Opens in a new tab

NJM2068M

Dual JFET-input op-amp, low noise, 8MHz GBW, 5V/µs slew, ±4 to ±18V, SOP-8, audio

15000

Effective Inventory

Image for reference only

Manufacturer Part:

NJM2068M

Package:

DMP-8 / SOP-8 (4.9 x 3.9 x 1.6 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NJM2068M is a high-performance dual operational amplifier from JRC (New Japan Radio), now part of Nisshinbo Micro Devices. This low-noise dual op-amp features JFET inputs for very low input bias currents, making it ideal for high-impedance signal conditioning and audio preamplifier applications. With 8MHz gain-bandwidth product and 5V/µs slew rate, the NJM2068M outperforms general-purpose op-amps like the 4558 while maintaining a similar pinout. Packaged in DMP-8 (SOP-8).

Key Specifications

Manufacturer NJR (New Japan Radio) / Nisshinbo
Type Dual JFET-Input Operational Amplifier
Number of Amplifiers 2 (dual)
Input Type JFET differential input
Input Bias Current 50 pA typical (very low)
Input Offset Voltage 2 mV typical
Gain-Bandwidth Product 8 MHz
Slew Rate 5 V/µs
Supply Voltage (Dual) ±4V to ±18V
Supply Voltage (Single) 8V to 36V
Supply Current 5 mA typical (per amplifier)
Output Voltage Swing ±13V typical (±15V supply, 2kΩ load)
Open Loop Gain 100 dB typical
Common-Mode Rejection Ratio 90 dB typical
Operating Temperature -40°C to +85°C
Package DMP-8 / SOP-8 (surface mount)

Features

  • Dual JFET-input op-amp
  • Very low input bias current: 50 pA typical
  • Low noise: 10 nV/√Hz typical
  • Wide gain-bandwidth product: 8 MHz
  • Fast slew rate: 5 V/µs
  • Wide supply voltage range: ±4V to ±18V
  • Standard dual op-amp pinout (pin compatible with 4558)
  • High input impedance
  • Low total harmonic distortion
  • Excellent for audio preamplifiers
  • Surface-mount DMP-8 (SOP-8) package
  • Lead-free and RoHS compliant

Applications

  • Audio preamplifiers and headphone amplifiers
  • Active filters and equalizers
  • High-impedance sensor signal conditioning
  • Instrumentation amplifiers
  • Servo error amplifiers
  • Low-noise analog signal processing
  • Photodiode and phototransistor amplifiers
  • Professional audio and studio equipment
Product Introduction: NJM2068M Product Introduction

The NJM2068M is a high-performance dual operational amplifier from NJR (New Japan Radio, now Nisshinbo Micro Devices). Featuring JFET input stages, this dual op-amp offers very low input bias currents (in the picoampere range) and high input impedance, making it particularly suitable for high-impedance signal source applications such as photodiode amplifiers, piezoelectric sensors, and other circuits where input loading must be minimized. Compared to general-purpose dual op-amps like the 4558, the NJM2068 provides superior performance with a wider gain-bandwidth product (8 MHz vs 2-3 MHz), higher slew rate (5 V/µs vs 1-2 V/µs), and lower noise, while maintaining a compatible pinout for drop-in upgrades. The ‘M’ suffix indicates the DMP-8 (SOP-8) surface-mount package. The device operates from dual supplies of ±4V to ±18V or single supplies of 8V to 36V, providing flexibility for a wide range of applications. With low total harmonic distortion and excellent noise performance, the NJM2068M is particularly well-suited for audio applications including preamplifiers, headphone amplifiers, active equalizers, and tone control circuits. Its JFET inputs also make it ideal for high-impedance sensor interfaces and integrator circuits where low bias current is critical for accuracy.

Working Principle: NJM2068M Working Principle

The NJM2068M is a dual JFET-input operational amplifier that operates on classic op-amp principles with JFET differential input stages: 1) Input Stage: Each amplifier channel uses a pair of JFET (Junction Field-Effect Transistor) devices as the differential input pair. JFETs provide extremely high input impedance and very low input bias current (picoampere range), making these op-amps ideal for high-impedance signal sources. The differential pair converts the voltage difference between the two inputs into a current difference. 2) Gain Stage: The signal from the input stage is amplified by a high-gain intermediate stage, typically using a common-emitter BJT amplifier with an active load. This stage provides most of the op-amp’s open-loop gain. 3) Output Stage: A push-pull class AB output stage provides low output impedance and can drive moderate load impedances. The output stage is designed to provide wide output voltage swing, typically within a couple of volts of the supply rails. 4) Frequency Compensation: Internal frequency compensation ensures stability in closed-loop operation. The 8MHz gain-bandwidth product means that as closed-loop gain increases, bandwidth decreases proportionally (GBW = gain × bandwidth = constant). 5) Bias Circuitry: Internal bias circuits provide stable reference currents for all stages, ensuring consistent performance across supply voltage and temperature variations. 6) Operating Modes: As a voltage-feedback op-amp, the NJM2068 can be configured in various standard op-amp circuits: inverting amplifier, non-inverting amplifier, voltage follower, integrator, differentiator, active filter, summing amplifier, and comparator (though not optimized for that use). The JFET input means that input bias current is extremely low and is not significantly affected by common-mode voltage, which is beneficial for high-impedance circuits like integrators and charge amplifiers.

Pin Description: NJM2068M Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Amplifier A output
2 IN- A Input Amplifier A inverting input
3 IN+ A Input Amplifier A non-inverting input
4 V- Power Negative supply voltage (GND for single supply)
5 IN+ B Input Amplifier B non-inverting input
6 IN- B Input Amplifier B inverting input
7 OUT B Output Amplifier B output
8 V+ Power Positive supply voltage
Application Scenarios: In which products and applications is NJM2068M used
  • Audio preamplifiers and phono stages (MM/MC cartridges)
  • Active filters, equalizers, and tone control circuits
  • High-impedance sensor signal conditioning (piezo, photodiode)
  • Instrumentation amplifiers and precision analog circuits
  • Servo error amplifiers and control loops
  • Headphone amplifiers and line drivers
  • Low-noise analog front-ends for measurement
  • Professional audio mixing consoles and studio equipment
Alternative Models: What chips are recommended as replacements for NJM2068M
Manufacturer Part Number Package Notes
JRC/NJR NJM4580 DMP-8 Dual audio op-amp (lower performance)
JRC/NJR NJM5532 DMP-8 Low-noise dual audio op-amp
TI TL072 SOIC-8 JFET-input dual op-amp classic
Analog Devices AD822 SOIC-8 JFET dual op-amp
ON Semiconductor MC33172 SOIC-8 Low-power dual op-amp

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1