Opens in a new tab

VNI4140K

Quad high-side smart power switch, 4×0.6A, 10.5-36V, 80mΩ Rds(on), PowerSSO-24, ST VIPower, full protection

2180

Effective Inventory

Image for reference only

Manufacturer Part:

VNI4140K

Package:

PowerSSO-24 – 7.5 x 10.4 x 3.5 mm, exposed tab, 1.27mm pitch

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The VNI4140K is a quad high-side smart power solid-state relay from STMicroelectronics, fabricated using the company’s proprietary VIPower™ (Vertical Intelligent Power) technology. This monolithic 4-channel driver integrates both the control logic and four protected power MOSFET outputs on a single chip, providing a compact, reliable solution for driving industrial loads up to 0.6 A per channel.

Packaged in a PowerSSO-24 surface-mount package with exposed thermal tab, the VNI4140K operates from a supply voltage of 10.5 V to 36 V DC, making it ideal for 24 V industrial automation systems. Each channel features active current limiting (0.7 A typical short-circuit limit), independent junction thermal shutdown with automatic restart, and open-drain status/diagnostic outputs for per-channel fault monitoring. The device supports resistive, inductive, and capacitive loads, with built-in fast demagnetization for inductive loads.

The VNI4140K offers a comprehensive set of protection features including undervoltage shutdown with hysteresis, overvoltage clamping (VCC clamp at 41 V typical), loss-of-GND protection, and case-temperature protection with non-simultaneous channel restart to minimize supply current surges. The logic inputs are 3.3 V and 5 V CMOS/TTL compatible. Designed to meet IEC 61131-2, IEC 61000-4-4 (EFT), and IEC 61000-4-5 (surge) standards, with ESD immunity up to ±25 kV per IEC 61000-4-2, the VNI4140K is a robust solution for industrial digital output modules, PLCs, and CNC machines.

Key Specifications

Parameter Value
Number of Channels 4 (quad high-side)
Output Current per Channel 0.6 A nominal (VNI4140K)
Short-Circuit Current Limit 0.7 A typ, 1.7 A max @ 24V
Peak Output Current 1.3 A (dynamic load)
On-Resistance RDS(on) 80 mΩ typ, 140 mΩ max per channel
Supply Voltage Range 10.5 V to 36 V DC
VCC Clamp Voltage 41 V typ, 52 V max (overvoltage)
Supply Current (OFF state) 0.25 mA typical
Supply Current (all ON) 2.4 mA typ, 4 mA max
Undervoltage Shutdown 10.5 V max, 7 V min
Input Logic Compatibility 3.3 V / 5 V CMOS/TTL
Junction Shutdown Temp (TTSD) 170°C typ (150–190°C)
Case Shutdown Temp (TCSD) 130°C typ (125–135°C)
Demagnetization Voltage VCC–41 V to VCC–52 V
Package PowerSSO-24 (exposed tab)
Operating Junction Temp –40°C to +125°C (internally limited)
Standard Compliance IEC 61131-2, IEC 61000-4-2/4/5

Features

  • Quad high-side intelligent power switch (4 channels)
  • 0.6 A nominal output current per channel
  • VIPower™ monolithic technology for high reliability
  • Per-channel short-circuit current limiting
  • Per-channel junction overtemperature protection with auto-restart
  • Case overtemperature protection with non-simultaneous restart
  • Fast demagnetization of inductive loads (VCC–41V clamp)
  • Loss-of-GND protection (output turns off safely)
  • Undervoltage shutdown with hysteresis
  • Overvoltage protection (VCC clamping at ~41V)
  • Per-channel open-drain status (fault) outputs
  • 3.3 V and 5 V CMOS/TTL compatible inputs
  • Very low quiescent current: 250 µA standby
  • Drives all load types: resistive, inductive, capacitive
  • PowerSSO-24 package with exposed thermal tab
  • RoHS compliant, industrial grade
  • 15-year product longevity commitment

Applications

  • Programmable Logic Controllers (PLC) digital output modules
  • Industrial PC peripheral I/O and control
  • Numerical Control (NC/CNC) machine tools
  • Solenoid and valve drivers
  • Relay and contactor coil drivers
  • Industrial lamp and LED drivers
  • Motor control and actuator circuits
  • Factory automation and process control
Product Introduction: VNI4140K Product Introduction

The VNI4140K is a quad channel high-side intelligent power switch (IPS) from STMicroelectronics, built using the company’s VIPower (Vertical Intelligent Power) technology that integrates vertical power MOSFETs with bipolar and CMOS control circuits on a single monolithic die. This integration provides significant advantages in terms of compactness, reliability, and cost-effectiveness compared to discrete solutions.

Designed specifically for industrial applications, the VNI4140K drives four independent loads with one side connected to ground (high-side configuration). Each channel can supply up to 0.6A continuous current, with active current limiting at approximately 0.7A typical during short-circuit conditions, protecting both the load and the device itself.

A key architectural feature is the two-level thermal protection system. Each channel has its own junction temperature sensor that triggers thermal shutdown at approximately 170°C, with automatic restart when the junction cools below the reset threshold (~135°C). Additionally, a global case temperature sensor monitors the package temperature. If the case temperature reaches 130°C due to sustained overload on multiple channels, overloaded channels are shut down and restart non-simultaneously (staggered) to avoid high peak currents on the power supply. Non-overloaded channels continue operating normally.

The device includes comprehensive protection features: undervoltage lockout prevents operation below 10.5V, VCC clamping at 41V provides overvoltage protection, loss-of-ground protection ensures safe behavior if the ground connection is lost, and ESD protection up to ±25kV (IEC 61000-4-2) ensures robustness in industrial environments. The open-drain status pins provide per-channel diagnostic feedback for overtemperature/fault conditions, enabling intelligent monitoring by the system controller.

Packaged in PowerSSO-24 with an exposed thermal tab for efficient heat dissipation, the VNI4140K is fully specified for the industrial temperature range of -40°C to +125°C and is backed by ST’s 15-year product longevity commitment, ensuring long-term supply stability for industrial equipment manufacturers.

Working Principle: VNI4140K Working Principle

The VNI4140K quad high-side smart power switch operates through several integrated functional blocks:

1. Power Stage: Each of the four channels contains a vertical N-channel power MOSFET with RDS(on) of typically 80mΩ. The MOSFET is configured as a high-side switch, connecting the load to VCC when turned on. Multiple source-bonded pins (3 per channel) provide high current handling capability.

2. Charge Pump: Since the power MOSFETs are N-channel devices operating in high-side configuration, an internal charge pump generates a voltage above VCC to properly drive the MOSFET gates. The charge pump operates at approximately 1.45 MHz and requires no external components.

3. Input Logic and Level Shifter: The four INx pins accept 3.3V/5V CMOS/TTL logic levels. Input threshold levels are VIL = 0.8V max and VIH = 2.2V min. Level shifters translate the logic-level signals to the appropriate gate drive voltages referenced to VCC.

4. Current Limiting: Each channel has an active current limit circuit that senses the output current and reduces the gate drive if the current exceeds the limit threshold (typically 0.7A at 24V). This prevents the system power supply from collapsing during short-circuit conditions and protects the MOSFET from overcurrent damage.

5. Thermal Protection – Junction Level: Each channel has its own temperature sensor. If the junction temperature exceeds TTSD (typically 170°C), that channel is shut down. When the junction cools below TR (135°C), the channel automatically restarts. This creates thermal cycling during sustained overload conditions, protecting the device while maintaining partial functionality.

6. Thermal Protection – Case Level: A case temperature sensor monitors overall package temperature. If TCSD (typically 130°C) is reached, all overloaded channels are shut down. They restart non-simultaneously (staggered) when the case cools below TCR (110°C), preventing high peak inrush currents.

7. Undervoltage Lockout (UVLO): If VCC drops below the undervoltage threshold (10.5V max), all outputs are turned off to prevent undefined operation. Hysteresis (0.4-0.5V) prevents chattering at the threshold.

8. Status/Diagnostic Outputs: Four open-drain STATx pins provide per-channel fault indication. When a channel enters thermal shutdown due to overtemperature, its STAT pin goes low (sinking current). This allows the system controller to detect and diagnose fault conditions per channel.

9. Inductive Load Demagnetization: When turning off an inductive load, the output voltage is clamped to approximately VCC–41V, allowing the inductor current to circulate and decay rapidly. The PowerSSO package’s high thermal capacitance absorbs the energy pulse without external freewheeling diodes.

Pin Description: VNI4140K Pin Definition and Functions
Pin No. Pin Name Type Function
1 VCC Power Main supply voltage input (10.5V to 36V DC). Bypass with capacitor to GND.
2 IN1 Input Channel 1 logic input. 3.3V/5V CMOS/TTL compatible. High = ON, Low = OFF.
3 STAT1 Output Channel 1 status output, open-drain. Pulled low when channel 1 is in thermal fault.
4 IN2 Input Channel 2 logic input. 3.3V/5V CMOS/TTL compatible.
5 STAT2 Output Channel 2 status output, open-drain. Pulled low during thermal fault.
6 GND Ground Device ground connection
7 STAT3 Output Channel 3 status output, open-drain. Fault indicator for channel 3.
8 IN3 Input Channel 3 logic input. 3.3V/5V CMOS/TTL compatible.
9 STAT4 Output Channel 4 status output, open-drain. Fault indicator for channel 4.
10 IN4 Input Channel 4 logic input. 3.3V/5V CMOS/TTL compatible.
11-12 NC – No connection. Leave unconnected.
13-15 OUT4 Output Channel 4 power output (three parallel pins). Connect to load.
16-18 OUT3 Output Channel 3 power output (three parallel pins). Connect to load.
19-21 OUT2 Output Channel 2 power output (three parallel pins). Connect to load.
22-24 OUT1 Output Channel 1 power output (three parallel pins). Connect to load.
Tab Tab (VCC) Power Exposed tab internally connected to VCC. Solder to PCB copper area for heatsinking.

Package: PowerSSO-24 (also known as PowerSO-24). 24-lead surface-mount package with exposed bottom tab. Tab is at VCC potential. Each output channel has three parallel pins for high current carrying capacity.

Application Scenarios: In which products and applications is VNI4140K used
  • PLC Digital Output Modules: Four-channel isolated digital output cards for programmable logic controllers in factory automation, where the VNI4140K provides protected 24V outputs driving solenoids, relays, and indicator lamps with built-in fault diagnostics.
  • Solenoid and Valve Drivers: Proportional and on/off solenoid valve control in pneumatic and hydraulic systems, leveraging the fast inductive load demagnetization feature to handle valve coil turn-off transients safely.
  • Industrial Lamp and LED Drivers: Driving indicator lamps, stack lights, and LED arrays in industrial control panels, with the current limiting feature handling incandescent lamp inrush currents during turn-on.
  • CNC Machine Tools: Auxiliary output control in CNC machine controllers, driving coolant pumps, tool changers, work holding solenoids, and other 24V DC loads in machining centers and robotic cells.
  • Relay and Contactor Coil Drivers: Driving relay and contactor coils in motor control centers and power distribution panels, where the high-side configuration and integrated protection simplify design and improve reliability.
  • Motor Control and Actuators: Small DC motor control, actuator drives, and stepper motor phase switching in industrial automation equipment requiring protected outputs with current limiting and thermal protection.
  • Industrial PC Peripheral I/O: Add-on digital output cards for industrial PCs and embedded computers, providing isolated or non-isolated 24V outputs for machine vision systems, data acquisition, and test equipment.
  • Building Automation: HVAC control systems, access control, and building management systems (BMS) requiring reliable 24V DC switching for dampers, locks, lighting relays, and other building loads.
Alternative Models: What chips are recommended as replacements for VNI4140K
Manufacturer Part Number Channels Iout/ch Notes
STMicroelectronics VNI4140K-32 4 1.0A Same device, higher current limit
STMicroelectronics IPS4140HQ 4 0.6A QFN-48L package, same specs
STMicroelectronics VNI2140J 2 1.0A Dual channel, PowerSSO-12
STMicroelectronics VN808CM 8 0.5A Octal channel, more outputs
Infineon BTN8982TA 1 35A High current single half-bridge
Texas Instruments TPS4H160BQPWPRQ1 4 2.5A 4-channel high-side, higher current
Onsemi NCV8402ADDR2G 2 2.4A Dual high-side, automotive grade

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1