Opens in a new tab

STM32L071CZT6

Ultra-low-power ARM Cortex-M0+ MCU, 32MHz, 192KB Flash, 20KB RAM, 6KB EEPROM, LQFP48

8420

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L071CZT6

Package:

LQFP-48 (7x7x1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L071CZT6 is an ultra-low-power ARM Cortex-M0+ microcontroller from STMicroelectronics, part of the STM32L0 access line family. Operating at up to 32 MHz, it features 192 Kbytes of Flash memory, 20 Kbytes of SRAM, and 6 Kbytes of data EEPROM in an LQFP48 package. This device is optimized for battery-powered and energy-harvesting applications with its comprehensive set of power-saving modes and flexible clocking architecture.

Key Specifications

Core ARM Cortex-M0+ 32-bit
Maximum Frequency 32 MHz
Flash Memory 192 KB (with ECC)
RAM 20 KB
EEPROM 6 KB
Supply Voltage 1.65 V to 3.6 V
Operating Temperature -40°C to +85°C
GPIO Count 37 (up to 40)
ADC 12-bit, 13 channels, 1.14 Msps
Package LQFP-48 (7×7 mm)

Features

  • Ultra-low-power platform: 0.29 uA Standby mode, 0.43 uA Stop mode
  • 93 uA/MHz in Run mode with 5 us wakeup time
  • ARM Cortex-M0+ core with MPU, 0.95 DMIPS/MHz
  • 12-bit ADC 1.14 Msps with hardware oversampling
  • 2x ultra-low-power comparators
  • 7-channel DMA controller
  • 10x communication interfaces: 4x USART, 1x LPUART, 3x I2C, 2x SPI
  • 11x timers including LPTIM, RTC, watchdogs
  • CRC calculation unit, 96-bit unique ID
  • Brown-out reset, POR/PDR, programmable voltage detector

Applications

  • Smart meters (gas/water/heat)
  • Healthcare and fitness devices
  • Wireless sensor networks
  • IoT and battery-powered devices
  • Industrial control and monitoring
  • Wearable electronics
Product Introduction: STM32L071CZT6 Product Introduction

The STM32L071CZT6 is an ultra-low-power microcontroller based on the high-performance ARM Cortex-M0+ 32-bit RISC core operating at a 32 MHz frequency. It incorporates a memory protection unit (MPU), high-speed embedded memories including 192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM, plus an extensive range of enhanced I/Os and peripherals. The device provides high power efficiency achieved through a large choice of internal and external clock sources, internal voltage adaptation and several low-power modes. It offers a 12-bit ADC with hardware oversampling, two ultra-low-power comparators, multiple timers, and rich communication interfaces including I2C, SPI, USART, and LPUART.

Working Principle: STM32L071CZT6 Working Principle

The STM32L071CZT6 operates on the ARM Cortex-M0+ core with a 3-stage pipeline, delivering 0.95 DMIPS/MHz. The ultra-low-power architecture features multiple power modes: Run mode at 93 uA/MHz, Stop mode at 0.43 uA with 16 wakeup lines, and Standby mode at 0.29 uA. The internal voltage regulator dynamically adjusts based on performance requirements. Clock sources include a 16 MHz factory-trimmed RC, 37 kHz low-power RC, and external crystal oscillators. The device uses a 7-channel DMA controller to offload data transfer from the CPU, supporting ADC, SPI, I2C, USART, and timer peripherals for efficient low-power operation.

Pin Description: STM32L071CZT6 Pin Definition and Functions
Pin Name Type Description
PA0-PA15 I/O Port A – 16 GPIO pins with multiple alternate functions
PB0-PB11 I/O Port B – 12 GPIO pins with 5V tolerance
PC0-PC15 I/O Port C – 16 GPIO pins including wakeup capability
NRST I Reset pin – active low
VDDA P Analog power supply (1.65V to 3.6V)
VSSA P Analog ground
VDD P Digital power supply
VSS P Digital ground
BOOT0 I Boot mode selection
OSC_IN/OSC_OUT I/O High speed external crystal oscillator
SWDIO/SWCLK I/O Serial wire debug interface
Application Scenarios: In which products and applications is STM32L071CZT6 used
  • Smart meters (gas, water, heat) and industrial sensors
  • Healthcare and fitness equipment
  • Remote control and user interfaces
  • PC peripherals, gaming, and GPS equipment
  • Alarm systems, wired and wireless sensors
  • Battery-powered IoT edge devices
  • Energy harvesting applications
  • Wearable technology
Alternative Models: What chips are recommended as replacements for STM32L071CZT6
Model Flash Package Description
STM32L071CBT6 128KB LQFP48 Same family, smaller Flash memory
STM32L071KZT6 192KB LQFP32 Same memory, smaller package
STM32L071RZT6 192KB LQFP64 Same memory, more I/O pins
STM32L072CZT6 192KB LQFP48 USB crystal-less, LCD controller
STM32L051C8T6 64KB LQFP48 Lower cost variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1