Opens in a new tab

STM32F207VET6

ARM Cortex-M3 MCU at 120MHz with 512KB Flash, 132KB SRAM, Ethernet, USB OTG HS/FS, CAN, and camera interface in LQFP-100 package.

8247

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F207VET6

Package:

LQFP-100

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F207VET6 is a high-performance 32-bit microcontroller from STMicroelectronics, featuring an ARM Cortex-M3 32-bit RISC operating at up to 120 MHz. It integrates 512 KB of Flash memory and 132 KB (128KB system + 4KB backup) of SRAM. Housed in a LQFP-100 package with 82 I/O pins, this MCU offers an excellent balance of performance, peripheral integration, and power efficiency. The device operates from 1.8V to 3.6V and supports industrial temperature range of -40°C to +85°C.

Key Specifications

Core ARM Cortex-M3 32-bit RISC
Maximum Frequency 120 MHz
Flash Memory 512 KB
SRAM 132 KB (128KB system + 4KB backup)
Package LQFP-100
Operating Voltage 1.8V to 3.6V
Operating Temperature -40°C to +85°C
I/O Pins 82
3x 12-bit ADC up to 24 channels, 6 MSPS triple interleaved
DAC 2x 12-bit
DMA 16-stream controller with FIFOs and burst support
Timers Up to 17 (12x 16-bit + 2x 32-bit + WDT + SysTick)
USART/UART 4x USART + 2x UART
SPI/I2S 3x SPI, 2 with muxed I2S
I2C 3x
CAN 2x CAN 2.0B Active
Ethernet 10/100 MAC with IEEE 1588v2 hardware
USB USB OTG FS + USB OTG HS with ULPI
Other Peripherals SDIO + Camera Interface + FSMC + CRC + 96-bit UID
Performance 150 DMIPS / 1.25 DMIPS/MHz

Features

  • High-performance ARM core with FPU and DSP instructions
  • ART Accelerator enabling 0-wait state execution from Flash memory
  • Rich set of analog peripherals including high-speed ADC(s) and DAC(s)
  • DMA controller for autonomous data transfers
  • Advanced timers including PWM motor control and watchdog timers
  • Multiple communication interfaces: I2C, USART, SPI/I2S
  • Low-power modes: Sleep, Stop, Standby with VBAT support
  • CRC calculation unit and unique device ID
  • Industrial temperature range and RoHS compliant

Applications

  • Industrial automation and control systems
  • IoT gateways and edge computing devices
  • Motor control and drive systems
  • Human-machine interface (HMI) and touch panels
  • Consumer electronics and smart accessories
  • Medical devices and instrumentation
  • Building automation and smart home
  • Communication equipment and networking
  • Automotive electronics (where applicable)
  • Battery-powered and portable devices
Product Introduction: STM32F207VET6 Product Introduction

The STM32F207VET6 is a high-performance microcontroller from STMicroelectronics, built on the ARM Cortex-M3 32-bit RISC operating at up to 120 MHz. It integrates 512 KB of Flash memory and 132 KB (128KB system + 4KB backup) of SRAM, providing ample resources for complex embedded applications. The device features up to 24 channels, 6 MSPS triple interleaved, along with comprehensive communication interfaces including 3x, 4x USART + 2x UART, and 3x SPI, 2 with muxed I2S. Additional connectivity includes CAN interface, Ethernet MAC, USB OTG. Housed in a LQFP-100 package with 82 I/O pins, the STM32F207VET6 operates from 1.8V to 3.6V supply voltage across the -40°C to +85°C industrial temperature range. It is ideal for a wide range of applications including industrial control, IoT devices, motor drives, consumer electronics, and automotive systems (where applicable).

Working Principle: STM32F207VET6 Working Principle

The STM32F207VET6 operates on the ARM Cortex-M3 32-bit RISC architecture with an advanced pipeline design. The core runs at up to 120 MHz with a nested vectored interrupt controller (NVIC) for low-latency interrupt handling. The multi-layer bus matrix connects the core, DMA controllers, and peripherals to memory resources, enabling parallel data transfers without CPU intervention. The DMA controller handles data transfers between peripherals and memory autonomously, freeing the CPU for application processing. The analog subsystem includes high-speed ADC(s) with multiple channels and DMA support. Power management is achieved through multiple low-power modes including Sleep, Stop, and Standby, with progressive power reduction. The integrated voltage regulator operates in various modes depending on system state. The VBAT pin maintains RTC operation and backup register contents during main power loss. The device supports multiple boot options including user Flash, system memory bootloader, and embedded SRAM, depending on BOOT pin configuration.

Pin Description: STM32F207VET6 Pin Definition and Functions
Pin Group Type Function
VDD (multiple) Power Main power supply
VSS (multiple) Ground Ground
VDDA Power Analog power supply for ADC/DAC
VSSA Ground Analog ground
VBAT Power Battery backup for RTC and backup registers
NRST I/O Active-low reset
PA13 I/O SWDIO (Serial Wire Debug Data I/O)
PA14 I/O SWCLK (Serial Wire Debug Clock)
PA9/PA10 I/O USART1_TX/RX / I2C1 pins
PA2/PA3 I/O USART2_TX/RX / ADC channels
PA5/PA6/PA7 I/O SPI1_SCK/MISO/MOSI / ADC channels
PA0 I/O ADC_IN0 / WKUP1 / TIM2_CH1
PC13 I/O GPIO / TAMPER / RTC_OUT
PC14/PC15 I/O LSE oscillator pins / GPIO
PH0/PH1 I/O HSE oscillator pins
Total I/O – Up to 82 I/O pins, most 5V tolerant
Application Scenarios: In which products and applications is STM32F207VET6 used
  • Industrial automation and control systems
  • IoT gateways and edge computing devices
  • Motor control and drive systems
  • Human-machine interface (HMI) and touch panels
  • Consumer electronics and smart accessories
  • Medical devices and instrumentation
  • Building automation and smart home
  • Communication equipment and networking
  • Automotive electronics (where applicable)
  • Battery-powered and portable devices
Alternative Models: What chips are recommended as replacements for STM32F207VET6
Model Manufacturer Key Difference
STM32F205VET6 STMicroelectronics Same core/Flash/RAM, no Ethernet or camera interface
STM32F207VGT6 STMicroelectronics 1MB Flash (double), same package and peripherals
STM32F407VET6 STMicroelectronics Cortex-M4F at 168MHz, DSP/FPU, 192KB SRAM
STM32F107VCT6 STMicroelectronics Cortex-M3 at 72MHz, 256KB Flash, entry-level with Ethernet
GD32F207VET6 GigaDevice Pin-compatible alternative, 120MHz Cortex-M3

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1