Opens in a new tab

LTC4265CDETRPBF

IEEE 802.3af PoE PD Interface Controller, Integrated Switch, DFN-12

4902

Effective Inventory

Image for reference only

Manufacturer Part:

LTC4265CDETRPBF

Package:

DFN-12 (3 x 4 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC4265CDETRPBF is a Power over Ethernet (PoE) Powered Device (PD) interface controller from Analog Devices, fully compliant with the IEEE 802.3af standard. This device integrates a 0.45Ω power MOSFET, eliminating the need for an external FET and reducing component count and board space. Features include a 25kΩ signature resistor for PD detection, programmable classification current, undervoltage lockout with hysteresis, and inrush current limiting. Operating from 13V to 57V working voltage, the LTC4265 is ideal for VoIP phones, wireless access points, IP cameras, and other PoE-powered devices requiring a compact, standards-compliant PD interface.

Key Specifications

Parameter Value
Manufacturer Analog Devices
Part Number LTC4265CDETRPBF
Product Category PoE PD Interface Controllers
Standard Compliance IEEE 802.3af (Type 1, Class 0-4)
Working Voltage Range 13V to 57V
Integrated MOSFET Yes, 0.45Ω RDS(ON)
Signature Resistor 25kΩ (integrated)
Classification Programmable (Class 0-4)
Inrush Current Limit ≤150mA (802.3af compliant)
UVLO Threshold ~36V rising, ~30V falling (typical)
Package / Case DFN-12 (3×4mm)
Operating Temperature -40°C to +125°C

Features

  • IEEE 802.3af compliant Powered Device (PD) interface
  • Integrated 0.45Ω power MOSFET — no external FET needed
  • Integrated 25kΩ signature resistor for PD detection
  • Programmable classification current (Class 0-4)
  • Undervoltage lockout (UVLO) with hysteresis
  • Inrush current limiting during power-up
  • Working voltage: 13V to 57V
  • Thermal shutdown protection
  • Power good (PGD) output flag
  • Compact DFN-12 (3×4mm) package
  • Available in DFN-8 and SO-8 packages also

Applications

  • VoIP phones and video phones
  • Wireless access points and Wi-Fi routers
  • IP cameras and surveillance systems
  • Industrial Ethernet devices and sensors
  • Power over Ethernet (PoE) powered equipment
  • IPTV set-top boxes and thin clients
Product Introduction: LTC4265CDETRPBF Product Introduction

The LTC4265CDETRPBF is a fully IEEE 802.3af compliant Power over Ethernet (PoE) Powered Device (PD) interface controller from Analog Devices. This device provides all the necessary interface functions between the Ethernet cable and the PD’s local power supply, including detection, classification, inrush current limiting, and power switch control.

In a PoE system, the Power Sourcing Equipment (PSE) detects and classifies PDs before applying full power. The LTC4265 handles all the required handshaking: it presents a 25kΩ signature resistance during detection so the PSE can identify it as a valid PD, and it provides a programmable classification current so the PSE knows how much power the device needs (Class 0 through Class 4, up to 12.95W at the PD).

A key feature of the LTC4265 is its integrated 0.45Ω power MOSFET. Unlike older PD controllers that require an external series MOSFET, the LTC4265 integrates the main power switch, reducing component count, board space, and cost. The integrated MOSFET also ensures precise current limiting and thermal protection.

The device includes undervoltage lockout (UVLO) with hysteresis to ensure that power is only applied to the load when the input voltage is above the minimum threshold. Inrush current limiting controls the rate at which the load capacitance is charged, preventing voltage drops on the Ethernet cable that could affect other devices. A power good (PGD) output signals when the output is ready, enabling the downstream DC-DC converter to start up.

Working Principle: LTC4265CDETRPBF Working Principle

The LTC4265 operates as a PoE PD interface with the following functional phases:

1. Detection Phase: When the Ethernet cable is first plugged in, the PSE applies a low voltage (2.7V to 10.1V) and measures the current to detect the PD signature. The LTC4265 presents a 25kΩ resistance (with some capacitance) during this phase, identifying itself as a valid PoE device.

2. Classification Phase: After successful detection, the PSE applies a higher voltage (15.5V to 20.5V) and measures the classification current. The LTC4265 sources a classification current determined by the resistor on the CLASS pin. Different current levels correspond to different power classes (Class 0 = 15.4W at PSE, Class 1 = 4W, Class 2 = 7W, Class 3 = 15.4W, Class 4 = reserved).

3. Power-Up Phase: After classification, the PSE applies full voltage (44V to 57V). The LTC4265 begins the power-up sequence when VDD exceeds the UVLO rising threshold (~36V). The internal power MOSFET is gradually turned on, charging the output capacitor with a controlled inrush current (limited to ≤150mA per 802.3af).

4. Normal Operation: Once the output capacitor is charged and the MOSFET is fully on, the device enters normal operation. The PGD (power good) output goes high, signaling that power is good and the downstream DC-DC converter can start up. In normal mode, the LTC4265 acts as a low-resistance switch between the input (VDD) and output (RTN).

5. Protection Features: The LTC4265 includes thermal shutdown that turns off the MOSFET if the die temperature exceeds safe limits. It also includes overcurrent protection and undervoltage lockout with hysteresis to prevent operation at abnormally low voltages.

6. Mark/Event Detection: The LTC4265 supports the optional Mark event (maintain power signature) as specified in 802.3af, allowing the PSE to briefly reduce voltage for signaling purposes without causing the PD to power down.

Pin Description: LTC4265CDETRPBF Pin Definition and Functions
Pin Name Type Description
1 CLASS I/O Classification current programming. Resistor to VSS sets classification level (Class 0-4). Leave floating for Class 0 default.
2 DCD I/O DC disconnect pin. Optional DC disconnect resistor. Can be left floating for AC disconnect (default 802.3af behavior).
3 PGD Output Power-good output. Open-drain output that goes high (with external pull-up) when output power is good and inrush is complete.
4 VSS Ground Negative input supply / return. Connect to the negative side of the PoE input (spare pair or center-tap of transformer).
5 VSS Ground Second VSS pin. Connected internally. Both pins connected externally for low resistance.
6 RTN Output Negative output / return. Connect to the return side of the load and output capacitor. Source of internal MOSFET.
7 RTN Output Second RTN pin. Connected internally. Both pins connected externally.
8 RTN Output Third RTN pin for high-current path.
9 SHDN Input Shutdown input. Pull low to disable output, drive high for normal operation. Optional function.
10 T1 Test Test pin. For production testing only. Leave unconnected or tie to VSS in application.
11 VDD Power Input Positive input supply. Connect to positive side of PoE input. Working voltage 13V to 57V. Drain of internal MOSFET.
12 VDD Power Input Second VDD pin. Connected internally. Both VDD pins connected together externally.
Pad EP Thermal Exposed thermal pad on bottom. Solder to VSS or RTN plane for thermal dissipation.
Application Scenarios: In which products and applications is LTC4265CDETRPBF used
  • VoIP phones and video conference endpoints
  • Wi-Fi access points and wireless routers
  • IP security cameras and NVR systems
  • Industrial Ethernet sensors and IoT gateways
  • IPTV set-top boxes and digital signage
  • Thin clients and networked printers
Alternative Models: What chips are recommended as replacements for LTC4265CDETRPBF
Manufacturer Part Number Package Notes
Analog Devices LTC4265CDD DFN-8 Same device in DFN-8 package
Analog Devices LTC4265CS8 SO-8 Same device in SO-8 package
Analog Devices LTC4267 DFN PoE PD with integrated DC-DC
Silicon Labs Si3402 QFN PoE PD interface controller
Texas Instruments TPS23753 SO-8 PoE PD interface with DC-DC ctrl
Microchip PD69108 QFN 8-port PoE PSE controller

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1