Opens in a new tab

NCF3320EHN

NFC Type 2 Tag IC, ISO 14443A, 1.5KB EEPROM, I2C+SPI host interface, energy harvesting, QFN-32

4200

Effective Inventory

Image for reference only

Manufacturer Part:

NCF3320EHN

Package:

HVQFN-32 (5.0 x 5.0 x 0.85 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCF3320EHN is an NFC Forum Type 2 Tag IC with I²C and SPI interfaces from NXP Semiconductors. This highly integrated NFC tag controller supports ISO/IEC 14443 Type A RF interface and provides 1.5KB of user EEPROM memory. With dual host interfaces (I²C and SPI), the NCF3320 can be used in dynamic NFC tag applications where data is exchanged between an RF reader and a host microcontroller. Packaged in HVQFN-32, it’s ideal for IoT, wearable, and smart label applications.

Key Specifications

Manufacturer NXP Semiconductors
Type NFC Forum Type 2 Tag IC
RF Standard ISO/IEC 14443 Type A (13.56 MHz)
NFC Forum Compliance Type 2 Tag
User Memory 1.5 KB EEPROM (48 sectors x 32 bytes)
EEPROM Endurance 100,000 write cycles
Data Retention 10 years (typical)
Host Interfaces I²C (up to 3.4 MHz) + SPI (up to 10 MHz)
RF Data Rate 106 kbps
Operating Voltage 1.6V to 3.6V (host side)
Energy Harvesting Yes (RF energy can power device)
Field Detect RF field detection output
Operating Temperature -40°C to +105°C
Package HVQFN-32 (5x5mm)
Security Password protection, originality signature

Features

  • NFC Forum Type 2 Tag compliant
  • ISO/IEC 14443 Type A at 13.56 MHz
  • 1.5KB user EEPROM (48×32 bytes)
  • Dual host interface: I²C and SPI
  • Energy harvesting from RF field
  • RF field detection (FD pin)
  • Password-protected access to memory
  • Originality signature based on AES
  • Fast transfer mode (FTM) for high-speed data exchange
  • Configurable interrupt output
  • Low power consumption
  • Wide supply voltage range: 1.6V to 3.6V
  • HVQFN-32 5x5mm package Lead-free and RoHS compliant Industrial temperature range: -40°C to +105°C

    Applications

    • Internet of Things (IoT) smart tags and sensors
    • Wearable devices and smart accessories
    • Industrial and consumer NFC pairing
    • Smart home and building automation
    • Asset tracking and inventory management
    • Medical device authentication and data logging
    • Automotive NFC applications
    • Bluetooth/Wi-Fi easy pairing with NFC
Product Introduction: NCF3320EHN Product Introduction

The NCF3320EHN is a highly integrated NFC Forum Type 2 Tag IC with dual host interfaces (I²C and SPI) from NXP Semiconductors. This device bridges the gap between NFC RF communication and digital host systems, enabling dynamic NFC tag applications where data can be accessed both wirelessly via NFC and locally through a host microcontroller. Building on NXP’s MIFARE Ultralight and NTAG product line heritage, the NCF3320 adds full host interface capability, making it suitable for a wide range of connected applications. The device features 1.5KB of user EEPROM memory organized into 48 sectors of 32 bytes each. The memory can be accessed both through the NFC RF interface (ISO/IEC 14443 Type A at 13.56 MHz) and through the host interfaces (I²C up to 3.4 MHz or SPI up to 10 MHz). Arbitration logic handles concurrent access attempts, ensuring data integrity. A key feature is energy harvesting, where the device can derive operating power from the NFC RF field, enabling operation even when the host system is powered off. This allows data to be read or written to the tag without needing the host to be active. The RF field detect (FD) pin can be used to wake up the host system when an NFC reader is present. Security features include password-protected memory access and an originality signature based on AES, which can be used to authenticate the device and prevent counterfeiting. The NCF3320 also supports Fast Transfer Mode (FTM) for high-speed data exchange between the RF and host interfaces.

Working Principle: NCF3320EHN Working Principle

The NCF3320EHN operates as a dual-interface NFC tag controller, bridging RF NFC communication with digital host interfaces. Its operation involves several key functional blocks: 1) RF Analog Front-End (AFE): The NFC antenna connects to the RF pins, where an internal matching network and rectifier circuit extracts both the RF data signal and operating power from the 13.56 MHz NFC field. The AFE demodulates the incoming RF signal and modulates the response back to the reader. Energy harvesting circuitry can provide power to the device from the RF field when host power is unavailable. 2) Digital Protocol Engine: The digital logic implements the ISO/IEC 14443 Type A protocol stack and NFC Forum Type 2 Tag command set. It handles anti-collision, authentication, and memory access commands from the NFC reader. 3) EEPROM Memory Array: The 1.5KB of EEPROM stores the tag data. The memory is organized in pages/sectors with configurable access permissions. Password protection can restrict read/write access to certain memory areas. 4) Host Interface (I²C/SPI): The host microcontroller communicates with the NCF3320 through either I²C or SPI interface. The host can read and write EEPROM memory, configure device settings, and receive interrupt notifications. 5) Arbitration Logic: When both the RF interface and host interface attempt to access memory simultaneously, the arbitration logic manages access to prevent data corruption. 6) Power Management: The device can be powered from the host supply (VCC) or from harvested RF energy. An internal power management unit automatically selects the appropriate power source and manages sleep/wake modes. 7) Field Detect and Interrupt: The FD (Field Detect) pin signals when an NFC RF field is present. The INT pin can be programmed to generate interrupts for various events, enabling event-driven host operation. 8) Security Engine: The AES-based security engine generates and verifies originality signatures, enabling host-side verification of the tag’s authenticity to prevent counterfeiting.

Pin Description: NCF3320EHN Pin Definition and Functions
Pin Group Pins Type Function
Power VCC, VSS Power/Ground Supply (1.6-3.6V) and ground
RF Interface RF1, RF2 RF Antenna connection (13.56MHz)
I²C Interface SCL, SDA I/O I2C clock and data (host interface)
SPI Interface SCK, MOSI, MISO, SS I/O SPI clock, data in/out, chip select
Field Detect FD Output RF field detection output
Interrupt IRQ Output Interrupt output (configurable)
Reset RST_N Input Reset (active low)
Interface Select IFSEL Input Host interface selection (I2C/SPI)
GPIO GPIO0, GPIO1 I/O General-purpose I/O pins
EP Exposed Pad Ground Exposed thermal pad (connect to VSS)
Application Scenarios: In which products and applications is NCF3320EHN used
  • IoT smart sensor nodes with NFC configuration and data readout
  • Wearable devices for NFC pairing and data exchange
  • Bluetooth/Wi-Fi easy pairing (just tap to connect)
  • Industrial asset tracking with dynamic data logging
  • Medical device authentication and patient data exchange
  • Smart home devices with NFC commissioning
  • Automotive NFC applications (key fobs, infotainment pairing)
  • Authentication and anti-counterfeiting for consumer products
Alternative Models: What chips are recommended as replacements for NCF3320EHN
Manufacturer Part Number Package Notes
NXP NT3H2111 XQFN-8 NTAG I2C 1K, smaller package
NXP NT3H2211 XQFN-8 NTAG I2C 2K variant
STMicroelectronics ST25DV04K SO-8/TSSOP Dynamic NFC/RFID tag with I2C
TI RF430FRL152H VQFN-48 NFC transponder with MCU
Ams AS3955 QFN-32 NFC forum type 2 tag with SPI

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1