Opens in a new tab

TDA10046HT

Single-chip DVB-T channel decoder, COFDM demodulator, 10-bit ADC, transport stream output, TQFP64

2850

Effective Inventory

Image for reference only

Manufacturer Part:

TDA10046HT

Package:

TQFP-64 (10 x 10 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TDA10046HT is a single-chip DVB-T channel decoder from NXP Semiconductors (originally Philips Semiconductors), delivering a complete COFDM demodulation solution for digital terrestrial television reception. Fully compliant with ETS 300-744 DVB-T standard, it supports both 2K and 8K transmission modes with all modulation schemes including QPSK, 16QAM, and 64QAM. The device integrates a 10-bit ADC, dual AGC loops, digital adjacent channel filtering, FFT demodulation, channel estimation and equalization, error correction (FEC), and transport stream output in a single TQFP64 package. Fabricated in 0.18 µm CMOS technology, it consumes only 450 mW while providing industry-leading reception performance through advanced features such as adaptive echo cancellation, the proprietary ‘Pulse Killer’ impulsive noise reduction algorithm, and fast channel scanning. Both parallel and serial transport stream interfaces are provided simultaneously, enabling flexible system integration with MPEG decoders and other downstream processing devices.

Key Specifications

Standard Compliance ETSI EN 300 744 (DVB-T)
Transmission Modes 2K and 8K COFDM
Modulation QPSK, 16QAM, 64QAM
Guard Intervals 1/32, 1/16, 1/8, 1/4
Code Rates 1/2, 2/3, 3/4, 5/6, 7/8
Analog Input 1st or 2nd IF (10-bit on-chip ADC)
AGC Dual loop (IF + RF), programmable takeover point
Transport Stream Parallel (8-bit) + serial (tri-state capable)
Clock Reference 4 MHz crystal oscillator
Control Interface I2C-bus
GPIO 4 pins with ΣΔ modulator
I/O Voltage 5 V tolerant
Power Consumption 450 mW typical
Technology 0.18 µm CMOS
Operating Temperature 0°C to +70°C
Package TQFP-64 (10 x 10 mm)

Features

  • 2K and 8K COFDM demodulator, fully ETS 300-744 compliant
  • On-chip 10-bit ADC and PLL for 1st/2nd IF input
  • Dual AGC loop (IF + RF) with programmable takeover point
  • Adjacent channel digital filtering (only one SAW filter required)
  • Automatic frequency offset detection (±1, 2, 3 standard offsets)
  • Dynamic FFT window positioning and adaptive echo equalization
  • ‘Pulse Killer’ algorithm for impulsive noise reduction
  • DSP-based synchronization with firmware upgrade capability
  • Ultra-fast UHF/VHF band scanning
  • Tri-state parallel and serial transport stream interfaces
  • 4 GPIO pins with ΣΔ modulator
  • I2C-bus control interface
  • 5 V tolerant I/O pins
  • Low power consumption: 450 mW
  • TQFP64 package, 0.18 µm CMOS technology

Applications

  • Integrated digital televisions (iDTV)
  • Digital terrestrial set-top boxes (STB)
  • Personal video recorders (PVR) with DVB-T reception
  • PC TV cards and USB TV tuner adapters
  • Portable and handheld TV devices
  • Automotive digital TV receivers
  • DVB-T over IP gateways and streaming
  • Digital signage and public information displays
  • Education and test equipment for DVB-T
Product Introduction: TDA10046HT Product Introduction

The TDA10046HT is a single-chip DVB-T channel decoder from NXP Semiconductors (formerly Philips Semiconductors), providing a complete COFDM demodulation solution for digital terrestrial television reception. It supports both 2K and 8K transmission modes fully compliant with the ETS 300-744 DVB-T standard. The device integrates a 10-bit analog-to-digital converter and PLL, accepting either 1st or 2nd IF analog input, and performs all channel decoding functions from IF input to transport stream output using an internal DSP core for synchronization and control. Key features include dual AGC loops with programmable takeover point, adjacent channel digital filtering (requiring only one external SAW filter), automatic frequency offset detection, adaptive echo equalization, and a proprietary ‘Pulse Killer’ algorithm for impulsive noise reduction. Packaged in a TQFP64 and fabricated in 0.18µm CMOS technology, it delivers excellent DVB-T reception performance while consuming only 450 mW of power.

Working Principle: TDA10046HT Working Principle

The TDA10046HT performs all DVB-T channel decoding functions in a single chip, from analog IF input to digital transport stream output. The incoming IF signal is sampled by an on-chip 10-bit ADC, then digitally converted to baseband and passed through an adjacent channel interference (ACI) filter to attenuate neighboring channels. The COFDM demodulator performs FFT-based demodulation, with dynamic FFT window positioning and time/frequency domain channel estimation for adaptive echo equalization. A common phase error correction block compensates for tuner phase noise. The DSP-based synchronization engine enables firmware upgrades and provides features like fully automatic transmission parameter detection and ultra-fast UHF/VHF band scanning. The ‘Pulse Killer’ algorithm detects and removes short, strong impulsive noise interference caused by electrical equipment or automotive systems. The output is a standard MPEG-2 transport stream available on both parallel and serial interfaces simultaneously. An I2C-bus interface allows host processor control and status monitoring, with 4 GPIO pins featuring sigma-delta modulators for auxiliary functions.

Pin Description: TDA10046HT Pin Definition and Functions
Pin Group Description
Analog IF Input 1st or 2nd IF analog input pin (ADC input)
Transport Stream Output Parallel (8-bit) and serial transport stream outputs, tri-state capable
AGC Outputs IF AGC and RF AGC (optional) control outputs for tuner
Clock / Oscillator 4 MHz crystal oscillator interface (XO/XI pins)
I2C Bus SDA, SCL for register control and status readout
GPIO 4 general-purpose I/O pins with ΣΔ modulator
Power Pins Digital core supply, I/O supply, analog supply pins
Ground Pins Multiple ground pins for digital, analog, and PLL sections
JTAG / Test JTAG boundary scan interface pins
Control Pins Reset, standby, and other control signals

Package: TQFP-64 (10 x 10 mm, 0.5 mm pitch), 0.18 µm CMOS technology.

Application Scenarios: In which products and applications is TDA10046HT used
  • Integrated digital televisions (iDTV)
  • Digital terrestrial set-top boxes (STB)
  • Personal video recorders (PVR) with DVB-T
  • PC TV cards and USB TV tuners
  • Portable TV devices and handheld receivers
  • Automotive digital TV receivers
  • DVB-T to IP gateways
  • Digital signage and public displays
Alternative Models: What chips are recommended as replacements for TDA10046HT
Model Manufacturer Standard Description
TDA10048HT NXP DVB-T Newer generation, higher performance
TDA10023 NXP DVB-T/C Dual DVB-T and DVB-C demodulator
MT352 Zarlink DVB-T Alternative DVB-T demodulator
ATBM8869 AltoBeam DVB-T/T2 Chinese DVB-T/T2 alternative
RDA5880 锐迪科 DVB-T Low-cost DVB-T demodulator

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1