Opens in a new tab

PIC16LF1937-I

8-bit XLP PIC MCU, 14KB Flash, 512B RAM, 256B EEPROM, 14-ch 10-bit ADC, 5 PWM, EUSART, SPI/I2C, 96-seg LCD, mTouch, 1.8-3.6V, 40-pin

8942

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16LF1937-I

Package:

40-pin PDIP / 44-pin TQFP / QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16LF1937-I is a 40-pin, 8-bit Flash-based CMOS microcontroller from Microchip Technology featuring the Enhanced Mid-Range core with eXtreme Low-Power (XLP) technology and integrated LCD driver. With 49 instructions and a 16-level deep hardware stack, this low-voltage MCU offers 14KB (8K x 14 words) of Flash program memory, 512 bytes of RAM, and 256 bytes of data EEPROM. Operating at up to 32 MHz across a low voltage range of 1.8V to 3.6V (LF variant), it integrates a 14-channel 10-bit ADC, two analog comparators, three ECCP and two CCP modules, an MSSP (SPI/I2C), an EUSART, mTouch capacitive sensing, a 96-segment LCD driver, and an integrated temperature indicator. With its LCD drive capability, mTouch sensing, and XLP low-power operation, the PIC16LF1937 is ideal for battery-powered LCD applications, thermostats, security systems, utility meters, and home automation devices requiring display and touch interfaces.

Key Specifications

Core Architecture 8-bit PIC (Enhanced Mid-Range Core)
Program Memory 14KB Flash (8K x 14 words)
RAM 512 bytes
Data EEPROM 256 bytes
Maximum Speed 32 MHz
Operating Voltage 1.8V to 3.6V (LF variant, XLP low-power)
I/O Pins 36
ADC 10-bit, 14 channels with voltage reference
Comparators 2, with selectable voltage reference
Timers 4 x 8-bit (TMR0/2/4/6) + 1 x 16-bit (TMR1)
PWM 3 x ECCP + 2 x CCP = 5 total PWM modules
Communication EUSART, SPI, I2C (MSSP)
LCD Driver Up to 96 segments (8 common x 24 segment)
Capacitive Touch mTouch sensing module
Temperature Indicator Integrated temperature sensor
Internal Oscillator 32 MHz (with software selectable 31 kHz-32 MHz)
Low Power XLP nanoWatt technology, 100 nA Sleep typical
Stack Levels 16
Debug Built-in In-Circuit Debug (ICD)
Operating Temperature -40°C to +85°C (Industrial)
Package 40-pin PDIP / 44-pin TQFP / QFN

Features

  • Enhanced Mid-Range core with 49 instructions and 16-level hardware stack
  • eXtreme Low-Power (XLP) nanoWatt technology
  • Low-voltage LF variant: 1.8V to 3.6V operation
  • Sleep mode current: 100 nA typical @ 2.0V
  • Operating current: 6.0 uA @ 32 kHz, 54 uA @ 1 MHz
  • 14-channel 10-bit ADC with selectable voltage reference (1.024/2.048/4.096V)
  • ADC can operate during Sleep mode
  • Two analog comparators with programmable voltage reference
  • Three Enhanced CCP (ECCP) modules with PWM steering and auto-shutdown
  • Two standard CCP (Capture/Compare/PWM) modules
  • Integrated LCD driver: up to 96 segments, supports static to 1/4 multiplex
  • mTouch capacitive sensing module for touch buttons/sliders
  • Integrated temperature indicator module
  • Master Synchronous Serial Port (MSSP): SPI and I2C
  • Enhanced USART (EUSART) with auto-baud detect
  • Internal 32 MHz oscillator factory calibrated to ±1%
  • Four 8-bit timers: TMR0, TMR2, TMR4, TMR6
  • One enhanced 16-bit Timer1 with low-power 32 kHz oscillator
  • Extended Watchdog Timer (EWDT)
  • Enhanced Power-On/Off-Reset
  • Brown-Out Reset (BOR)
  • In-Circuit Serial Programming (ICSP) via two pins
  • Built-in In-Circuit Debug (ICD), no debug header required
  • 36 I/O pins with 25 mA source/sink capability
  • Recommended for Automotive Design

Applications

  • Battery-powered LCD thermostats and HVAC controllers
  • Utility meters (electric, water, gas) with LCD display
  • Security systems and keypad controllers
  • Home automation with touch interfaces (mTouch)
  • Portable medical devices with LCD readout
  • Appliance user interfaces with display and touch
  • Industrial sensors with LCD indication
Product Introduction: PIC16LF1937-I Product Introduction

The PIC16LF1937 is a 40/44-pin Flash-based 8-bit CMOS microcontroller from Microchip Technology featuring the Enhanced Mid-Range core with eXtreme Low-Power (XLP) technology and integrated LCD driver. The ‘LF’ designation indicates a low-voltage variant operating from 1.8V to 3.6V. With 49 instructions and a 16-level deep hardware stack, it offers 14KB (8K x 14 words) of Flash program memory, 512 bytes of RAM, and 256 bytes of data EEPROM, operating at up to 32 MHz. Key features include an integrated LCD driver supporting up to 96 segments (8 common x 24 segment), mTouch capacitive sensing module for touch interfaces, and an integrated temperature indicator. The peripheral set also includes a 14-channel 10-bit ADC with selectable voltage references, two analog comparators, three Enhanced CCP (ECCP) modules, two standard CCP modules, an MSSP module for SPI/I2C communication, and an EUSART with auto-baud detect. XLP technology enables extremely low power consumption – only 100 nA in Sleep mode – making it ideal for battery-powered applications. Built-in ICD support eliminates the need for external debug headers. With its LCD drive capability, capacitive touch sensing, and ultra-low power consumption, the PIC16LF1937 is an excellent choice for thermostats, utility meters, security systems, portable medical devices, and home automation applications. Available in PDIP-40, TQFP-44, and QFN packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC16LF1937-I Working Principle

The PIC16LF1937 operates on the Enhanced Mid-Range PIC architecture with 49 instructions and a 16-level deep hardware stack. XLP (eXtreme Low-Power) technology provides industry-leading low power consumption with standby currents as low as 100 nA in Sleep mode. The LCD driver module generates all necessary waveforms for driving character and segment LCD panels directly, supporting up to 96 segments with static, 1/2, 1/3, or 1/4 multiplex configurations and selectable bias levels. The LCD can continue operating during Sleep mode, enabling always-on display applications with minimal power. The mTouch capacitive sensing module uses a charge-time measurement approach to detect finger proximity on capacitive pads, enabling touch button and slider interfaces without external components. The 10-bit ADC uses successive approximation register (SAR) architecture with 14 input channels and selectable voltage references (1.024V, 2.048V, 4.096V) for accurate measurements across the full operating voltage range. Three ECCP and two CCP modules provide five independent capture/compare/PWM channels for motor control, LED dimming, and timing applications. The MSSP module handles SPI and I2C communication, while the EUSART provides UART/LIN communication with auto-baud detection. The integrated temperature indicator enables temperature measurement using a calibrated on-chip sensor. Power management includes multiple low-power modes, Brown-Out Reset, and Extended Watchdog Timer for reliable low-voltage operation.

Pin Description: PIC16LF1937-I Pin Definition and Functions
Pin (PDIP-40) Name Type Function
1 MCLR/VPP/RE3 I/P Master Clear / Programming Voltage / Port E I/O
2 RA0/AN0/C1IN+ I/O Port A I/O / ADC0 / Comp1 In+
3 RA1/AN1/C2IN+ I/O Port A I/O / ADC1 / Comp2 In+
4 RA2/AN2/C12IN0- I/O Port A I/O / ADC2 / Comp Negative In 0
5 RA3/AN3/C12IN1- I/O Port A I/O / ADC3 / Comp Negative In 1
6 RA4/T0CKI I/O Port A I/O / Timer0 Clock Input
7 RA5/SS/AN4 I/O Port A I/O / SPI Slave Select / ADC Ch4
8 RE0/AN5/LCDSEG0 I/O Port E I/O / ADC5 / LCD Segment 0
9 RE1/AN6/LCDSEG1 I/O Port E I/O / ADC6 / LCD Segment 1
10 RE2/AN7/LCDSEG2 I/O Port E I/O / ADC7 / LCD Segment 2
11 VSS P Ground Reference
12 RD0/LCDSEG3 I/O Port D I/O / LCD Segment 3
13 RD1/LCDSEG4 I/O Port D I/O / LCD Segment 4
14 RD2/LCDSEG5 I/O Port D I/O / LCD Segment 5
15 RD3/LCDSEG6 I/O Port D I/O / LCD Segment 6
16 RC0/T1OSO/T1CKI/CCP3 I/O Port C I/O / T1OSO / T1CKI / CCP3
17 RC1/T1OSI/CCP2 I/O Port C I/O / T1OSI / CCP2
18 RC2/CCP1/P1A I/O Port C I/O / CCP1 / PWM1A
19 RC3/SCK/SCL I/O Port C I/O / SPI Clock / I2C Clock
20 RD4/LCDSEG7 I/O Port D I/O / LCD Segment 7
21 RD5/LCDSEG8 I/O Port D I/O / LCD Segment 8
22 RD6/LCDSEG9 I/O Port D I/O / LCD Segment 9
23 RD7/LCDSEG10 I/O Port D I/O / LCD Segment 10
24 RC4/SDI/SDA I/O Port C I/O / SPI Data In / I2C Data
25 RC5/SDO I/O Port C I/O / SPI Data Out
26 RC6/TX/CK I/O Port C I/O / EUSART TX/Clock
27 RC7/RX/DT I/O Port C I/O / EUSART RX/Data
28 VSS P Ground Reference
29 VDD P Positive Supply Voltage
30 RB0/INT/LCDCOM0 I/O Port B I/O / Ext Interrupt / LCD Common 0
31 RB1/LCDCOM1 I/O Port B I/O / LCD Common 1
32 RB2/LCDCOM2 I/O Port B I/O / LCD Common 2
33 RB3/PGM/LCDCOM3 I/O Port B I/O / LVP / LCD Common 3
34 RB4/LCDSEG11 I/O Port B I/O / LCD Segment 11
35 RB5/LCDSEG12 I/O Port B I/O / LCD Segment 12
36 RB6/ICSPCLK/LCDSEG13 I/O Port B I/O / ICSP Clock / LCD Segment 13
37 RB7/ICSPDAT/LCDSEG14 I/O Port B I/O / ICSP Data / LCD Segment 14
38 OSC1/CLKIN/RA7 I Oscillator Input / Clock Input / Port A I/O
39 OSC2/CLKOUT/RA6 O Oscillator Output / Clock Output / Port A I/O
40 VDD P Positive Supply Voltage
Application Scenarios: In which products and applications is PIC16LF1937-I used
  • Smart thermostats and HVAC controllers with LCD display
  • Utility meters (electricity, water, gas) with LCD readout
  • Security systems and access control keypads
  • Home automation panels with capacitive touch buttons
  • Portable medical devices with LCD displays
  • Home appliances with user interface and display
  • Battery-powered sensor nodes with LCD indication
Alternative Models: What chips are recommended as replacements for PIC16LF1937-I
Manufacturer Part Number Package Notes
Microchip PIC16F1937-I 40-pin Standard voltage 1.8-5.5V, same features
Microchip PIC16LF1939-I 40-pin 28KB Flash, 1024B RAM, mTouch, more memory
Microchip PIC16LF1936-I 28-pin 14KB Flash, 512B RAM, 256B EEPROM, smaller
Microchip PIC16LF1947-I 40-pin 7KB Flash, 256B RAM, 256B EEPROM, lower cost
Microchip PIC18LF46K90-I 40-pin PIC18 core, 64KB Flash, 12-bit ADC, RTCC

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1