Opens in a new tab

LTM4673Y

Quad-Output 5A Digital μModule Regulator, PMBus, 4.5V-17V In, BGA-144

4236

Effective Inventory

Image for reference only

Manufacturer Part:

LTM4673Y

Package:

BGA-144 (15 x 9 x 3.42 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTM4673Y is a quad-output step-down μModule (power module) regulator with digital power system management (DPSM) via PMBus interface from Analog Devices. Operating from 4.5V to 17V input, this device integrates four DC-DC converters with inductors, MOSFETs, and control circuitry into a compact BGA package, each channel delivering up to 5A of output current. PMBus interface enables comprehensive digital control including output voltage programming, margining, fault configuration, and telemetry of VIN, VOUT, IOUT, and temperature. With efficiency up to 92% and frequency synchronization, the LTM4673 is ideal for complex multi-rail power systems in servers, data storage, telecom, and FPGA/ASIC/DSP applications requiring precise digital power management.

Key Specifications

Parameter Value
Manufacturer Analog Devices
Part Number LTM4673Y
Product Category Digital Power Modules (μModule)
Number of Channels 4 (Quad)
Topology Synchronous Buck (Step-Down), per channel
Input Voltage Range 4.5V to 17V
Output Voltage Range 0.6V to 5.5V (per channel, programmable)
Output Current Up to 5A per channel (4 channels)
Switching Frequency 500kHz default, sync to 500kHz-1MHz
Digital Interface PMBus (I²C-compatible, up to 400kHz)
Package / Case BGA-144 (15×9×3.42mm)
Operating Temperature -40°C to +125°C

Features

  • Quad 5A step-down μModule regulator (total 20A)
  • Integrated shielded inductors, MOSFETs, and control IC
  • 4.5V to 17V input voltage range
  • 0.6V to 5.5V output per channel (PMBus programmable)
  • Digital power system management via PMBus interface
  • Telemetry: VIN, VOUT, IOUT, and temperature per channel
  • Programmable output voltage, margining, and fault thresholds
  • Frequency synchronization (500kHz to 1MHz)
  • Peak efficiency up to 92% per channel
  • Programmable soft-start and sequencing
  • Overvoltage, overcurrent, and thermal protection per channel
  • Compact BGA-144 package with LGA-compatible footprint

Applications

  • Servers and data storage equipment
  • Telecom and networking equipment
  • Industrial and medical equipment
  • Point-of-load power supplies for FPGA/ASIC/DSP
  • Multi-rail digital power systems
  • Rack-mount and blade server power
Product Introduction: LTM4673Y Product Introduction

The LTM4673Y is a quad-output step-down μModule regulator with digital power system management from Analog Devices. As part of ADI’s LTM46xx family of μModule (power module) regulators, the LTM4673 integrates the switching controllers, power MOSFETs, inductors, and support components into a single compact BGA package. What distinguishes the LTM4673 is its PMBus digital interface, enabling full digital control and monitoring of all four output rails.

Each of the four channels provides up to 5A of output current with independently programmable output voltages from 0.6V to 5.5V. The 4.5V to 17V input range covers typical 5V, 12V, and intermediate bus architectures. Synchronous rectification achieves high efficiency up to 92%, reducing thermal requirements and improving energy efficiency.

The PMBus interface is the key feature of the LTM4673, enabling digital power system management (DPSM). Through the PMBus, designers can program output voltages, set overvoltage/undervoltage/overcurrent fault thresholds, configure power-up sequencing and soft-start, and read telemetry data including input voltage, output voltage, output current, and die temperature for each channel. This enables sophisticated power management, margining for system testing, and real-time monitoring for predictive maintenance.

The LTM4673Y is supplied in a 144-ball BGA package measuring 15mm × 9mm × 3.42mm. The package includes both the controller IC and four shielded inductors, providing high power density. The device supports frequency synchronization, allowing multiple modules to be synchronized to reduce system noise. All parameters can be configured via PMBus or pin-strapped resistors for default operation without software.

Working Principle: LTM4673Y Working Principle

The LTM4673 is a quad-channel synchronous buck μModule with PMBus digital control:

1. Four Independent Buck Converters: Each of the four channels is a complete synchronous buck converter with its own controller, power MOSFETs (high-side and low-side), and integrated shielded inductor. Each channel can be independently configured for different output voltages and current limits.

2. PMBus Interface: An I²C-compatible PMBus serial interface provides digital access to all control and monitoring functions. The PMBus address is set via pin-strapping (ADDR_SEL pin), allowing multiple modules on the same bus. The interface supports standard PMBus commands for voltage setting, fault configuration, status reading, and telemetry.

3. Voltage Mode Control: Each channel uses voltage-mode control with Type III compensation optimized for the integrated inductor and typical output capacitance. The switching frequency is 500kHz default and can be synchronized to an external clock between 500kHz and 1MHz for multi-module interleaved operation.

4. Digital Telemetry: An integrated 12-bit ADC measures input voltage, each output voltage, each output current (via DCR sensing), and die temperature. These measurements are available through PMBus read commands, enabling real-time monitoring of the power system health.

5. Output Voltage Programming: Output voltages are programmed either via PMBus (VOUT_COMMAND) or through external feedback resistors for default startup values. The PMBus can override the resistor-programmed voltage during operation, enabling dynamic voltage scaling (DVS) or margining.

6. Fault Management: Each channel has programmable overvoltage (OV), undervoltage (UV), and overcurrent (OC) fault thresholds. Fault response (latch-off, retry, ignore) is also programmable via PMBus. A fault log records fault events for diagnostic purposes.

7. Sequencing and Soft-Start: Power-up and power-down sequencing can be programmed via PMBus, with each channel assigned a turn-on delay and ramp time. This enables precise power sequencing for FPGAs, ASICs, and processors that require specific power-up order. Soft-start limits inrush current during startup.

Pin Description: LTM4673Y Pin Definition and Functions
Pin Type Count Description
VIN (Power Input) Multiple Input voltage supply (4.5V to 17V). All VIN pins connected internally. Bypass with ceramic capacitors.
GND (Ground) Multiple Power and signal ground. Numerous GND balls provide low-impedance return paths.
VOUT1-4 (Outputs) Each channel Regulated output voltage for each channel. Connect output capacitors and load here. Channel 1, 2, 3, 4 each have dedicated VOUT balls.
FB1-4 (Feedback) 4 Feedback input for each channel. Connect resistor divider from VOUTx to FBx to GND for default output voltage setting. Can be overridden via PMBus.
RUN1-4 (Enable) 4 Run/enable input for each channel. Pull high to enable, low to disable. Can control individual channel power-up.
SDA (PMBus Data) 1 PMBus serial data (I²C data). Open-drain, requires external pull-up resistor.
SCL (PMBus Clock) 1 PMBus serial clock (I²C clock). Open-drain, requires external pull-up resistor.
SYNC (Sync) 1 Frequency synchronization input/output. Can input external clock or output sync signal for multi-module operation.
ADDR_SEL (Address) 1 PMBus address selection. Connect resistor to GND or VIN to set I²C slave address.
PGOOD1-4 4 Power-good open-drain outputs for each channel. Flags when respective output is in regulation.
FAULT (Fault) 1 Fault flag output. Pulled low when any fault condition occurs on any channel.

Note: Exact BGA ball layout should be referenced from the LTM4673 datasheet. This table summarizes functional groups. The BGA-144 package has a 1.0mm ball pitch.

Application Scenarios: In which products and applications is LTM4673Y used
  • Server motherboard and blade server power supplies
  • Multi-rail FPGA and ASIC core power with digital management
  • Telecom line cards and network processor power
  • Data storage and SSD array power systems
  • Industrial automation and test equipment with power monitoring
  • Any system requiring power telemetry and digital power management
Alternative Models: What chips are recommended as replacements for LTM4673Y
Manufacturer Part Number Package Notes
Analog Devices LTM4676 BGA Dual 18A with PMBus (higher current)
Analog Devices LTM4675 BGA Dual 9A with PMBus
Analog Devices LTM4644 BGA Quad 4A, no PMBus (analog only)
Texas Instruments TPS53688 QFN 8-phase digital buck controller
Texas Instruments TPSM8D6C24 QFN Dual 40A stacked power module
Infineon IR38064 QFN Digital single-phase buck regulator

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1