Opens in a new tab

M65831F

Digital Echo Processor for Karaoke, 27KB SRAM, 3V-5.5V, SOP-24

14813

Effective Inventory

Image for reference only

Manufacturer Part:

M65831F

Package:

SOP-24, 7.8 x 12.8 x 2.0 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The M65831F is a digital echo processor from Renesas Electronics, specifically designed for karaoke and audio reverberation applications. Featuring built-in 27KB SRAM (organized as 4096 words × 12 bits × 2 channels), 8-bit A/D and D/A converters, and dedicated digital signal processing logic, this chip provides high-quality echo and reverb effects with minimal external components. Operating from a single 3V to 5.5V power supply with low power consumption of 150mW typical, the M65831F supports sampling frequencies from 12kHz to 50kHz. The SOP-24 package makes it suitable for integration into karaoke equipment, audio mixers, home theater systems, musical instruments, and car audio systems.

Key Specifications

Parameter Value
Manufacturer Renesas Electronics
Part Number M65831F
Product Category Audio DSP / Echo Processors
Function Digital Echo and Reverberation Processor
Supply Voltage 3V to 5.5V (single supply)
Power Consumption 150mW typical
Built-in Memory 27KB SRAM (4096 × 12-bit × 2 ch)
A/D Converter 8-bit, built-in
D/A Converter 8-bit, built-in
Sampling Frequency 12kHz to 50kHz
Package / Case SOP-24 (24-pin shrink SOP)
Operating Temperature -20°C to +75°C

Features

  • Digital echo and reverberation effects
  • Built-in 27KB SRAM (4096-word × 12-bit × 2 channels)
  • 8-bit built-in A/D and D/A converters
  • Sampling frequency: 12kHz to 50kHz
  • Single power supply: 3V to 5.5V
  • Low power consumption: 150mW typical
  • Variable delay time and feedback level
  • Dual-channel architecture for stereo operation
  • SOP-24 surface-mount package
  • Minimal external components required
  • Compatible with NPN mic input and line-level signals

Applications

  • Karaoke machines and karaoke systems
  • Audio mixers and mixing consoles
  • Home theater systems and AV receivers
  • Musical instruments and effects pedals
  • Car audio systems
  • Professional audio and PA equipment
Product Introduction: M65831F Product Introduction

The M65831F is a digital echo processor from Renesas Electronics (formerly Mitsubishi Electric), designed specifically for adding echo and reverberation effects to audio signals. This device has been widely used in karaoke systems and audio equipment for many years, becoming a de facto standard for low-cost digital echo processing.

At the heart of the M65831F is 27KB of built-in SRAM, organized as 4096 words of 12-bit memory for each of two channels. This memory serves as the delay line for creating echo effects — the audio signal is digitized, stored in memory, and then read out after a programmable delay. Multiple delayed versions are mixed with different gains to create rich reverb effects.

The device integrates 8-bit A/D and D/A converters, eliminating the need for external converters. The sampling frequency can be set from 12kHz to 50kHz via an external clock or RC oscillator, allowing tradeoffs between audio quality and delay time. Higher sampling rates provide better audio quality but reduce the maximum delay time for a given memory size.

Echo parameters such as delay time, feedback level (regeneration), and effect level are controlled through external potentiometers or DC voltages, making the M65831F easy to integrate into analog audio systems. The SOP-24 package provides a compact surface-mount solution. With a single 3V-5.5V power supply and low 150mW power consumption, the M65831F is suitable for both mains-powered and battery-operated audio equipment.

Working Principle: M65831F Working Principle

The M65831F creates digital echo and reverb effects through the following signal chain:

1. Analog Input and A/D Conversion: The input audio signal (from a microphone or line-level source) is fed into the internal 8-bit analog-to-digital converter. The ADC samples the analog signal at the sampling frequency (set by the external clock/oscillator) and converts it to 8-bit digital samples.

2. Delay Memory: The digital samples are written into the internal SRAM delay memory. The memory is organized as a circular buffer — each new sample is written to one location while older samples are read out from a location N positions behind, where N determines the delay time. N is set by the DELAY control pin (external voltage or potentiometer).

3. Feedback Loop: A portion of the delayed signal (controlled by the FEEDBACK pin) is fed back into the delay line input, along with the original dry signal. This creates multiple decaying echo repetitions, simulating the natural reverberation of sound in a room. Higher feedback creates longer reverb decay times.

4. D/A Conversion: The delayed (wet) signal is converted back to analog by the internal 8-bit digital-to-analog converter. The output is an analog signal containing the echo/reverberation effect.

5. Mixing: In typical applications, the wet (echo) signal from the M65831F is mixed with the dry (original) signal using an external op-amp or mixer circuit. The E.LEVEL control adjusts the ratio of wet to dry signal.

6. Dual Channel Operation: The M65831F has two channels, allowing stereo echo processing. Each channel has its own delay memory (4096 × 12 bits) and D/A converter, but they share the same A/D converter and control logic. Stereo input is time-division multiplexed through the single ADC.

7. Clock and Sampling: An external clock signal (or RC oscillator circuit connected to the OSC pins) sets the sampling frequency. Higher sampling rates (up to 50kHz) provide better audio bandwidth but reduce the maximum available delay time, as the fixed-size memory fills up faster.

Pin Description: M65831F Pin Definition and Functions
Pin Name Type Description
1 VDD Power Positive power supply (3V to 5.5V). Decouple with 0.1µF ceramic capacitor to GND.
2 AGND Ground Analog ground. Connect to ground plane separately from DGND for noise isolation.
3 MICIN Input Microphone input. Connect to NPN mic preamplifier collector. Single-ended input for mono mic signal.
4 BIAS Output Mic bias output. Provides bias voltage for electret microphone. Decouple with capacitor.
5 E.LEVEL Input Effect level control. DC voltage or potentiometer controls wet/dry mix of echo effect.
6 DELAY Input Delay time control. DC voltage or potentiometer adjusts delay time by changing memory read offset.
7 FEEDBACK Input Feedback (regeneration) control. DC voltage or potentiometer sets reverb decay time / number of echoes.
8 DGND Ground Digital ground. Connect to ground plane. Separate from AGND at single point.
9 OSC1 I/O Oscillator input 1. Connect RC network or crystal for clock generation.
10 OSC2 I/O Oscillator input 2. Other side of oscillator circuit.
11 RESET Input Reset input. Active low. Pull low to reset internal state machine and memory.
12 TEST Input Test pin. For factory testing only. Tie to GND in normal operation.
13 DOUT Output Digital output. Test/diagnostic output. Can be left unconnected in application.
14-24 Various — Additional pins include second channel outputs, reference pins, and additional I/O. Refer to full datasheet for complete pinout.
Application Scenarios: In which products and applications is M65831F used
  • Karaoke machines and home karaoke systems
  • Professional audio mixers with built-in effects
  • Home theater AV receivers with reverb/echo modes
  • Guitar and vocal effects pedals
  • Car audio sound processors
  • Public address (PA) systems with reverb
Alternative Models: What chips are recommended as replacements for M65831F
Manufacturer Part Number Package Notes
Renesas M65831SP SIP Same function in SIP package
Renesas M65840FP SOP-28 Digital echo with surround sound
Renesas M65850FP QFP Multi-function DSP audio processor
Yamaha YSS205 DIP-24 Digital sound processor / karaoke
OKI MSM6585 SOP Echo canceller / voice processor
Various PT2399 DIP-16/SOP-16 Low-cost echo processor alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1