 802.3u
Data Rates 10 Mbps (10Base-T) / 100 Mbps (100Base-TX)
Interface MII (Media Independent Interface) + RMII
Supply Voltage 3.3 V (single supply, internal 1.8V regulator)
Power Consumption < 180 mW (typical)
HP Auto MDI/MDI-X Yes (automatic crossover detection)
Cable Length Up to 100m (Category 5 cable)
Jumbo Frame Support Up to 2000 bytes
Operating Temperature 0°C to +70°C (commercial grade)
Temperature Grade (AM) -40°C to +85°C (industrial/automotive)
Package 32-pin QFN (5 x 5 mm)
ESD Rating 6 kV (HBM)
Status In Production

Features

  • Single-chip 10Base-T/100Base-TX physical layer solution
  • Fully compliant with IEEE 802.3u standard
  • Low power CMOS design, less than 180mW
  • HP Auto MDI/MDI-X for automatic cable correction
  • Robust operation over standard CAT5 cable
  • Power-down and power-saving modes
  • MII interface (KSZ8041NL variant)
  • RMII interface support with external 50MHz clock
  • LinkMD® TDR-based cable diagnostics
  • Programmable LED outputs (link, activity, speed)
  • Interrupt pin option for system event notification
  • MIIM (MDC/MDIO) management interface up to 6.25MHz
  • 3.3V single supply with integrated 1.8V regulator

Applications

  • Printers and multi-function peripherals
  • LOM (LAN on Motherboard) and embedded systems
  • Game consoles and gaming accessories
  • IPTV and set-top boxes
  • IP phones and VoIP devices
  • IP set-top boxes and OTT devices
  • Industrial control and factory automation
  • Networked medical and test equipment
Product Introduction: KSZ8041NL Product Introduction

The KSZ8041NL from Microchip Technology (formerly Micrel) is a highly integrated, low-power 10Base-T/100Base-TX Ethernet physical layer transceiver (PHY). Designed for embedded and consumer networking applications, this device provides a complete physical layer solution in a compact 32-pin QFN package. The KSZ8041NL supports both MII and RMII interfaces, offering flexibility for connection to various MAC/controller devices. HP Auto MDI/MDI-X technology eliminates the need for crossover cables by automatically detecting and correcting cable wiring configurations. The device features advanced power management including power-down mode and power-saving modes, with total power consumption under 180mW, making it suitable for power-sensitive and portable applications. Integrated 1.8V regulator allows operation from a single 3.3V supply, reducing external component count and system cost. The KSZ8041NL includes LinkMD® TDR-based cable diagnostics for detecting cable faults, programmable LED outputs for status indication, and an interrupt pin for system event notification. The MIIM management interface supports access to all PHY control and status registers. Available in commercial (0°C to 70°C) and industrial/automotive (-40°C to 85°C) temperature grades, the KSZ8041NL is ideal for printers, IP phones, set-top boxes, game consoles, industrial controls, and other 10/100 Ethernet applications.

Working Principle: KSZ8041NL Working Principle

The KSZ8041NL operates as a complete 10/100 Ethernet physical layer transceiver with MII/RMII interface. Its architecture consists of: 1) MII/RMII Interface: The device supports both Media Independent Interface (MII) and Reduced MII (RMII) for connecting to the MAC layer. The MII interface uses separate transmit and receive data buses (4 bits each) with associated clock and control signals. The RMII interface reduces pin count by using a 2-bit wide data path with a 50MHz reference clock. The interface mode is configured via strap pins at power-up. 2) 100Base-TX Transmitter: The transmit path accepts 4-bit nibble data from the MAC at 25MHz (MII mode), performs parallel-to-serial conversion, 4B/5B encoding, NRZ-to-NRZI conversion, and MLT-3 line coding before driving the differential output onto the twisted-pair cable via an external magnetic transformer. The transmitter includes adaptive equalization and waveform shaping for optimal signal quality. 3) 100Base-TX Receiver: The receive path performs MLT-3 decoding, clock and data recovery, NRZI-to-NRZ conversion, 4B/5B decoding, and serial-to-parallel conversion to reconstruct the 4-bit nibble data for the MAC. The receiver includes adaptive equalization to compensate for cable attenuation at 100m distances. HP Auto MDI/MDI-X automatically swaps transmit/receive pairs if needed. 4) 10Base-T Transceiver: For 10Mbps operation, the device uses Manchester encoding/decoding with the standard 10Base-T signaling. The same twisted-pair interface is shared between 10Mbps and 100Mbps modes, with automatic speed detection via auto-negotiation. 5) Management and Control: The MIIM (MDC/MDIO) interface provides access to IEEE standard PHY registers (0-31) as well as vendor-specific extended registers. Auto-negotiation automatically selects the best common speed and duplex mode with the link partner.

Pin Description: KSZ8041NL Pin Definition and Functions
Pin Group Pins Function
Power/GND VDDIO, VDDA, VDDL, GND 3.3V I/O supply, analog supply, 1.8V core (internal reg), ground
MII RX RXD[3:0], RXDV, RXER, RXCLK Receive data bus (4-bit), data valid, error, receive clock
MII TX TXD[3:0], TXEN, TXER, TXCLK Transmit data bus (4-bit), enable, error, transmit clock
RMII RXD[1:0], CRS_DV, TXD[1:0], TXEN, REF_CLK RMII receive/transmit data (2-bit), carrier sense, 50MHz ref clock
MIIM MDC, MDIO Management data clock, management data I/O
LED LED0, LED1 Programmable LED outputs (link, activity, speed, duplex)
Interrupt INTRP Interrupt output (open-drain, active low)
MDI TX+, TX-, RX+, RX- Differential transmit/receive (twisted pair interface)
Configuration CONFIG0-2, RXD[3:0] straps Mode configuration strap pins (sampled at reset)
Reset RESET# Chip reset (active low)
Application Scenarios: In which products and applications is KSZ8041NL used
  • Laser and inkjet printers with network connectivity
  • LAN on Motherboard (LOM) for embedded x86 and ARM systems
  • IPTV set-top boxes and OTT streaming devices
  • VoIP phones and video conferencing endpoints
  • Gaming consoles and networked gaming accessories
  • Industrial control equipment and factory automation
  • Networked test and measurement instruments
  • IP-based security cameras and NVR systems
Alternative Models: What chips are recommended as replacements for KSZ8041NL
Manufacturer Part Number Package Notes
Microchip KSZ8041RNL 24-QFN RMII only, no MII
Microchip KSZ8041TL 48-TQFP RMII/SMII, more features
Microchip KSZ8081RNBCA 24-QFN Newer 10/100 PHY generation
Texas Instruments DP83848J 48-LQFP 10/100 Ethernet PHY, MII/RMII
Realtek RTL8201F 32-QFN Single-chip 10/100M Ethernet PHY

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1