Opens in a new tab

PC925LENIP0F

IGBT gate driver optocoupler, 2.5A, desaturation protection, Miller clamp, SOIC-16

4200

Effective Inventory

Image for reference only

Manufacturer Part:

PC925LENIP0F

Package:

SOIC-16 wide body / LENIP0F (10.3 x 7.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PC925LENIP0F is a high-performance optocoupled IGBT/MOSFET gate driver with integrated desaturation detection and fault feedback capabilities. Designed for demanding power electronics applications requiring robust protection and reliable isolation, this device combines a 2.5A peak output gate driver with comprehensive protection features including under-voltage lockout, desaturation (VCE sat) monitoring, and active miller clamping. The LENIP0F surface-mount package provides 5000Vrms isolation and is suitable for industrial inverters, motor drives, and renewable energy power conversion systems.

Key Specifications

Isolation Voltage 5000 Vrms (reinforced)
Output Peak Current ±2.5 A
Output Supply Voltage 15V to 30V
Input Logic Supply 3.3V / 5V CMOS compatible
Propagation Delay 250 ns (max)
Desaturation Detection Threshold 9V (typical)
Common-Mode Transient Immunity 50 kV/μs (min)
UVLO Threshold (VCC2) 11.5V (typical)
Active Miller Clamp Integrated
Operating Temperature -40°C to +105°C
Package Type SOIC-16 wide body / LENIP0F

Features

  • 2.5A peak output gate drive current
  • Integrated desaturation (VCE) fault detection
  • Active Miller clamp for enhanced noise immunity
  • Under-voltage lockout protection
  • 5000Vrms reinforced galvanic isolation High CMTI: 50 kV/μs minimum
  • Fault status feedback output
  • Wide operating temperature range: -40°C to +105°C

Applications

  • Industrial variable frequency drives (VFD)
  • IGBT-based inverter systems
  • Renewable energy inverters (solar, wind)
  • Uninterruptible power supplies (UPS)
  • Electric vehicle charging stations
  • Welding power supplies
  • High-power DC-DC converters
Product Introduction: PC925LENIP0F Product Introduction

The PC925LENIP0F is a feature-rich, optocoupled gate driver specifically engineered for IGBT and high-power MOSFET applications requiring robust protection and reliable high-voltage isolation. Building on the proven PC923 architecture, the PC925 adds critical protection features including desaturation detection, active Miller clamping, and fault status feedback output, making it an ideal choice for high-reliability power electronic systems. The device delivers ±2.5A peak output current, sufficient to drive large-gate IGBT modules commonly used in industrial motor drives and renewable energy inverters. The integrated desaturation detection circuit monitors the collector-emitter voltage of the driven IGBT during the on-state, detecting fault conditions such as short circuits or overloads that would cause excessive VCE saturation voltage. When a fault is detected, the gate is promptly brought low and a fault signal is communicated back across the isolation barrier to the controller side. The active Miller clamp provides a low-impedance path to ground during the off-state, preventing parasitic turn-on caused by Miller current coupling in high-side switch applications. With reinforced isolation of 5000Vrms and high common-mode transient immunity of 50 kV/μs, the PC925LENIP0F ensures reliable operation in the presence of the large voltage slew rates typical of modern high-speed power converter designs.

Working Principle: PC925LENIP0F Working Principle

The PC925LENIP0F operates as a galvanically isolated gate driver with integrated protection features, using an optical coupling mechanism for signal transfer across the isolation barrier. The input side contains an infrared LED that converts the PWM control signal into light pulses, which are detected by a photodiode array on the output side. The output side incorporates several functional blocks: a high-gain signal amplifier, a 2.5A push-pull output driver stage, and multiple protection circuits. The desaturation detection circuit works by monitoring the IGBT’s collector-emitter voltage through an external high-voltage diode connected to the DESAT pin. During normal on-state operation, VCE is low and the DESAT voltage stays below the detection threshold. If a fault occurs (such as a short circuit), VCE rises, charging the DESAT capacitor. When the voltage exceeds the 9V threshold, a fault condition is triggered, immediately soft-turning off the IGBT gate and latching the fault state. The active Miller clamp activates when the gate voltage falls below approximately 2V during turn-off, providing a low-impedance path from gate to emitter to sink any displacement current coupled through the Miller capacitance, preventing unintended turn-on. The UVLO circuit ensures the output driver remains in the low state whenever the supply voltage is insufficient for proper IGBT operation. A separate fault feedback channel communicates fault events back across the isolation barrier to the controller.

Pin Description: PC925LENIP0F Pin Definition and Functions
Pin Name Side Function
1 ANODE Input Input LED anode (PWM signal input)
2 CATHODE Input Input LED cathode
3 VCC1 Input Input side supply voltage (3.3V/5V)
4 GND1 Input Input side ground
5 FAULT Input Fault status feedback output (open collector)
6-8 NC – No connection (isolation barrier)
9-11 NC – No connection (isolation barrier)
12 GND2 / VEE Output Output side ground / negative rail
13 OUT / VEE Output Gate drive output (to IGBT gate)
14 CLAMP Output Active Miller clamp output
15 DESAT Output Desaturation detection input (connect to HV diode)
16 VCC2 Output Output side positive supply (15-30V)
Application Scenarios: In which products and applications is PC925LENIP0F used
  • Three-phase industrial motor drives and VFDs
  • IGBT-based solar and wind power inverters
  • High-power uninterruptible power supply systems
  • EV charging station power conversion stages
  • Industrial arc welding power supplies
  • High-voltage DC-DC converter modules
Alternative Models: What chips are recommended as replacements for PC925LENIP0F
Manufacturer Part Number Package Notes
Broadcom ACPL-332J SO-16 2.5A gate driver, desat detection, fault feedback
Infineon 1EDC20I12MH DSO-16 2A isolated gate driver, DESAT, coreless transformer
TI UCC21750 SOIC-16 10A isolated gate driver with DESAT and sensing
Silicon Labs Si8285 SOIC-16 5A isolated gate driver, DESAT, Miller clamp

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1