Opens in a new tab

MT8870DSR1

DTMF decoder IC, 16-digit detection, 4-bit output, 5V, SOIC-18, telecom/IVR applications

9500

Effective Inventory

Image for reference only

Manufacturer Part:

MT8870DSR1

Package:

SOIC-18 (7.5 x 11.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MT8870DSR1 is a DTMF (Dual-Tone Multi-Frequency) decoder integrated circuit from Zarlink (now part of Microchip). This device receives and decodes standard DTMF tones into 4-bit digital output, providing a complete DTMF receiver solution with built-in band-split filter, digit detection, and early steering logic. Packaged in SOIC-18, the MT8870DSR1 is widely used in telecommunication systems, interactive voice response (IVR) systems, and remote control applications using telephone lines.

Key Specifications

Manufacturer Zarlink / Microchip
Function DTMF (Dual-Tone Multi-Frequency) Decoder
Tone Detection 16 standard DTMF digits (0-9, A-D, *, #)
Frequency Bands Low: 697/770/852/941 Hz; High: 1209/1336/1477/1633 Hz
Detection Accuracy ±1.5% typical
Input Signal Range 35 mV to 1.2 Vrms
Output Format 4-bit binary (D0-D3)
Interface Parallel digital output + control signals
Power Supply 5V single supply
Supply Current 4.5 mA typical
Operating Temperature -40°C to +85°C
Package SOIC-18
Oscillator External 3.579545 MHz crystal
Guard Time Programmable via external capacitor

Features

  • Complete DTMF receiver on a single chip
  • Built-in band-split filter and digital detection
  • Detects all 16 standard DTMF digits
  • 4-bit tristate parallel digital output StD (Delayed Steering) and ESt (Early Steering) outputs
  • Internal dial-tone rejection filter
  • 3.579545 MHz crystal oscillator (standard TV color burst)
  • Single 5V power supply operation Low power consumption: 22.5 mW typical

Applications

  • Telephone answering machines with remote control
  • Interactive Voice Response (IVR) systems
  • Remote meter reading and utility monitoring
  • Telephone remote control systems
  • Paging and paging receivers
  • PBX and key telephone systems
  • Security alarm systems with DTMF control
  • Automated telephone banking systems
Product Introduction: MT8870DSR1 Product Introduction

The MT8870DSR1 is a complete DTMF (Dual-Tone Multi-Frequency) receiver integrated circuit originally developed by Zarlink Semiconductor (now part of Microchip Technology). This device provides full DTMF signal detection and decoding functionality in a single chip, eliminating the need for complex analog filtering and digital signal processing. The MT8870 integrates a band-split filter section and a digital decoder section. The filter section uses switched capacitor technology to separate the high and low tone groups, providing excellent performance in rejecting speech and other non-DTMF signals. The decoder section uses digital counting techniques to measure the frequencies of the received tones and determine which DTMF digit was dialed. The device accepts the 16 standard DTMF digit pairs (0-9, A, B, C, D, *, #) and outputs the decoded digit as a 4-bit binary code on tristate output pins. The early steering (ESt) and delayed steering (StD) outputs provide signaling for tone presence and valid digit detection, with guard time adjustable via an external capacitor. The MT8870 operates from a single 5V power supply and uses a standard 3.579545 MHz color burst crystal, making it both cost-effective and easy to implement. The DSR1 suffix indicates the SOIC-18 surface-mount package with industrial temperature range. Widely used in telecommunications equipment, IVR systems, remote control devices, and security systems, the MT8870 remains a reliable standard solution for DTMF reception.

Working Principle: MT8870DSR1 Working Principle

The MT8870DSR1 operates as a DTMF receiver through a two-stage process: filtering and digital detection. 1) Input Stage: The DTMF signal from the telephone line is applied to the IN- input after appropriate AC coupling. The input amplifier accepts signals in the range of 35 mV to 1.2 Vrms. 2) Dial-tone Filter: A high-pass filter at the input removes low-frequency dial tones (350 Hz and 440 Hz) that could interfere with detection. 3) Band-split Filter: A 6th-order switched capacitor band-split filter separates the incoming signal into low group (697-941 Hz) and high group (1209-1633 Hz) frequency bands. The filter uses switched capacitor technology with a clock derived from the 3.579545 MHz crystal, providing precise frequency response without external precision components. 4) Digit Detector: Each band (low and high) passes through a detector circuit that uses digital counting techniques to accurately measure the frequency of the tone present. The device compares the measured frequencies against the eight standard DTMF frequencies (four low, four high) to determine which row and column of the DTMF keypad is being pressed. 5) Steering Logic: The steering logic validates that both a low group and a high group tone are present simultaneously and have been present for the minimum guard time. The ESt (Early Steering) output goes high when valid dual tones are first detected, while StD (Steered, Delayed) goes high after the guard time has elapsed, indicating a valid digit has been latched. 6) Output Latch: When a valid digit is confirmed, the 4-bit binary code corresponding to the detected DTMF digit is latched onto the output pins (D0-D3). The outputs are tristate, controlled by the TOE (Three-state Output Enable) pin. The MT8870 incorporates sophisticated tone validation algorithms to reject speech, music, and other signals that might falsely trigger DTMF detection.

Pin Description: MT8870DSR1 Pin Definition and Functions
Pin Name Type Function
1 IN+ Input Non-inverting input of input op-amp
2 IN- Input Inverting input of input op-amp
3 GS Output Gain select (op-amp output)
4 VRef Output Voltage reference output (VDD/2)
5 INH Input Inhibit input (active high = power down)
6 PD Input Power-down input (active high)
7 OSC1 Input Crystal oscillator input
8 OSC2 Output Crystal oscillator output
9 VSS Ground Ground
10 TOE Input Three-state output enable (active low)
11-14 D0-D3 Output 4-bit data output (tristate)
15 ESt Output Early steering output
16 St/GT I/O Steering input / Guard time output
17 StD Output Delayed steering output
18 VDD Power Positive supply (5V)
Application Scenarios: In which products and applications is MT8870DSR1 used
  • Interactive Voice Response (IVR) and voicemail systems
  • Remote telephone control systems for home automation
  • Security alarm systems with DTMF remote arming/disarming
  • Utility meter reading via telephone line
  • PBX and key telephone system DTMF receivers
  • Paging system decoders
  • Automated phone banking and payment systems
  • Radio repeater control and remote base station control
Alternative Models: What chips are recommended as replacements for MT8870DSR1
Manufacturer Part Number Package Notes
Microchip/Zarlink MT8870DE DIP-18 Through-hole DIP version
MITEL/Zarlink MT8880 SOIC-20 DTMF transceiver (TX+RX)
AMS CMX885 TSSOP Multi-standard signal processor
Sipex/Exar XR2211 DIP-14 FSK/DTMF demodulator
Holtek HT9170 DIP-18/SOP-18 DTMF receiver alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1