Opens in a new tab

NC7SZ126M5X

Single 3-state buffer, non-inverting, 1.65-5.5V, 3ns delay, ±24mA drive, SOT-23-5

25000

Effective Inventory

Image for reference only

Manufacturer Part:

NC7SZ126M5X

Package:

SOT-23-5 / SC-74A (2.9 x 1.6 x 1.0 mm, 0.95mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NC7SZ126M5X is a single 3-state buffer/line driver with non-inverting output and active high enable from ON Semiconductor. Part of the TinyLogic UHS (Ultra High Speed) series, this device is fabricated with advanced CMOS technology for high-speed operation with low power consumption. Packaged in the ultra-compact SOT-23-5 package, the NC7SZ126M5X is ideal for signal buffering, line driving, and bus interface applications where board space is at a premium.

Key Specifications

Manufacturer ON Semiconductor
Function Single Buffer with 3-State Output
Logic Family TinyLogic UHS (Ultra High Speed)
Number of Bits 1 (single channel)
Output Type 3-state (tri-state), non-inverting
Enable Polarity Active High (OE)
Supply Voltage 1.65V to 5.5V
Propagation Delay 3.0 ns typical (at 3.3V)
Output Drive Current ±24 mA
Input Capacitance 3 pF typical
Quiescent Current 0.1 µA typical
Operating Temperature -40°C to +85°C
Package SOT-23-5 (TSOP-5)
Technology Advanced CMOS
Schmitt Trigger Input No (standard CMOS input)

Features

  • Ultra high speed: tpd = 3.0 ns typical (3.3V Vcc)
  • Wide operating voltage: 1.65V to 5.5V
  • Single buffer with 3-state output
  • Non-inverting logic
  • Active high output enable
  • High output drive: ±24 mA Over-voltage tolerant inputs Low static power consumption TinyLogic UHS series SOT-23-5 (SC-74A) package 5V tolerant I/O when operating at 3.3V Lead-free and RoHS compliant Available in tape and reel packaging

    Applications

    • Bus interfacing and signal buffering
    • Clock and data signal line driving
    • Memory address/data bus drivers
    • Portable electronics and battery-powered devices
    • High-speed digital systems
    • Level translation between voltage domains
    • Load isolation and fanout expansion
    • Communication and networking equipment
Product Introduction: NC7SZ126M5X Product Introduction

The NC7SZ126M5X is a single buffer with 3-state output from ON Semiconductor’s TinyLogic UHS (Ultra High Speed) family. This device provides buffering and line driving capability in an ultra-compact SOT-23-5 package, making it ideal for space-constrained applications. Fabricated using advanced sub-micron CMOS technology, the NC7SZ126 achieves ultra-high speed operation with propagation delays as low as 3.0 ns at 3.3V supply voltage, while maintaining very low quiescent power consumption. The ‘NC7’ prefix designates the Fairchild/ON Semiconductor TinyLogic series, ‘SZ’ indicates single-gate UHS technology, ‘126’ is the function code (single 3-state buffer with active high enable), ‘M’ specifies SOT-23-5 package, and ‘5X’ indicates the specific package variant and shipping format. The device features a non-inverting buffer with a 3-state output controlled by an active-high output enable (OE) pin. When OE is high, the output follows the input; when OE is low, the output is placed in a high-impedance state, making it suitable for bus-oriented applications where multiple devices share a common signal line. The wide supply voltage range of 1.65V to 5.5V allows operation from a variety of power supply rails, including 1.8V, 2.5V, 3.3V, and 5V systems. The high output drive capability of ±24mA means the device can drive relatively heavy loads, making it useful as a line driver for signals traveling across PCB traces or between boards.

Working Principle: NC7SZ126M5X Working Principle

The NC7SZ126M5X operates as a CMOS buffer with 3-state output capability: 1) Input Stage: The input signal (A) is received by a CMOS input buffer. The input is compatible with both TTL and CMOS logic levels across the operating voltage range. When operated at lower voltages (e.g., 3.3V), the inputs are 5V tolerant, allowing the device to serve as a level translator from higher voltage logic. 2) Logic Stage: The signal passes through an internal non-inverting buffer stage. Despite being a single-gate device, the internal design may include multiple inverter stages to achieve the desired speed and drive characteristics while maintaining the non-inverting function. 3) Output Enable Control: The output enable (OE) signal controls a set of transmission gates at the output. When OE is high, the output drive transistors are enabled, and the signal is passed to the output pin (Y). When OE is low, both the pull-up PMOS and pull-down NMOS output transistors are turned off, placing the output in a high-impedance (high-Z) state. 4) Output Stage: The output is a push-pull CMOS output stage with both PMOS (pull-up) and NMOS (pull-down) transistors, capable of sourcing and sinking up to 24mA. This high drive capability allows the device to drive capacitive loads with fast edge rates. 5) Power and Ground: The device operates from a single VCC supply (1.65V to 5.5V). The speed and drive capability scale with supply voltage – higher voltages provide faster switching and higher output current. The 3-state functionality makes this device particularly useful in bus architectures where multiple sources need to drive a common signal line. Only the device with its output enabled drives the line; all others are in high-impedance state, preventing bus contention.

Pin Description: NC7SZ126M5X Pin Definition and Functions
Pin Name Type Function
1 A Input Data input (non-inverting)
2 GND Ground Ground (0V)
3 Y Output 3-state data output
4 OE Input Output Enable (active high)
5 VCC Power Positive supply (1.65-5.5V)
Application Scenarios: In which products and applications is NC7SZ126M5X used
  • Address and data bus buffering in microprocessor systems
  • Clock signal distribution and line driving
  • Level translation between different voltage domains
  • Load isolation and fanout expansion in digital systems
  • Portable and battery-powered electronics (low power)
  • High-speed data communication interfaces
  • Memory interface signal conditioning
  • Networking and telecommunications equipment
Alternative Models: What chips are recommended as replacements for NC7SZ126M5X
Manufacturer Part Number Package Notes
ON Semiconductor NC7SZ125M5X SOT-23-5 Active low enable variant
TI SN74LVC1G126 SOT-23-5 Single 3-state buffer alternative
NXP 74LVC1G126GW SOT-353 Single buffer with 3-state
ON Semiconductor NC7SZ07M5X SOT-23-5 Open drain buffer alternative
Microchip MCP130T-300I SOT-23 Supervisor IC alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1