Opens in a new tab

OC5SC25

10MHz OCXO, 5V, square wave output, ±0.01ppm stability, SC-25 package, industrial temp

1200

Effective Inventory

Image for reference only

Manufacturer Part:

OC5SC25

Package:

SC-25 (25.0 x 25.0 x 13.0 mm, hermetically sealed)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OC5SC25 is a high-precision Oven-Controlled Crystal Oscillator (OCXO) from CTI (Crystal Technology Inc.). Operating at 10 MHz with a 5V supply, this OCXO features a square-wave output and comes in the compact SC-25 (25x25mm) package. With exceptional frequency stability of ±0.1 ppm over temperature and ±0.01 ppm at room temperature, the OC5SC25 is ideal for precision timing applications including wireless base stations, test equipment, and synchronization systems.

Key Specifications

Manufacturer CTI (Crystal Technology Inc.)
Type Oven-Controlled Crystal Oscillator (OCXO)
Frequency 10 MHz (standard)
Supply Voltage 5 VDC
Output Type Square Wave (CMOS/TTL compatible)
Output Logic Level 0V Low / 5V High (CMOS/TTL)
Frequency Stability (25°C) ±0.01 ppm (typical)
Frequency Stability (Temp Range) ±0.1 ppm (over operating temp)
Operating Temperature -40°C to +85°C
Warm-up Time 3-5 minutes (to ±0.2 ppm)
Supply Current (Steady State) ~120 mA typical
Supply Current (Warm-up) ~300 mA peak
Rise Time 10 ns typical
Fall Time 12 ns typical
Phase Noise (10kHz offset) -150 dBc/Hz typical
Package SC-25 (25 x 25 x 13 mm)
Frequency Adjustment Yes (via VCXO control pin)
Aging ±0.1 ppm / year (typical)

Features

  • Ultra-high frequency stability: ±0.01 ppm @ 25°C
  • Low aging rate: ±0.1 ppm per year
  • Square wave output, CMOS/TTL compatible
  • 5V single supply operation
  • SC-cut crystal for best temperature stability
  • Fast warm-up: 3-5 minutes
  • Wide operating temperature: -40°C to +85°C
  • Low phase noise performance
  • Frequency tuning capability (voltage control)
  • Hermetically sealed SC-25 package
  • High reliability and long-term stability
  • RoHS compliant
  • Industrial grade

Applications

  • Wireless base station and telecom infrastructure
  • Precision test and measurement equipment
  • GPS and navigation systems
  • Network synchronization (IEEE 1588 PTP, SyncE)
  • Spectrum analyzers and frequency counters
  • Optical networking and DWDM systems
  • Military and aerospace electronics
  • High-speed data communication clock sources
Product Introduction: OC5SC25 Product Introduction

The OC5SC25 is a high-performance Oven-Controlled Crystal Oscillator (OCXO) manufactured by CTI (Crystal Technology Inc.). Designed for applications requiring extreme frequency stability, this 10 MHz oscillator uses an SC-cut crystal resonator enclosed in a precision temperature-controlled oven, maintaining the crystal at a constant temperature (typically around 85°C) to virtually eliminate frequency drift caused by ambient temperature variations. The ‘OC5’ prefix indicates a 5V supply voltage, while ‘SC25’ refers to the SC-25 package form factor (25x25mm footprint). The OC5SC25 delivers exceptional frequency stability of ±0.01 ppm at room temperature, and maintains ±0.1 ppm stability across the full -40°C to +85°C operating temperature range. This level of performance is typically 100-500 times better than standard XO crystals and 10-50 times better than TCXOs. The square wave output provides clean, fast-edged digital signals compatible with TTL and CMOS logic families, making it ideal for direct interfacing with FPGAs, microcontrollers, and digital systems. The output rise and fall times of 10ns/12ns ensure crisp signal edges for high-speed digital applications. The device features a built-in heater and temperature control circuitry that maintains the crystal at its turnover point temperature. Warm-up time is typically 3-5 minutes to reach within ±0.2 ppm of the final frequency. Steady-state power consumption is approximately 600mW (120mA @ 5V), with higher draw during the warm-up phase. Many versions include a voltage control pin (VCXO capability) for fine frequency adjustment, useful for synchronization applications.

Working Principle: OC5SC25 Working Principle

The OC5SC25 operates on the principle of oven-controlled crystal oscillation, providing exceptional frequency stability through active temperature control: 1) Crystal Resonator: An SC-cut (Stress Compensated) quartz crystal resonator forms the resonant element of the oscillator. SC-cut crystals have an inflection point (turnover temperature) where the frequency-temperature coefficient is near zero, providing inherently better stability than AT-cut crystals. 2) Oscillation Circuit: A sustaining amplifier drives the crystal at its resonant frequency, producing a stable sinusoidal or square-wave output. The oscillation circuit is designed for low phase noise and high frequency purity. 3) Oven (Heater) Assembly: The crystal and critical oscillator components are enclosed inside a thermally insulated oven chamber. An electric heater maintains the chamber at a constant temperature (typically 75-85°C), which is set to match the crystal’s turnover temperature. At this temperature, the crystal’s frequency is least sensitive to temperature variations. 4) Temperature Control Loop: A precision temperature sensor (often a thermistor or diode) inside the oven feeds back to a control circuit that regulates the heater current. This closed-loop control maintains the oven temperature to within millidegrees of the setpoint, even as ambient temperature varies over a wide range. 5) Output Buffer: A high-speed output buffer amplifies and shapes the oscillator signal to produce a clean square wave with specified logic levels (CMOS/TTL compatible) and fast rise/fall times. 6) Frequency Tuning (Optional): Many OCXO variants include a varactor diode or voltage-controlled tuning capability. Applying a control voltage to the tuning pin slightly shifts the oscillator frequency, allowing fine adjustment for calibration or synchronization purposes (e.g., locking to a GPS reference). 7) Warm-up Phase: When power is first applied, the oven is at ambient temperature and the heater draws maximum current. As the oven warms up, the frequency stabilizes. The warm-up time (3-5 minutes for the OC5SC25) is the time required to reach the specified frequency stability after power-on.

Pin Description: OC5SC25 Pin Definition and Functions
Pin Name Type Function
1 VCC Power Supply voltage +5V
2 GND Ground Ground
3 OUT Output 10MHz square wave output (CMOS/TTL)
4 VC Input Voltage control / frequency tuning (optional)
5 GND Ground Case ground (connect to system ground)

Note: Pin configuration may vary by manufacturer. SC-25 packages typically have pins on the bottom or sides. Refer to specific datasheet for exact pinout.

Application Scenarios: In which products and applications is OC5SC25 used
  • Cellular base station reference clock sources (GSM, LTE, 5G)
  • Precision frequency references for test and measurement instruments
  • GPS-disciplined oscillators (GPSDO)
  • Network timing and synchronization (PTP/IEEE 1588, SyncE)
  • Optical networking and DWDM system clock sources
  • Military communications and radar systems
  • Spectrum analyzers, signal generators, and frequency counters
  • High-speed data converter clocking (ADC/DAC)
Alternative Models: What chips are recommended as replacements for OC5SC25
Manufacturer Part Number Package Notes
CTI OC3SC25 SC-25 3.3V supply variant
CTI OC5SC25S SC-25 Sine wave output version
Rakon OCXO-10MHz SC-25 10MHz OCXO alternative
VCXO/ConnorWinfield OCXO series SC-25/DIP-14 Various OCXO options
Morion MV89/10MHz TO-8 / SC-25 High stability OCXO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1