Opens in a new tab

LMZ12003TZ-ADJ

3A SIMPLE SWITCHER Power Module, 4.5V-20V In, Integrated Inductor, TO-PMOD

11431

Effective Inventory

Image for reference only

Manufacturer Part:

LMZ12003TZ-ADJ

Package:

TO-PMOD-7 (7-Pin Power Module), 10.16 x 13.46 x 4.57 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMZ12003TZ-ADJ is a 3A step-down power module from Texas Instruments SIMPLE SWITCHER family, integrating the DC-DC controller, power MOSFETs, and a shielded inductor into a single TO-PMOD package. Operating from a 4.5V to 20V input range, this device delivers an adjustable output from 0.8V to 6V with efficiencies up to 92%. The integrated inductor dramatically simplifies design, reducing the external component count to just a few capacitors and resistors. The innovative TO-PMOD package provides excellent thermal performance with an exposed bottom pad, making it ideal for compact point-of-load power supplies in industrial, telecom, and datacom applications.

Key Specifications

Parameter Value
Manufacturer Texas Instruments
Part Number LMZ12003TZ-ADJ
Product Category Integrated Power Modules (μModule)
Topology Synchronous Buck (Step-Down)
Input Voltage Range 4.5V to 20V
Output Voltage Range 0.8V to 6V (adjustable)
Output Current 3A continuous
Switching Frequency 500kHz (fixed)
Integrated Inductor Yes, shielded ferrite inductor
Peak Efficiency Up to 92%
Package / Case TO-PMOD-7 (Power Module)
Operating Temperature -40°C to +125°C

Features

  • Integrated shielded inductor — minimal external components
  • 4.5V to 20V input voltage range
  • 3A continuous output current capability
  • Adjustable output from 0.8V to 6V
  • Synchronous rectification for high efficiency (up to 92%)
  • Fixed 500kHz switching frequency
  • Internal compensation — easy to design with
  • Soft-start and enable pin for power sequencing
  • Power-good output flag
  • TO-PMOD package with exposed thermal pad
  • Thermal shutdown, overcurrent, and overvoltage protection

Applications

  • Point-of-load (POL) power supplies
  • FPGA, DSP, and processor core power
  • Telecom and datacom equipment
  • Industrial control and automation
  • Distributed power architectures
Product Introduction: LMZ12003TZ-ADJ Product Introduction

The LMZ12003TZ-ADJ is a complete 3A step-down DC-DC power module from Texas Instruments SIMPLE SWITCHER family. This device integrates the switching regulator controller, power MOSFETs (both high-side and low-side for synchronous operation), and a shielded inductor into a single, easy-to-use TO-PMOD package.

What sets the LMZ12003 apart from discrete buck converter solutions is its extreme ease of use. With the inductor already integrated and internal compensation handling loop stability, designers need only add an input capacitor, output capacitor, and two feedback resistors to create a complete 3A power supply. This dramatically reduces design time, PCB layout complexity, and the risk of design errors.

The device operates from 4.5V to 20V input and provides an adjustable output from 0.8V to 6V. Synchronous rectification delivers high efficiency — up to 92% — reducing thermal requirements and extending battery life in portable applications. The 500kHz fixed switching frequency balances component size with efficiency.

The TO-PMOD package features a large exposed thermal pad on the bottom that provides a low thermal resistance path to the PCB, enabling reliable 3A operation without a heat sink. The package style is similar to a standard TO-263, making it compatible with standard PCB assembly processes. The LMZ12003 is fully supported by TI WEBENCH Power Designer for fast and accurate design.

Working Principle: LMZ12003TZ-ADJ Working Principle

The LMZ12003 is a synchronous buck power module with integrated inductor, operating on the following principles:

1. Control Architecture: The device uses voltage-mode control with internal Type III compensation. The feedback voltage (from an external resistor divider on the FB pin) is compared against the internal 0.8V bandgap reference by the error amplifier. The error signal drives a PWM comparator that generates the timing for both high-side and low-side MOSFETs.

2. Synchronous Rectification: Unlike non-synchronous buck converters that use a Schottky diode for freewheeling, the LMZ12003 uses a second (low-side) N-MOSFET that conducts during the off-time. This reduces conduction losses significantly, improving efficiency especially at low output voltages and high load currents.

3. Switching Cycle (On-Time): The high-side N-MOSFET is turned on, and current flows from VIN through the integrated inductor to the output. The inductor current ramps up linearly at di/dt = (VIN – VOUT)/L. The output capacitor filters the ripple current.

4. Switching Cycle (Off-Time): The high-side MOSFET turns off, and the low-side MOSFET turns on after a brief dead time (to prevent shoot-through). The inductor current flows through the low-side MOSFET, still delivering current to the output. The inductor current ramps down at di/dt = -VOUT/L.

5. Integrated Inductor: A shielded ferrite inductor is integrated within the module package. Shielding reduces EMI radiation and provides predictable performance. The inductor value is optimized for 500kHz operation and 3A output current.

6. Protection: Cycle-by-cycle current limit protects both MOSFETs and the inductor. Output overvoltage protection clamps excessive output voltage. Thermal shutdown disables switching if the die temperature exceeds safe limits. Soft-start gradually ramps the output voltage to prevent inrush current at power-up.

Pin Description: LMZ12003TZ-ADJ Pin Definition and Functions
Pin Name Type Description
1 FB Input Feedback input. Connect resistor divider from VOUT to FB to AGND. Regulation point = 0.8V. Use 1% tolerance resistors for best accuracy.
2 EN Input Enable input. Drive above 1.2V to enable, below 0.4V to disable. Can be used for power sequencing. Do not leave floating — tie to VIN if unused.
3 PG Output Power-good open-drain output. Goes low when VOUT is within -10% of regulation. Requires external pull-up resistor to VOUT or another rail.
4 AGND Ground Analog ground. Reference ground for feedback and control circuitry. Connect to ground plane.
5 PGND Ground Power ground. Return path for high-current switching. Provide robust copper area and connect to AGND at a single point.
6 VOUT Output Regulated output voltage. Connect output capacitors and load here. Multiple pins internally connected for low resistance.
7 VIN Power Input Input voltage supply (4.5V to 20V). Bypass with ceramic capacitors placed close to the pin, connected to PGND.
Pad EP Thermal Exposed thermal pad on bottom of package. Solder to PCB ground plane with multiple vias for maximum heat dissipation.
Application Scenarios: In which products and applications is LMZ12003TZ-ADJ used
  • Point-of-load regulators for FPGA, ASIC, and DSP power
  • 12V to 3.3V / 2.5V / 1.8V / 1V core supply
  • Telecom and datacom line card power supplies
  • Industrial PLC and embedded system power
  • Rapid-prototyping and evaluation board designs
Alternative Models: What chips are recommended as replacements for LMZ12003TZ-ADJ
Manufacturer Part Number Package Notes
TI LMZ12003TZ-5.0 TO-PMOD Fixed 5V output version
TI LMZ12001TZ-ADJ TO-PMOD 1A lower current version
TI LMZ12005TZ-ADJ TO-PMOD 5A higher current version
TI LMZ31707 QFN 7A 17V input power module
ADI LTM4620 LGA Dual 13A μModule regulator
MPS MPSM0120 QFN 20A 16V power module

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1