Opens in a new tab

OPA2604AP

Dual FET-input audio op-amp, 0.0003% THD, 20MHz, DIP-8 package

6420

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2604AP

Package:

DIP-8 / PDIP-8 (6.35 x 9.27 x 3.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OPA2604AP is a high-performance, dual-channel operational amplifier specifically designed for high-fidelity audio applications. Originally developed by Burr-Brown (now Texas Instruments), this FET-input op-amp delivers exceptional sound quality with very low total harmonic distortion and noise. The AP package variant provides a DIP-8 through-hole package favored by audio enthusiasts and DIY builders for prototyping and high-end audio equipment construction.

Key Specifications

Number of Channels 2 (Dual)
Supply Voltage Range ±4.5V to ±24V
Gain Bandwidth Product 20 MHz
Slew Rate 25 V/μs
Input Offset Voltage 1 mV (max)
Input Bias Current 50 pA (typ)
THD + N 0.0003% @ 1 kHz
Input Noise Voltage 10 nV/√Hz @ 1 kHz
Supply Current 5.5 mA per channel
Operating Temperature -40°C to +85°C
Package Type DIP-8 (AP)

Features

  • Ultra-low total harmonic distortion: 0.0003%
  • JFET-input for ultra-low input bias current
  • 20 MHz gain bandwidth product
  • Wide supply voltage range: ±4.5V to ±24V
  • High output current drive capability
  • Low noise: 10 nV/√Hz at 1 kHz
  • Unity-gain stable operation
  • Classic DIP-8 through-hole package

Applications

  • High-end audio preamplifiers
  • Professional audio mixing consoles
  • Headphone amplifiers
  • Active crossover networks
  • Premium DAC output stages
  • Phono preamplifiers
  • Studio recording equipment
Product Introduction: OPA2604AP Product Introduction

The OPA2604AP is a premium dual operational amplifier renowned among audiophiles and audio engineers for its exceptional sonic performance. Developed by Burr-Brown and now part of the Texas Instruments portfolio, this device features JFET input stages that provide extremely low input bias current (50 pA typical) and high input impedance, making it ideal for high-impedance signal sources such as phono cartridges and passive volume controls. With total harmonic distortion measured at just 0.0003% at 1 kHz, the OPA2604 delivers transparent signal reproduction with virtually no added coloration. The amplifier operates from dual supplies ranging from ±4.5V to ±24V, offering ample headroom for professional audio line-level signals. Packaged in a classic DIP-8 through-hole format, the AP variant is particularly popular among audio enthusiasts for easy socket-based installation and upgrades in vintage and modern audio equipment alike. The OPA2604 has earned a legendary reputation in the audio community for its warm, detailed sound signature and outstanding value.

Working Principle: OPA2604AP Working Principle

The OPA2604AP utilizes a JFET-input differential pair in its input stage, which provides the ultra-high input impedance and low input bias current characteristic of FET devices. The input JFET pair is biased at an optimized current level to achieve the best balance between noise performance and transconductance. A second gain stage uses bipolar transistors to provide high voltage gain and drive the output stage. The output stage employs a class AB push-pull configuration with emitter followers, capable of sourcing and sinking significant output current to drive low-impedance headphone loads and long cable runs. The internal compensation network is carefully designed to ensure unity-gain stability while preserving the wide bandwidth needed for high-fidelity audio reproduction. The symmetrical circuit layout and matched components contribute to the device’s excellent common-mode rejection ratio and power supply rejection, which help minimize the impact of power supply noise on audio signal purity.

Pin Description: OPA2604AP Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Amplifier A output
2 IN A- Input Amplifier A inverting input
3 IN A+ Input Amplifier A non-inverting input
4 V- Power Negative supply voltage (both channels)
5 IN B+ Input Amplifier B non-inverting input
6 IN B- Input Amplifier B inverting input
7 OUT B Output Amplifier B output
8 V+ Power Positive supply voltage (both channels)
Application Scenarios: In which products and applications is OPA2604AP used
  • High-end audio preamplifiers and line stages
  • Professional studio mixing and recording equipment
  • High-performance headphone amplifiers
  • Active crossover networks for speaker systems
  • Premium DAC output buffering and filtering
  • Phono preamplifiers for vinyl playback
Alternative Models: What chips are recommended as replacements for OPA2604AP
Manufacturer Part Number Package Notes
Analog Devices AD827 DIP-8 Dual high-speed audio op-amp
Texas Instruments OPA2134 DIP-8 SoundPlus premium audio dual op-amp
National Semi LME49720 DIP-8 Ultra-low distortion dual audio op-amp
Burr-Brown OPA2132 DIP-8 FET-input dual audio op-amp

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1