Opens in a new tab

TH8055JDC

Single-wire CAN transceiver, 5-18V, 33kbps normal/83kbps high-speed, sleep mode 30µA, SOIC8, Melexis

5700

Effective Inventory

Image for reference only

Manufacturer Part:

TH8055JDC

Package:

SOIC-8 (3.9 mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TH8055JDC is a single-wire CAN bus transceiver from Melexis Technologies, designed for Class B in-vehicle communication networks and other low-speed, cost-sensitive applications. It provides the physical layer interface between a CAN protocol controller and a single-wire data bus, operating with the Bosch CAN 2.0 protocol at typical speeds of 33 kbit/s (normal mode) and up to 83 kbit/s (high-speed download mode). Compliant with SAE J2411 and GMW3089 V1.26 specifications, it is pin-compatible with the NXP AU5790 transceiver. The device operates from a 5 V to 18 V supply and features an extremely low 30 µA sleep mode current with selective bus wake-up capability. Built for harsh automotive environments, it provides robust protection against load dump, jump start, ISO 7637 transients (±200 V), short-circuits, loss of ground, and thermal overload. With wave-shaped output drivers for low RFI and integrated receiver filtering, the TH8055JDC in an SOIC-8 package offers a compact and reliable solution for single-wire CAN networking.

Key Specifications

Protocol / Standard SAE J2411 / GMW3089 V1.26 (Single-Wire CAN)
Type Single-wire CAN transceiver (physical layer)
Data Rate (Normal) 33 kbit/s typical
Data Rate (High-Speed) Up to 83-100 kbit/s
Supply Voltage (VBAT) 5 V to 18 V operating
Supply Voltage (Load Dump) 40 V (t < 500 ms)
Supply Voltage (Jump Start) 27 V (t < 1 min)
Sleep Mode Current 30 µA typical
Operating Modes Sleep, Normal, High-Speed, Wake-up
Bus Transient Rating ±200 V (ISO 7637)
Bus ESD Protection 4 kV HBM (CAN pin)
Other Pins ESD 2 kV HBM
Undervoltage Lockout Yes
Bus Dominant Timeout Yes
Thermal Protection Yes (thermal shutdown)
Loss of Ground Protection Yes
Pin Compatibility AU5790 (NXP)
Operating Temperature -40°C to +125°C
Package SOIC-8 (3.9 mm width)

Features

  • Single-wire CAN transceiver, fully SAE J2411 compliant
  • 33 kbit/s normal mode, up to 83 kbit/s high-speed mode
  • 30 µA typical sleep mode current (independent of CAN voltage)
  • 5 V to 18 V operating voltage range
  • Selective bus wake-up capability
  • Low RFI due to output wave shaping
  • Fully integrated receiver filter
  • Bus pins proof against short-circuits and automotive transients
  • Loss of ground protection
  • Load dump (40 V) and jump start (27 V) protection
  • ISO 7637 transient protection (±200 V)
  • Thermal overload and short-circuit protection
  • 4 kV ESD on CAN pin, 2 kV on other pins
  • Undervoltage lockout (UVLO)
  • Bus dominant timeout feature
  • Output blanking during bus ringing
  • Pin-compatible with NXP AU5790
  • SOIC-8 surface mount package
  • AEC-Q100 qualified (automotive grade)

Applications

  • Automotive body electronics (Class B networks)
  • Door modules and window lift controls
  • Seat adjustment systems
  • Climate control modules
  • Lighting control systems
  • Industrial single-wire CAN networks
  • Low-cost sensor bus networks
  • Off-road vehicle communication systems
  • General-purpose low-speed data links
  • Aftermarket automotive electronics
Product Introduction: TH8055JDC Product Introduction

The TH8055JDC is a single-wire CAN transceiver from Melexis Technologies, designed for Class B in-vehicle communications and other low-speed, cost-sensitive networking applications. It serves as the physical layer interface between a CAN protocol controller and a single-wire bus, operating with CAN 2.0 protocol at typical data rates of 33 kbit/s (normal mode) and up to 83 kbit/s (high-speed download mode). Designed per the GMW3089 V1.26 Single Wire CAN Physical Layer Specification, it supports the SAE J2411 standard and is pin-compatible with the NXP AU5790. Key features include a very low 30 µA sleep mode current, undervoltage lockout, bus dominant timeout protection, output blanking during bus ringing, and loss of ground protection. With robust protection against load dump (40 V), jump start (27 V), and automotive transients up to ±200 V per ISO 7637, the TH8055JDC is well-suited for harsh automotive and industrial environments. The device is packaged in an SOIC-8 surface-mount package.

Working Principle: TH8055JDC Working Principle

The TH8055JDC operates as a single-wire CAN physical layer transceiver, translating CAN controller logic-level signals to and from the single-wire bus. In normal operation, the transmitter drives the bus to a high voltage level (around Vbat – 1 V) for dominant state and lets it float to ground via the bus termination for recessive state. The receiver detects the bus voltage and converts it back to digital logic levels compatible with the CAN controller. The device supports two speed modes: normal mode at ~33 kbit/s for regular communication, and high-speed mode at ~83 kbit/s for assembly line programming or service data download, activated via the MODE pins. Sleep mode reduces current consumption to just 30 µA while maintaining bus wake-up detection capability. Built-in safety features include undervoltage lockout (disabling the transceiver if VBAT drops too low), bus dominant timeout (preventing a stuck-dominant fault from bringing down the entire bus), output blanking during bus ringing to avoid false recessive/dominant transitions, and thermal overload protection. The wave-shaped output driver minimizes electromagnetic interference (RFI/EMI).

Pin Description: TH8055JDC Pin Definition and Functions
Pin No. Symbol Type Description
1 TXD I Transmit data input (from CAN controller, low = dominant)
2 GND P Ground
3 MODE0 I Mode select input 0 (controls operating mode)
4 MODE1 I Mode select input 1 (controls operating mode)
5 RXD O Receive data output (to CAN controller)
6 CAN I/O Single-wire CAN bus connection
7 VBAT P Battery supply voltage (5 V to 18 V operating)
8 LOAD I/O Bus load pin (for high-speed mode external load)

Mode Truth Table (MOD1, MOD0):

  • 0, 0 → Sleep mode (low power, wake on bus)
  • 0, 1 → High-speed mode (83 kbps)
  • 1, 0 → Normal mode (33 kbps)
  • 1, 1 → Wake up / detect wakeup
Application Scenarios: In which products and applications is TH8055JDC used
  • Automotive body electronics (Class B networks)
  • Door modules and window lift controls
  • Seat adjustment and climate control
  • Lighting control modules
  • Industrial single-wire CAN networks
  • Low-cost sensor networks
  • Off-road vehicle systems
  • General-purpose low-speed data links
Alternative Models: What chips are recommended as replacements for TH8055JDC
Model Manufacturer Type Description
TH8056 Melexis SWCAN Newer version, GMW3089 V2.3, INH pin
NCV7356 onsemi SWCAN Pin-compatible alternative
AU5790 NXP SWCAN Original single-wire CAN transceiver
MC33390 onsemi SWCAN Single-wire CAN, SOIC8
SN65HVDA100 TI SWCAN TI single-wire CAN transceiver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1