Opens in a new tab

NAE12S17-A

17W isolated DC-DC converter, 12V input, 15V output, 1500VDC isolation, DIP package, industrial

2400

Effective Inventory

Image for reference only

Manufacturer Part:

NAE12S17-A

Package:

DIP Module (50.8 x 25.4 x 10.2 mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NAE12S17-A is a high-performance isolated DC-DC converter module from Murata Power Solutions. Designed for industrial and telecom applications, this 12V input, 15V output isolated converter provides 17 watts of output power with high efficiency and tight regulation. The module features a compact DIP package with through-hole mounting, 1500VDC isolation, and wide operating temperature range, making it suitable for demanding industrial environments.

Key Specifications

Manufacturer Murata Power Solutions
Type Isolated DC-DC Converter Module
Input Voltage (Nominal) 12 VDC
Input Voltage Range 9 – 18 VDC (±50% of nominal)
Output Voltage 15 VDC
Output Power 17 W
Output Current 1.13 A max
Isolation Voltage 1500 VDC
Efficiency Up to 86% typical
Switching Frequency ~300 kHz typical
Line Regulation ±0.5% max
Load Regulation ±1.0% max
Ripple & Noise 75 mV p-p max
Operating Temperature -40°C to +85°C (with derating)
Package DIP Module (DIP-24 footprint)
Mounting Type Through-Hole
Protection Over-current, short-circuit, over-voltage

Features

  • 17W isolated DC-DC converter
  • 12V nominal input (9-18V range)
  • 15V regulated single output
  • High efficiency: up to 86%
  • 1500VDC galvanic isolation
  • Industry-standard DIP package pinout
  • Continuous short-circuit protection
  • Over-voltage protection
  • Low ripple and noise
  • Fixed switching frequency
  • UL60950 safety approvals
  • Through-hole mounting
  • Industrial operating temperature range
  • RoHS compliant
  • Long MTBF: >1 million hours

Applications

  • Industrial control and automation systems
  • Telecommunications equipment
  • Data communications and networking
  • Medical equipment (non-patient contact)
  • Test and measurement instruments
  • Distributed power architectures
  • Power supply for isolated interface circuits
  • Battery-powered equipment
Product Introduction: NAE12S17-A Product Introduction

The NAE12S17-A is a 17-watt isolated DC-DC converter from Murata Power Solutions’ NAE series. This module provides a regulated 15V DC output from a 12V DC input with 1500 volts of galvanic isolation between input and output. The NAE series is designed for industrial and telecom applications requiring reliable, compact isolated power conversion. With its industry-standard DIP package footprint and through-hole mounting, the NAE12S17-A can be easily integrated into a wide variety of PCB designs. The module features a wide input voltage range of 9V to 18V (±50% of the 12V nominal), accommodating typical 12V bus variations and battery operation. The fully regulated output maintains tight line and load regulation of ±0.5% and ±1.0% respectively, ensuring stable power for sensitive analog and digital circuits. The NAE12S17-A incorporates comprehensive protection features including continuous short-circuit protection with auto-recovery, over-voltage protection, and thermal shutdown. The 1500VDC isolation rating meets safety standards for general-purpose industrial applications. The module operates at a fixed switching frequency of approximately 300 kHz, allowing the use of small external filter capacitors if additional ripple filtering is required. With an MTBF (Mean Time Between Failures) exceeding 1 million hours and operation across the full -40°C to +85°C temperature range (with appropriate derating at high temperatures), the NAE12S17-A provides the reliability required for industrial and telecommunications infrastructure applications.

Working Principle: NAE12S17-A Working Principle

The NAE12S17-A operates as an isolated flyback or forward topology DC-DC converter, using a high-frequency transformer to provide galvanic isolation between the input and output. The basic operation follows these steps: 1) Input Filtering: The 12V DC input passes through input filtering to reduce conducted noise and provide energy storage for transient loads. 2) Inverter Stage: A switching MOSFET chops the DC input voltage at high frequency (approximately 300 kHz), creating an AC square wave that drives the primary winding of the isolation transformer. 3) Isolation Transformer: The transformer provides galvanic isolation between the input and output sides while stepping the voltage up (or down) as needed. The turns ratio is designed to produce the desired 15V output after rectification. 4) Rectification: The AC voltage on the secondary side is rectified back to DC using Schottky diodes for low forward voltage drop and high efficiency. 5) Output Filtering: An LC filter smooths the rectified DC, reducing ripple to less than 75mV peak-to-peak. 6) Regulation: A feedback loop senses the output voltage and adjusts the switching duty cycle to maintain a constant 15V output despite changes in input voltage and load current. The feedback signal crosses the isolation barrier through an optocoupler or auxiliary winding. 7) Protection Circuits: If the output is short-circuited, the converter enters a current-limiting or hiccup mode to protect itself. Over-voltage and thermal shutdown circuits provide additional protection against fault conditions. The efficiency of up to 86% means that only about 14% of the output power is dissipated as heat, reducing thermal management requirements and improving overall system efficiency.

Pin Description: NAE12S17-A Pin Definition and Functions
Pin Name Type Function
1 -Vin Input Input negative (ground)
5 +Vin Input Input positive (12V nominal)
20 Trim Input Output voltage trim (optional)
21 -Vout Output Output negative (isolated ground)
24 +Vout Output Output positive (15V)
2-4,6-19 NC/Case – No connection / case pins
22-23 NC – No connection
Application Scenarios: In which products and applications is NAE12S17-A used
  • Industrial PLC and distributed control system power supplies
  • Telecommunications equipment isolated power rails
  • Data networking and switchgear isolated interfaces
  • Test and measurement instrument power supplies
  • Medical devices requiring isolation (non-patient contact)
  • 4-20mA current loop power supplies
  • RS-485/RS-232 isolated interface power
  • Battery-powered industrial sensor networks
Alternative Models: What chips are recommended as replacements for NAE12S17-A
Manufacturer Part Number Power Notes
Murata NAE12S5-A 17W 5V output variant
Murata NAE12S12-A 17W 12V output variant
Murata NAE12S24-A 17W 24V output variant
Mean Well SD-15A-15 15W Enclosed DC-DC alternative
Recom R-78E12-15 15W Non-isolated boost alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1