Product Overview
The PC923LENIP0F is a high-speed, insulated gate bipolar transistor (IGBT) and MOSFET gate driver optocoupler designed for driving power switching devices in high-voltage applications. Featuring a built-in high-output-current buffer stage and galvanic isolation between the input logic side and output drive side, this device provides safe and efficient control of power semiconductors in inverter, motor drive, and switching power supply designs. The LENIP0F variant offers a wide operating temperature range and comes in a compact surface-mount package optimized for high-density power electronics layouts.
Key Specifications
| Isolation Voltage | 5000 Vrms (1 min) |
| Output Peak Current | ±2.0 A (source/sink) |
| Supply Voltage Range | 15V to 30V |
| Input Logic Supply | 3.3V / 5V compatible |
| Propagation Delay | 200 ns (max) |
| Rise/Fall Time | 50 ns (max) |
| Common-Mode Transient Immunity | 50 kV/μs (min) |
| Operating Temperature | -40°C to +105°C |
| UVLO Threshold | 11.5V (typical) |
| Package Type | SOIC-8 / LENIP0F |
Features
- 2.0A peak output current drive capability
- 5000Vrms reinforced galvanic isolation
- High common-mode transient immunity: 50 kV/μs
- Integrated under-voltage lockout (UVLO)
- Fast propagation delay: 200ns max
- Wide output supply range: 15V to 30V
- CMOS/TTL compatible input logic
- IGBT and SiC MOSFET gate drives
- Industrial motor drives and inverters
- Switch-mode power supplies (SMPS)
- Uninterruptible power supplies (UPS)
- Solar inverter systems
- Welding equipment
- Induction heating systems
- IGBT gate drivers in three-phase motor inverters
- SiC and silicon MOSFET gate drive circuits
- Industrial variable frequency drives (VFDs)
- High-power switch-mode power supplies
- Photovoltaic central and string inverters
- Industrial welding and induction heating equipment
Applications
Product Introduction: PC923LENIP0F Product Introduction
The PC923LENIP0F is an optocoupled gate driver specifically designed for driving IGBTs and power MOSFETs in high-voltage power electronic systems. This device combines a high-speed infrared LED input with an integrated photodetector and output driver stage, providing 5000Vrms of galvanic isolation between the low-voltage control circuitry and the high-voltage power stage. The output stage is capable of sourcing and sinking up to 2.0A peak current, enabling fast switching of large-gate-charge IGBTs and MOSFETs for high-efficiency operation. Built-in under-voltage lockout (UVLO) circuitry protects the power device from insufficient gate drive voltage, which could lead to excessive power dissipation and potential device failure. The PC923LENIP0F features high common-mode transient immunity (CMTI) of 50 kV/μs minimum, ensuring reliable operation in noisy switching environments where rapid voltage transients are common. With propagation delay of less than 200ns across temperature and supply variations, this gate driver is suitable for high-frequency switching applications including resonant converters and high-frequency inverters. The SOIC-8 wide-body package provides adequate creepage and clearance distances for reinforced isolation requirements in industrial and automotive applications.
Working Principle: PC923LENIP0F Working Principle
The PC923LENIP0F operates on the principle of optical isolation combined with an integrated high-current gate driver output stage. On the input side, a gallium arsenide (GaAs) infrared LED converts the electrical input logic signal into light pulses. This infrared light passes through a transparent insulating isolation barrier (typically polyimide or air gap) to a photodetector array on the output side. The photodetector converts the light signal back into an electrical signal, which is then fed through a high-gain amplifier and signal conditioning circuitry. The output driver stage consists of complementary MOSFET or bipolar transistors arranged in a push-pull configuration, capable of sourcing and sinking high peak currents to rapidly charge and discharge the gate capacitance of the power switching device. An integrated under-voltage lockout (UVLO) circuit continuously monitors the output supply voltage. If VCC drops below the UVLO threshold (typically 11.5V), the output is forced low to ensure the power switch remains in the off-state, preventing operation at insufficient gate drive levels. The internal architecture is designed to achieve very high common-mode transient immunity by using differential detection techniques and careful shielding of the photodetector from electric field effects.
Pin Description: PC923LENIP0F Pin Definition and Functions
| Pin | Name | Side | Function |
|---|---|---|---|
| 1 | ANODE | Input | LED anode – connect to logic drive signal |
| 2 | CATHODE | Input | LED cathode – connect to input ground |
| 3 | VEE (GND1) | Input | Input side ground / negative supply |
| 4 | NC | – | No connection (isolation barrier) |
| 5 | VEE (GND2) | Output | Output side ground / negative supply |
| 6 | VOUT | Output | Gate drive output (connect to IGBT/MOSFET gate) |
| 7 | VCC | Output | Output side positive supply voltage (15-30V) |
| 8 | DESAT / FAULT | Output | Desaturation detection / fault output (varies by variant) |
Application Scenarios: In which products and applications is PC923LENIP0F used
Alternative Models: What chips are recommended as replacements for PC923LENIP0F
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Broadcom | ACPL-P343 | SO-6 | 2.5A IGBT gate driver optocoupler, 5kV isolation |
| Infineon | 1ED020I12-F | DSO-8 | 2A gate driver, coreless transformer isolation |
| Silicon Labs | Si8233 | SOIC-8 | 4A dual gate driver, capacitive isolation |
| TI | UCC21750 | SOIC-16 | Single-channel isolated gate driver, 10A |
Recommend Parts

ISO1176TDWR
Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16
Brand: TI
Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)
IN STOCK: 6874pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4020PBF
200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 14149pcs
Cargo cycle: 3-7 Days
The minimum order is 1

NRF52832-QFAA-T
Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48
Brand: Nordic Semiconductor
Package: See datasheet
IN STOCK: 10958pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







