Product Overview
The TPS70351PWPR is a dual-channel low-dropout (LDO) voltage regulator with integrated supervisory circuits from Texas Instruments, designed specifically to power TI TMS320 DSPs and other multi-rail embedded processors. The device provides two independently controlled LDO outputs and includes a power-on reset supervisor, undervoltage monitoring, and manual reset input for complete power management and system reset control in a single package.
Packaged in a 24-pin HTSSOP (PWP) package measuring 7.8 mm × 4.4 mm with 0.65 mm pitch, the TPS70351 operates from a single 3 V to 5.5 V input supply. The dual regulators produce fixed output voltages of 3.3 V (Reg1) and 1.8 V / 2.5 V (Reg2, selectable), each with a maximum output current of 1 A. The device features a sequential power-up capability where Reg2 turns on after Reg1 reaches regulation, satisfying the power-up sequencing requirements of many DSP and processor cores.
Integrated supervisory features include a power-on reset (RESET) output with programmable delay, a manual reset input (/MR), an open-drain power-good output, and undervoltage sensing on both outputs. The device also offers a thermal shutdown protection circuit and reverse battery protection. Operating over the temperature range of –40°C to +125°C, the TPS70351PWPR is suitable for industrial, communications, and computing applications requiring a compact, integrated power solution.
Key Specifications
| Parameter | Regulator 1 | Regulator 2 |
|---|---|---|
| Input Voltage Range | 3.0 V to 5.5 V (single supply) | |
| Output Voltage | 3.3 V (fixed) | 1.8 V / 2.5 V (selectable via SEL pin) |
| Output Current | 1 A | 1 A |
| Dropout Voltage | 220 mV @ 1 A | 200 mV @ 1 A |
| Output Accuracy | ±2% (over temperature) | |
| Quiescent Current | 1.5 mA typical (both enabled) | |
| PSRR | 60 dB typical @ 1 kHz | |
| Enable/Sequence | Independent EN1 | EN2 + auto-sequencing option |
| Supervisor Features | Power-on reset, manual reset, power-good, UV monitor | |
| Package | HTSSOP-24 (PWP), 7.8 x 4.4 mm | |
| Operating Temperature | –40°C to +125°C | |
Features
- Dual LDO regulators: 3.3 V/1 A + 1.8 V or 2.5 V/1 A
- Low dropout: 220 mV at 1 A (Reg1), 200 mV at 1 A (Reg2)
- Single input supply: 3.0 V to 5.5 V
- Selectable Reg2 output (1.8 V or 2.5 V) via SEL pin
- Programmable power-up sequencing (Reg1 then Reg2)
- Power-on reset (RESET) output with 200 ms delay
Manual reset input (/MR) with debounce - Open-drain power-good (PG) output
Undervoltage monitoring on both outputs - Thermal shutdown and overcurrent protection
- Reverse battery protection on VIN
- High PSRR: 60 dB at 1 kHz
- 24-pin HTSSOP package with PowerPAD™ thermal pad
- Industrial temperature range: –40°C to +125°C
- Pin-compatible with TPS703xx family
Applications
- Power supply for DSP, MCU, and FPGA systems
- TI TMS320C6000 and OMAP processor power
- Industrial control and automation equipment
- Telecommunications and networking hardware
- Embedded systems and single-board computers
- Test and measurement instruments
- Medical and healthcare equipment
- Multi-rail supplies requiring power sequencing













