Product Overview
The MSP430F5304IRGZR is an ultra-low-power 16-bit microcontroller from Texas Instruments’ MSP430 series. Featuring the MSP430 CPUXV2 core running up to 25MHz, this device offers 8KB Flash memory, 6KB RAM, a 10-bit ADC, multiple 16-bit timers, DMA, hardware multiplier, and serial communication interfaces (UART/SPI/I²C). Packaged in a 48-pin VQFN (RGZ), the MSP430F5304 is optimized for battery-powered measurement and sensing applications requiring both low power and high analog integration.
Key Specifications
| Manufacturer | Texas Instruments |
| Core | MSP430 CPUXV2 (16-bit RISC) |
| Maximum Frequency | 25 MHz |
| Flash Memory | 8 KB |
| RAM | 6 KB |
| ADC | 10-bit SAR, 6 channels |
| GPIO Pins | 31 |
| Timers | 4 × 16-bit (TA0, TA1, TA2, TB0) |
| UART | 1 (via USCI_A) |
| SPI | 2 (via USCI) |
| I²C | 1 (via USCI_B) |
| DMA | 3-channel |
| Hardware Multiplier | Yes (16×16, 32-bit support) |
| RTC | Yes (RTC_B with alarm) |
| Supply Voltage | 1.8V to 3.6V |
| Active Mode Current | 195 µA/MHz (typical @ 8MHz, 3V) |
| Standby Mode (LPM3) | 1.9 µA (with RTC, 2.2V) |
| Shutdown Mode (LPM4.5) | 0.18 µA (typical) |
| Wake-up Time | < 5 µs from standby |
| Operating Temperature | -40°C to +85°C |
| Package | VQFN-48 (RGZ), 7mm × 7mm |
Features
- Ultra-low power consumption across all operating modes
- 16-bit RISC architecture, up to 25MHz system clock
- Five low-power modes: LPM0 through LPM4.5
- Wake from standby in less than 5 µs
- Unified Clock System (UCS) with FLL for frequency stabilization
- Integrated LDO with programmable core supply
- Supply voltage supervisor (SVM/SVS) with brownout detection
- 10-bit SAR ADC with 6 input channels
- 4 × 16-bit timers with capture/compare registers
- 3-channel DMA controller
- Hardware multiplier (16×16, 32-bit support)
- RTC module with alarm capabilities
- Port mapping controller for flexible I/O assignment
- JTAG and Spy-Bi-Wire debug interfaces
- Secure debug support
- RoHS compliant, lead-free VQFN-48 package
- Battery-powered portable instruments
- Sensor nodes and data acquisition systems
- Industrial control and monitoring
- Smart metering (energy, water, gas)
- Medical and healthcare devices
- Consumer electronics accessories
- Building automation and HVAC control
- Wireless sensor network end nodes
- Portable and battery-powered measurement instruments
- Smart energy, water, and gas metering
- Wireless sensor network end nodes
- Industrial sensor interfaces and data loggers
- Medical wearables and diagnostic devices
- Building automation sensors and controllers
- Consumer electronics with long battery life requirements
- HVAC monitoring and control systems
Applications
Product Introduction: MSP430F5304IRGZR Product Introduction
The MSP430F5304IRGZR is a member of Texas Instruments’ MSP430F5xx family of ultra-low-power mixed-signal microcontrollers, renowned for their industry-leading power efficiency and flexible peripheral integration. The part number breaks down as follows: ‘MSP430’ denotes the MSP430 16-bit MCU series, ‘F530’ indicates the F530x subfamily with integrated 3.3V LDO and ADC10, ‘4’ specifies the memory configuration (8KB Flash, 6KB RAM), ‘I’ indicates industrial temperature range (-40°C to +85°C), ‘RGZ’ is the 48-pin VQFN package designator, and ‘R’ denotes tape-and-reel packaging. At the heart of the MSP430F5304 is the CPUXV2 core, a 16-bit RISC processor with 27 instructions and 16 registers, running at speeds up to 25MHz. The architecture is optimized for maximum code efficiency, with constant generators and a von Neumann memory architecture that allows uniform access to all memory, peripherals, and registers. The MCU features 8KB of in-system programmable Flash memory and 6KB of RAM. A built-in 3.3V LDO regulator simplifies power supply design, generating the internal core voltage from a single 1.8V-3.6V supply. A standout feature is the 10-bit SAR ADC with up to 6 input channels, capable of sampling at rates up to 200ksps. The ADC supports multiple reference sources and includes an internal temperature sensor. System peripherals include four 16-bit timers (Timer_A and Timer_B), a 3-channel DMA controller, and a hardware multiplier supporting 16×16 and 32-bit operations. Serial communication is handled by the Universal Serial Communication Interface (USCI), which can be configured for UART, SPI, or I²C operation. The MSP430F5304 includes one USCI module in the 48-pin package. The integrated RTC module provides real-time clock functionality with alarm features, independent of the main CPU. True to the MSP430 legacy, the F5304 offers five low-power modes (LPM0 through LPM4.5) with standby currents as low as 1.9µA in LPM3 (RTC active) and just 0.18µA in LPM4.5 shutdown mode. The digitally controlled oscillator (DCO) allows wake-up from any low-power mode to active mode in less than 5µs, enabling duty-cycled applications to maximize battery life.
Working Principle: MSP430F5304IRGZR Working Principle
The MSP430F5304IRGZR operates as a complete mixed-signal microcontroller system with the following architecture: 1) CPU Core (MSP430 CPUXV2): A 16-bit RISC processor with 27 core instructions, 16 registers, and constant generators. The core uses a von Neumann architecture where all memory and peripherals share a common address space. It supports 16-bit and 20-bit addressing modes for extended memory access. 2) Unified Clock System (UCS): Generates all system clocks from multiple sources: – LFXT1: Low-frequency 32kHz crystal (for ACLK, RTC) – XT2: High-frequency crystal up to 32MHz (for MCLK/SMCLK) – DCO: Digitally controlled oscillator with FLL for frequency stabilization – VLO: Very low power internal oscillator (~10kHz) – REFO: Trimmed internal reference (~32.768kHz) Three main clocks are distributed: MCLK (CPU clock, up to 25MHz), SMCLK (peripheral clock), and ACLK (auxiliary/real-time clock, ~32kHz). 3) Power Management Module (PMM): Includes an integrated LDO that generates the core supply voltage from the I/O supply. Features supply voltage supervisor (SVM) and supply voltage supervisor (SVS) for brownout detection and power-fail reset. Supports programmable core voltage levels for power optimization. 4) Memory System: – 8KB Flash: In-system programmable, used for code and data storage – 6KB RAM: Static RAM for data and stack – Information memory: Smaller Flash segments for non-volatile data storage 5) 10-bit SAR ADC: A successive approximation analog-to-digital converter with up to 6 input channels. Features include selectable reference voltages, auto-sequencing, and conversion results transferable via DMA. Includes an internal temperature sensor. 6) Timer Peripherals: – Timer_A0: 16-bit timer with 5 capture/compare registers (PWM capable) – Timer_A1: 16-bit timer with 3 capture/compare registers – Timer_A2: 16-bit timer with 3 capture/compare registers – Timer_B0: 16-bit timer with 7 capture/compare shadow registers 7) Universal Serial Communication Interface (USCI): One USCI module supporting multiple protocols: – UART mode with auto baud rate detection – SPI mode (master/slave) – I²C mode (multi-master capable) 8) DMA Controller: 3-channel DMA that can transfer data between peripherals and memory without CPU intervention, reducing power consumption by allowing the CPU to remain in low-power modes. 9) Hardware Multiplier: A 16×16-bit multiplier peripheral supporting unsigned, signed, and multiply-accumulate operations. Can also perform 32-bit operations, useful for DSP-like math. 10) RTC_B: Real-time clock module with calendar mode (seconds through years), alarm functionality, and calendar comparison registers. 11) I/O Ports: Up to 31 GPIO pins with interrupt capability on Port 1 and Port 2. A port mapping controller allows flexible assignment of peripheral functions to I/O pins. 12) Debug Interface: JTAG and Spy-Bi-Wire (2-wire JTAG) interfaces for programming and on-chip debugging.
Pin Description: MSP430F5304IRGZR Pin Definition and Functions
| Pin Group | Pin Names | Function |
|---|---|---|
| Power | DVCC, DVSS, AVCC, AVSS | Digital and analog power/ground |
| Reset | RST/NMI | Reset / Non-maskable interrupt |
| JTAG/SBW | TCK, TMS, TDI, TDO, TEST | JTAG and Spy-Bi-Wire debug pins |
| Oscillators | XIN, XOUT, XT2IN, XT2OUT | 32kHz XT1 and high-frequency XT2 crystal pins |
| Port 1 | P1.0 – P1.7 | 8 GPIO with interrupt capability (peripheral: TA0, USCI) |
| Port 2 | P2.0 – P2.7 | 8 GPIO with interrupt capability (peripheral: TA1, TB0, USCI) |
| Port 3 | P3.0 – P3.7 | 8 GPIO (peripheral: TB0, USCI, DMA) |
| Port 4 | P4.0 – P4.7 | 8 GPIO with port mapping controller |
| Port 6 (ADC) | P6.0 – P6.7 | Analog inputs A0-A7, comparator B inputs |
| Analog | VeREF+, VeREF- | External reference voltage for ADC |
| Ground Pad | EP (Exposed Pad) | Connect to VSS for thermal dissipation |
VQFN-48 (RGZ) package, 7.0 × 7.0 × 0.95 mm. Exposed thermal pad must be soldered to ground.
Application Scenarios: In which products and applications is MSP430F5304IRGZR used
Alternative Models: What chips are recommended as replacements for MSP430F5304IRGZR
| Manufacturer | Part Number | Description |
|---|---|---|
| TI | MSP430F5308IRGZR | 16KB Flash, 4KB RAM version |
| TI | MSP430F5309IRGZR | 24KB Flash, 4KB RAM version |
| TI | MSP430F5310IRGZR | 32KB Flash, 6KB RAM, 2 USCIs |
| TI | MSP430F5304IPTR | Same die, LQFP-48 package |
| TI | MSP430FR2355 | FRAM-based alternative, similar features |
Recommend Parts

ISO1176TDWR
Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16
Brand: TI
Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)
IN STOCK: 6874pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4020PBF
200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 14149pcs
Cargo cycle: 3-7 Days
The minimum order is 1

NRF52832-QFAA-T
Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48
Brand: Nordic Semiconductor
Package: See datasheet
IN STOCK: 10958pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







