Opens in a new tab

PIC18F1330-I

PIC18 8-bit MCU, 8KB Flash, 256B RAM, 128B EEPROM, 4-ch 10-bit ADC, 6 PWM (motor control), 3 comparators, EUSART/LIN, 18-pin

4530

Effective Inventory

Image for reference only

Manufacturer Part:

PIC18F1330-I

Package:

18-pin PDIP / SOIC / SSOP / QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC18F1330-I is an 18-pin, 8-bit high-performance Flash microcontroller from Microchip Technology featuring the PIC18 architecture with specialized motor control peripherals. With 4096 single-word instructions and a 31-level deep hardware stack, this compact MCU offers 8KB (4K x 16) of Flash program memory, 256 bytes of RAM, and 128 bytes of data EEPROM. Operating at up to 40 MHz (10 MIPS), it integrates a 4-channel 10-bit ADC, three analog comparators, six PWM outputs with power control features, a 16-bit EUSART with LIN support, and an 8 MHz internal oscillator. Designed specifically for motor control and power conversion applications, the PIC18F1330’s Power Control PWM module provides flexible half-bridge/full-bridge drive capabilities with auto-shutdown on fault conditions. Its small 18-pin footprint makes it ideal for space-constrained motor control, power supply, lighting, and automotive applications.

Key Specifications

Core Architecture 8-bit PIC18 RISC Architecture
Program Memory 8KB Flash (4K x 16 words)
RAM 256 bytes
Data EEPROM 128 bytes
Maximum Speed 40 MHz (10 MIPS)
Operating Voltage 4.2V to 5.5V
I/O Pins 16
ADC 10-bit, 4 channels, 200 Ksps
Comparators 3 analog comparators
Timers 2 timers (Timer0 8-bit, Timer1 16-bit)
PWM 6 PWM outputs (Power Control PWM module), 14-bit
Communication EUSART (UART/LIN)
Internal Oscillator 8 MHz, with 6 selectable frequencies
PLL 4x PLL (available with internal and HS modes)
Stack Levels 31-level hardware stack
Hardware Multiplier 8 x 8 single-cycle hardware multiplier
Low Power nanoWatt technology
Debug In-Circuit Debug (ICD)
Operating Temperature -40°C to +85°C (Industrial)
Package 18-pin PDIP / SOIC / SSOP / QFN

Features

  • High-performance PIC18 RISC CPU with 4096 single-word instructions
  • 10 MIPS operation at 40 MHz
  • 16-bit wide instructions, 8-bit wide data path
  • 31-level deep software accessible hardware stack
  • 8 x 8 single-cycle hardware multiplier
  • Priority levels for interrupts
  • Power Control PWM Module: 6 PWM outputs, 14-bit resolution
  • Half-bridge, full-bridge, and push-pull PWM modes
  • Programmable dead time and auto-shutdown on fault
  • 4-channel 10-bit ADC with 200 Ksps conversion rate
  • Three analog comparators with programmable voltage reference
  • Enhanced Addressable USART with LIN/J2602 support
  • Auto-baud detect and auto-wake-up on Start bit
  • Internal 8 MHz oscillator with 6 selectable frequencies (31 kHz-8 MHz)
  • 4x PLL for up to 32 MHz operation from internal oscillator
  • Fail-Safe Clock Monitor for reliable operation
  • Two-Speed Oscillator Start-up
  • Timer0: 8-bit timer/counter with 8-bit prescaler
  • Timer1: 16-bit timer/counter with prescaler
  • Power-managed modes: Run, Idle, Sleep
  • Extended Watchdog Timer (WDT) with 16-bit prescaler
  • Brown-out Reset (BOR) and Power-on Reset (POR)
  • Self-programmable under software control
  • In-Circuit Serial Programming (ICSP) via two pins
  • In-Circuit Debug (ICD) support
  • Programmable code protection
  • Recommended for Automotive Design

Applications

  • Brushless DC (BLDC) motor control
  • Switch-mode power supplies (SMPS) and DC-DC converters
  • LED lighting drivers and ballasts
  • Automotive motor control and sensor interfaces
  • Fan and pump control systems
  • Power management and battery chargers
  • Industrial small motor drives
Product Introduction: PIC18F1330-I Product Introduction

The PIC18F1330 is an 18-pin high-performance 8-bit Flash microcontroller from Microchip Technology featuring the PIC18 architecture optimized for motor control and power conversion applications. It offers 8KB (4K x 16) of Flash program memory, 256 bytes of RAM, and 128 bytes of data EEPROM, operating at up to 40 MHz (10 MIPS). The standout feature is the Power Control PWM module with six PWM outputs and 14-bit resolution, supporting half-bridge, full-bridge, and push-pull drive modes with programmable dead time and auto-shutdown on fault conditions – making it ideal for motor control and power supply designs. Three analog comparators with programmable voltage reference enable over-current protection and zero-crossing detection. A 4-channel 10-bit ADC with 200 Ksps speed handles current sensing and voltage monitoring. Communication is handled by an Enhanced USART with LIN/J2602 support, auto-baud detect, and auto-wake-up. The internal 8 MHz oscillator with 4x PLL eliminates the need for an external crystal in many applications. With its compact 18-pin package, specialized motor control peripherals, and automotive qualification, the PIC18F1330 is a cost-effective solution for space-constrained motor control, LED lighting, power conversion, and automotive applications. Available in PDIP, SOIC, SSOP, and QFN packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC18F1330-I Working Principle

The PIC18F1330 operates on the PIC18 RISC architecture with 16-bit wide instructions and an 8-bit wide data path, delivering 10 MIPS at 40 MHz. The 31-level deep hardware stack supports deeply nested subroutines and interrupts, while the 8 x 8 single-cycle hardware multiplier accelerates mathematical operations for control algorithms. The Power Control PWM (PCPWM) module is the core feature of this device, providing six PWM outputs with 14-bit resolution for motor control and power conversion applications. It supports multiple operating modes including half-bridge, full-bridge, and push-pull configurations, with programmable dead time to prevent shoot-through in bridge circuits. The auto-shutdown feature immediately disables all PWM outputs when a fault condition is detected (via an external fault pin or comparator), providing hardware-level protection for power circuits. The three analog comparators with programmable voltage reference are used for current limit detection, over-voltage protection, and zero-crossing detection. The 10-bit ADC with 200 Ksps conversion rate provides fast analog signal acquisition for current sensing and voltage monitoring, essential for closed-loop control systems. The EUSART module supports LIN/J2602 protocol with auto-baud detection and auto-wake-up on Start bit, enabling automotive LIN bus connectivity and low-power wake-up from Sleep mode. The internal 8 MHz oscillator with 4x PLL provides a complete clock solution without external crystals. Power management includes Run, Idle, and Sleep modes for optimizing power consumption based on application requirements.

Pin Description: PIC18F1330-I Pin Definition and Functions
Pin (PDIP-18/SOIC-18) Name Type Function
1 MCLR/VPP/RA5/FLTA I/P Master Clear / VPP / Port A I/O / PWM Fault Input
2 RA0/AN0/INT0/KBI0/CMP0 I/O Port A I/O / ADC0 / Ext Int0 / KBI0 / Comparator 0
3 RA1/AN1/INT1/KBI1 I/O Port A I/O / ADC1 / Ext Int1 / KBI1
4 RA4/T0CKI/AN2/VREF+ I/O Port A I/O / T0CKI / ADC2 / Vref+
5 VSS/AVSS P Ground / Analog Ground
6 RA2/TX/CK I/O Port A I/O / EUSART TX/Clock
7 RA3/RX/DT I/O Port A I/O / EUSART RX/Data
8 RB0/PWM0 I/O Port B I/O / PWM Output 0
9 RB1/PWM1 I/O Port B I/O / PWM Output 1
10 RB2/PWM2 I/O Port B I/O / PWM Output 2
11 RB3/INT3/KBI3/CMP1/T1OSI I/O Port B I/O / Ext Int3 / KBI3 / Cmp1 / T1OSI
12 RB4/PWM3 I/O Port B I/O / PWM Output 3
13 RB5/PWM4/PGC I/O Port B I/O / PWM4 / ICSP Clock
14 RB6/PWM5/PGD I/O Port B I/O / PWM5 / ICSP Data
15 RB7/PGM I/O Port B I/O / Low-Voltage Programming
16 RA7/OSC1/CLKI/T1OSI/FLTA I Osc1 / Clock In / T1OSI / Fault A
17 RA6/OSC2/CLKO/T1OSO/T1CKI/AN3 O Osc2 / Clock Out / T1OSO / T1CKI / ADC3
18 VDD/AVDD P Supply Voltage / Analog Supply
Application Scenarios: In which products and applications is PIC18F1330-I used
  • BLDC and brushed DC motor controllers
  • Switch-mode power supplies and DC-DC converters
  • LED lighting drivers and electronic ballasts
  • Automotive actuators and fan controllers
  • Battery chargers and power management modules
  • Small industrial pump and fan drives
  • Appliance motor control (white goods)
Alternative Models: What chips are recommended as replacements for PIC18F1330-I
Manufacturer Part Number Package Notes
Microchip PIC18F1230-I 18-pin 4KB Flash, 128B RAM, same peripherals, lower cost
Microchip PIC18F2331-I 28-pin 8KB Flash, 768B RAM, QEI, more PWM, 28-pin
Microchip PIC18F2431-I 28-pin 16KB Flash, 768B RAM, QEI, full featured
Microchip PIC18LF1330-I 18-pin Low-voltage version, 2.0-5.5V
Microchip dsPIC30F2010-I 28-pin 16-bit DSC, motor control optimized, DSP engine

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1