Opens in a new tab

OC5A2B00

High-voltage buck LED driver, 6-60V input, constant current up to 3A, PWM+analog dimming, ESOP-8

6500

Effective Inventory

Image for reference only

Manufacturer Part:

OC5A2B00

Package:

ESOP-8 (4.9 x 3.9 x 0.8 mm, exposed thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OC5A2B00 is a high-voltage high-power LED driver IC from OCX Semiconductor (欧创芯). This step-down (buck) LED constant-current driver is designed for high-power LED lighting applications, featuring a wide input voltage range up to 60V and high output current capability. With integrated power MOSFET and support for both PWM and analog dimming, the OC5A2B00 is well-suited for automotive lighting, industrial LED drivers, and high-bay lighting systems.

Key Specifications

Manufacturer OCX Semiconductor (欧创芯)
Type Step-Down LED Constant-Current Driver
Input Voltage Range 6V to 60V
Output Current Up to 3 A (depending on package/cooling)
Output Voltage Adjustable (depends on LED string)
Switching Frequency Programmable, ~300kHz typical
Integrated MOSFET High-voltage power MOSFET
Efficiency Up to 95% typical
Dimming Support PWM dimming + analog dimming
Current Accuracy ±5% typical
CS Reference Voltage ~100mV (low-side current sense)
Operating Temperature -40°C to +125°C
Package SOP-8 / ESOP-8
Protection OCP, OVP, TSD, UVLO

Features

  • Wide input voltage range: 6V to 60V
  • High output current capability
  • Integrated high-voltage power MOSFET
  • Constant current LED drive
  • High efficiency: up to 95%
  • Supports PWM dimming (wide dimming range)
  • Supports analog dimming via DIM pin
  • Low-side current sensing for accurate regulation Internal soft-start for LED protection Over-current and over-voltage protection Thermal shutdown protection Undervoltage lockout (UVLO) Compact SOP-8 or ESOP-8 package Minimal external components required RoHS compliant and lead-free

    Applications

    • Automotive LED headlight and daytime running lights
    • High-bay and low-bay industrial LED lighting
    • Street lighting and outdoor LED fixtures
    • LED driver for architectural and decorative lighting
    • Automotive interior lighting
    • Constant current LED power supplies
    • Stage and studio LED lighting
    • Horticultural LED grow lights
Product Introduction: OC5A2B00 Product Introduction

The OC5A2B00 is a high-voltage step-down constant-current LED driver IC from OCX Semiconductor (欧创芯半导体), designed specifically for high-power LED lighting applications. Operating from a wide 6V to 60V input voltage range, this device integrates a high-voltage power MOSFET and operates as a buck topology constant-current regulator, eliminating the need for external switching transistors and reducing overall solution size and cost. The OC5A2B00 provides accurate constant-current regulation for LED strings, ensuring consistent brightness and long LED lifespan. The output current is programmed via an external current sense resistor, with a low sense voltage to minimize power loss and improve efficiency. The device supports both PWM dimming (via the DIM pin) and analog dimming, providing flexibility for different lighting control requirements. PWM dimming allows for very wide dimming ranges with no color shift, while analog dimming offers smooth, flicker-free brightness control. With efficiency levels up to 95%, the OC5A2B00 minimizes heat generation and reduces thermal management requirements. Comprehensive protection features include over-current protection, output short-circuit protection, over-voltage protection, and thermal shutdown, ensuring reliable operation under fault conditions. The compact ESOP-8 package with exposed thermal pad provides excellent thermal performance for high-power operation.

Working Principle: OC5A2B00 Working Principle

The OC5A2B00 operates as a buck (step-down) constant-current LED driver using a peak current-mode control approach: 1) Power Stage: The integrated high-side power MOSFET switches the input voltage across the LED load and inductor. A low-side Schottky diode (external, for non-synchronous versions) or low-side MOSFET provides the freewheeling path when the high-side switch is off. 2) Current Regulation: The LED current is regulated by sensing the current through a low-side sense resistor (RS) in series with the LED string. The CS pin monitors the voltage across this resistor. The device operates in continuous conduction mode with a fixed switching frequency. Each cycle, the high-side switch turns on at the beginning of the cycle, causing the inductor and LED current to ramp up. When the current reaches the programmed peak level, the switch turns off and the current flows through the freewheeling path, ramping down until the next cycle begins. 3) Dimming Control: – PWM Dimming: When a PWM signal is applied to the DIM pin, the LED current is switched on and off at the PWM frequency. The brightness is proportional to the PWM duty cycle. This provides very accurate dimming with no color shift. – Analog Dimming: Adjusting the DC voltage on the DIM pin changes the current reference level, allowing continuous brightness adjustment. 4) Soft-Start: At power-up, an internal soft-start circuit gradually increases the LED current to prevent inrush current and protect the LEDs from current overshoot. 5) Protection Mechanisms: – Over-Current Protection (OCP): If the current sense voltage exceeds the OCP threshold, the switch cycle is terminated immediately. – Over-Voltage Protection (OVP): If the output voltage exceeds the OVP threshold (e.g., LED open circuit), the device shuts down. – Thermal Shutdown (TSD): When the junction temperature exceeds the safe limit, the device stops switching to prevent damage. It auto-restarts after cooling. – UVLO: Ensures proper startup only when the input voltage is above the minimum threshold.

Pin Description: OC5A2B00 Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input voltage supply (6-60V)
2 EN/DIM Input Enable and dimming control pin
3 ROVP Input Output over-voltage protection setting
4 GND Ground Ground
5 CS Input Current sense input (sense resistor)
6 SW Output Switch node (connected to inductor)
7 SW Output Switch node (paralleled)
8 VCC Power Internal regulator bypass capacitor
Pad EP Ground Exposed thermal pad
Application Scenarios: In which products and applications is OC5A2B00 used
  • Automotive LED headlights and daytime running lights (DRL)
  • High-bay and low-bay industrial LED warehouse lighting
  • Outdoor street lighting and area lighting
  • Architectural and decorative LED lighting systems
  • Automotive interior ambient lighting
  • Constant-current LED power supply modules
  • Stage lighting and studio LED fixtures
  • LED grow lights for horticulture
Alternative Models: What chips are recommended as replacements for OC5A2B00
Manufacturer Part Number Package Notes
OCX OC5022B SOP-8 2.5A LED driver buck
OCX OC5021B SOP-8 5A external MOS LED driver
TI LM3409 SOIC-8 PFET buck LED driver
ON Semiconductor NCP3065 DIP-8 1.5A LED driver
XLSEMI XL4015 TO-263 5A buck regulator for LED

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1