Opens in a new tab

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

15840

Effective Inventory

Image for reference only

Manufacturer Part:

UA78M15HC

Package:

TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UA78M15HC is a fixed-output linear voltage regulator from Texas Instruments, providing a regulated +15 V output from a higher input voltage. This device belongs to the 78Mxx series of medium-current positive regulators, capable of delivering up to 500 mA of output current with excellent line and load regulation characteristics.

Fabricated using a monolithic integrated circuit process, the UA78M15HC incorporates internal current limiting, thermal shutdown, and safe-area protection, making it essentially immune to damage from output overloads or short-circuit conditions. The device operates with an input voltage range of 17.5 V to 35 V, requiring a minimum headroom (dropout voltage) of 2.5 V above the output for proper regulation.

The UA78M15HC is available in a TO-220 through-hole package, making it suitable for a wide range of applications including industrial power supplies, instrumentation, consumer electronics, and automotive subsystems. Its robust thermal design, combined with TI’s proven manufacturing processes, ensures reliable operation over the full industrial temperature range of -40°C to +125°C.

Key Specifications

Parameter Value
Output Voltage +15 V fixed
Output Current 500 mA max
Input Voltage Range 17.5 V to 35 V
Dropout Voltage 2.5 V typical @ 500 mA
Line Regulation 10 mV typical (0.01%)
Load Regulation 10 mV typical (0.067%)
Output Voltage Accuracy ±4% (over line, load, temperature)
Quiescent Current 5 mA typical
Output Noise Voltage 75 µVrms typical (10 Hz to 100 kHz)
Ripple Rejection 70 dB typical @ 120 Hz
Short-Circuit Current Limit 650 mA typical
Junction Temperature Range –40°C to +125°C
Package TO-220 (3-lead)
Thermal Resistance θJA 65°C/W (with PCB heatsink)

Features

  • Fixed +15 V output, 500 mA output current capability
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Output transistor safe-area compensation
  • No external components required for basic operation
  • Excellent line and load regulation
  • High ripple rejection ratio (70 dB typical)
  • Low output noise
  • Available in TO-220 through-hole package
  • Industrial temperature range: –40°C to +125°C
  • Moisture sensitivity level 1 (MSL1)
  • RoHS compliant and halogen-free

Applications

  • Industrial power supplies and distributed power systems
  • Instrumentation and test equipment
  • Operational amplifier power supplies
  • Automotive electronics (post-regulation)
  • Consumer electronics and home appliances
  • Telecommunications equipment
  • Data acquisition systems
  • Motor control and drive circuits
Product Introduction: UA78M15HC Product Introduction

The UA78M15HC is a member of Texas Instruments’ 78Mxx family of fixed-output positive linear voltage regulators. This device provides a precise +15V regulated output from an unregulated DC input, capable of supplying up to 500mA of load current. It is designed for a wide variety of applications where a clean, stable positive supply rail is required.

Manufactured using TI’s advanced bipolar process technology, the UA78M15HC features excellent line and load regulation characteristics, with output voltage accuracy maintained within ±4% over the full range of input voltage, load current, and operating temperature conditions. The device achieves a typical ripple rejection ratio of 70dB, making it effective at suppressing input supply ripple and noise.

A key advantage of the UA78M15HC is its comprehensive built-in protection features. Internal current limiting protects the regulator during output short-circuit conditions by clamping the output current to approximately 650mA. Thermal shutdown circuitry monitors the die temperature and disables the output if the junction temperature exceeds safe limits, preventing damage from excessive power dissipation. Additionally, output transistor safe-area compensation ensures that the pass element operates within its safe operating area under all load and voltage conditions.

The UA78M15HC is housed in a TO-220 package with a metal tab that can be bolted to an external heatsink for improved thermal performance. This through-hole package provides excellent thermal dissipation characteristics and is well-suited for industrial and power supply applications where reliability and thermal performance are critical.

Working Principle: UA78M15HC Working Principle

The UA78M15HC is a series-pass (linear) voltage regulator that operates by continuously adjusting the resistance of a power transistor connected in series between the input and output terminals. The regulation mechanism works through several key functional blocks:

1. Bandgap Reference: A precision bandgap voltage reference generates a stable, temperature-compensated reference voltage of approximately 1.25V. This reference serves as the standard against which the output voltage is compared. The bandgap circuit is designed to have near-zero temperature coefficient by combining transistors with positive and negative temperature coefficients.

2. Error Amplifier: A high-gain differential amplifier compares a fraction of the output voltage (obtained through an internal resistive voltage divider) with the bandgap reference voltage. Any difference between these two voltages generates an error signal that drives the control circuitry.

3. Series Pass Transistor: The error signal controls the base/gate drive of a power transistor connected between the input and output. When the output voltage drops below the regulation setpoint, the error amplifier increases the drive to the pass transistor, reducing its resistance and allowing more current to flow, thus raising the output voltage. Conversely, if the output rises above setpoint, the pass transistor resistance is increased.

4. Voltage Divider Network: Internal precision resistors divide the output voltage down to match the bandgap reference level. For a 15V output, the divider ratio is approximately 12:1. The accuracy and temperature stability of these resistors directly affect output voltage accuracy.

5. Current Limiting: A small sense resistor in series with the output monitors the load current. When the current exceeds the limit threshold (typically 650mA), the current limit circuit reduces the drive to the pass transistor, clamping the output current to a safe level. This protects both the regulator and the load during short-circuit or overload conditions.

6. Thermal Shutdown: An on-chip temperature sensor monitors the junction temperature. If Tj exceeds approximately 150°C, the thermal shutdown circuit disables the pass transistor, turning off the output. The device automatically restarts when the temperature drops below the reset threshold (typically ~125°C), providing thermal cycling protection.

7. Safe-Area Compensation: This circuit dynamically adjusts the current limit based on the input-output voltage differential. At higher voltage drops across the pass transistor, the current limit is reduced to ensure the transistor operates within its safe operating area (SOA), preventing secondary breakdown.

Pin Description: UA78M15HC Pin Definition and Functions
Pin No. Pin Name Type Function
1 INPUT (Vin) Power Input Unregulated DC input voltage. Range: 17.5V to 35V. Bypass with 0.33µF ceramic capacitor to GND, placed close to the pin.
2 GND Ground Ground reference for both input and output. Connect directly to system ground plane.
3 OUTPUT (Vout) Regulated Output Regulated +15V output. Connect a 0.1µF ceramic capacitor close to the pin for stability and transient response improvement.
Tab Tab (GND) Thermal/Ground Metal tab is internally connected to pin 2 (GND). Bolt to heatsink for thermal dissipation. If heatsink is grounded, no isolation needed.

Package: TO-220-3. Three-lead through-hole package with vertical mounting tab. Standard 0.1-inch (2.54mm) lead pitch. Tab is at GND potential (pin 2).

Application Scenarios: In which products and applications is UA78M15HC used
  • Industrial Power Supplies: Local 15V regulation in distributed power systems, providing clean analog supply rails for sensors, signal conditioning circuits, and industrial control modules from a higher-voltage bus.
  • Operational Amplifier Power: Positive supply rail for op-amp circuits in audio equipment, instrumentation amplifiers, active filters, and precision analog circuits where low noise and high PSRR are critical.
  • Automotive Post-Regulation: Secondary regulation stage in automotive electronics, stepping down a 24V or 28V truck/bus supply to 15V for sensors, actuators, and infotainment subsystems.
  • Data Acquisition Systems: Analog supply for ADCs, DACs, and signal conditioning circuits in data acquisition cards, PLC analog modules, and measurement instrumentation requiring stable reference voltages.
  • Test and Measurement Equipment: Power supply regulation in oscilloscopes, multimeters, signal generators, and other benchtop instruments where clean, low-noise rails are essential for measurement accuracy.
  • Motor Control Circuits: Gate drive power supply for MOSFET/IGBT drivers in motor control inverters, servo drives, and power conversion systems requiring isolated or non-isolated 15V gate drive voltage.
  • Telecommunications: Local regulation for telecom line cards, DSL modems, and network equipment powered from 24V or 48V distribution buses, providing 15V for analog front-end circuits.
  • Consumer Electronics: Power regulation in audio amplifiers, CRT displays, home appliances, and other consumer products where a 15V analog or control supply is needed from a higher voltage AC/DC front-end.
Alternative Models: What chips are recommended as replacements for UA78M15HC
Manufacturer Part Number Vout Iout Package Notes
TI LM7815 15V 1.5A TO-220 Higher current, same pinout
TI UA78M05 5V 500mA TO-220/SOIC 5V version, same series
TI UA78M12 12V 500mA TO-220/SOIC 12V version, same series
TI UA79M15 -15V 500mA TO-220 Negative 15V complement
TI LM1117-15 15V 800mA SOT-223 Low dropout, SMD package
Onsemi MC78M15 15V 500mA TO-220/DPAK Direct equivalent, drop-in replacement
STMicro L78M15 15V 500mA TO-220/DPAK Direct equivalent, drop-in replacement

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1