Opens in a new tab

STM8L101F3U6

Ultra-low-power 8-bit STM8 MCU, 16MHz, 8KB Flash, 1.5KB RAM, 2KB EEPROM, UFQFPN20

12380

Effective Inventory

Image for reference only

Manufacturer Part:

STM8L101F3U6

Package:

UFQFPN-20 (3x3x0.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM8L101F3U6 is an entry-level ultra-low-power 8-bit microcontroller from STMicroelectronics’ STM8L family. Built around the enhanced STM8 CPU core with up to 16 MIPS throughput at 16 MHz, it features 8 KB of Flash program memory including up to 2 KB of data EEPROM with ECC, 1.5 KB of SRAM, and a comprehensive peripheral set in a compact UFQFPN20 package. The device offers industry-leading low-power performance with Halt mode current as low as 0.3 uA, making it ideal for battery-powered and energy-harvesting applications where power efficiency is critical.

Key Specifications

Core STM8 8-bit CISC
Maximum Frequency 16 MHz
Flash Memory 8 KB (with ECC)
RAM 1.5 KB
EEPROM 2 KB (data EEPROM)
Supply Voltage 1.65 V to 3.6 V
Operating Temperature -40°C to +85°C
GPIO Count 18
Timers 2x 16-bit + 1x 8-bit
Package UFQFPN-20 (3×3 mm)

Features

  • Ultra-low power: 0.3 uA Halt, 0.8 uA Active-halt, 150 uA/MHz Run
  • Enhanced STM8 core with 16 MIPS throughput
  • 8 KB Flash with ECC + 2 KB data EEPROM
  • Three low-power modes: Wait, Active-halt, Halt
  • Fast 4 us wakeup from internal 16 MHz RC
  • 2x 16-bit general purpose timers (TIM2/TIM3)
  • 1x 8-bit basic timer (TIM4) with 7-bit prescaler
  • Infrared remote control (IR) interface
  • Independent watchdog, auto-wakeup unit, beeper
  • SPI, fast I2C (400 kHz), USART
  • 2x comparators with 4 inputs each
  • 96-bit unique ID, SWIM debug interface

Applications

  • Low-power sensor networks
  • Remote controls and keypads
  • Battery-powered IoT devices
  • Smart home automation nodes
  • Wearable electronics
  • Industrial monitoring sensors
  • Portable measurement devices
Product Introduction: STM8L101F3U6 Product Introduction

The STM8L101F3U6 is an ultra-low-power 8-bit microcontroller from STMicroelectronics, featuring the enhanced STM8 CPU core providing up to 16 MIPS throughput at 16 MHz. It includes 8 Kbytes of Flash program memory with up to 2 Kbytes of data EEPROM, 1.5 Kbytes of static RAM, and a rich set of peripherals including two 16-bit general purpose timers, one 8-bit timer, infrared interface, SPI, I2C, and USART. The device operates from 1.65 V to 3.6 V supply voltage and offers three low-power modes: Wait, Active-halt, and Halt with current as low as 0.3 uA. Packaged in UFQFPN20, it is ideal for space-constrained battery-powered applications.

Working Principle: STM8L101F3U6 Working Principle

The STM8L101F3U6 uses an enhanced STM8 8-bit core with CISC architecture, 3-stage pipeline, and 20 addressing modes delivering up to 16 MIPS. The ultra-low-power design features an internal voltage regulator with main and low-power modes that automatically switch based on operating mode. Clock management includes an internal 16 MHz RC (4 us fast wakeup) and a 38 kHz low-power RC driving the independent watchdog and auto-wakeup unit. Three power-saving modes progressively reduce power consumption: Wait mode (CPU stopped, peripherals active), Active-halt (0.8 uA with AWU), and Halt (0.3 uA, wakeup via external interrupt). The nested interrupt controller supports 3 software priority levels with up to 29 external interrupt sources.

Pin Description: STM8L101F3U6 Pin Definition and Functions
Pin Name Type Description
PA0 I/O HS/SWIM/BEEP/IR_TIM (Pin 1)
PA1 I/O OSCIN (Pin 2)
PA2 I/O OSCOUT (Pin 3)
PA3 I/O GPIO (Pin 5)
PB0 I/O GPIO / ADC ch0 (Pin 6)
PB1 I/O GPIO / ADC ch1 (Pin 7)
PB2 I/O GPIO / ADC ch2 (Pin 8)
PB3 I/O GPIO / ADC ch3 (Pin 9)
PB4 I/O GPIO / I2C_SDA (Pin 10)
PB5 I/O GPIO / I2C_SCL (Pin 11)
PC0 I/O GPIO / SPI_SCK (Pin 13)
PC1 I/O GPIO / SPI_MOSI (Pin 14)
PC2 I/O GPIO / SPI_MISO (Pin 15)
PC2 I/O GPIO / SPI_MISO (Pin 15)
PC3 I/O HS / USART_TX (Pin 16)
PC4 I/O HS / USART_RX (Pin 17)
PC5 I/O HS / USART_CK / CCO (Pin 18)
NRST I Reset (Pin 4)
VDD P Power supply (Pin 12)
VSS P Ground (Pin 19, EPAD Pin 20)
Application Scenarios: In which products and applications is STM8L101F3U6 used
  • Low-power sensor nodes and data loggers
  • Battery-powered remote controls
  • Smart home and building automation
  • Wearable devices and accessories
  • Industrial monitoring and control
  • Portable instrumentation
Alternative Models: What chips are recommended as replacements for STM8L101F3U6
Model Flash Package Description
STM8L101F3P6 8KB TSSOP20 Same memory, through-hole friendly
STM8L101G3 8KB TSSOP28 More I/O pins
STM8L101K3 8KB LQFP32 Maximum I/O count
STM8L101F2 4KB UFQFPN20 Lower cost, smaller Flash
STM8S003F3 8KB UFQFPN20 Value line, wider voltage (2.95-5.5V)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1