Opens in a new tab

A4950ELJTR-T

Full-bridge DMOS PWM motor driver, ±3.5A peak, 8-40V, SOICN-8 EP, Allegro A4950, OCP/thermal/UVLO protection

8650

Effective Inventory

Image for reference only

Manufacturer Part:

A4950ELJTR-T

Package:

SOICN-8 (8-lead small outline, 3.9mm width, exposed thermal pad for enhanced heat dissipation)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A4950ELJTR-T is a fully integrated DMOS full-bridge PWM motor driver from Allegro MicroSystems. Designed for pulse-width modulated (PWM) control of DC brushed motors, this device is capable of delivering peak output currents up to ±3.5 A and operating with supply voltages up to 40 V. The A4950 provides a complete motor drive solution with integrated power MOSFETs, current sensing, and comprehensive protection circuitry.

Two logic input terminals (IN1, IN2) allow direct control of motor speed and direction using externally applied PWM signals. Internal synchronous rectification control circuitry reduces power dissipation during PWM operation, improving efficiency and reducing thermal requirements. An integrated current sense amplifier with a VREF input provides adjustable current limiting for accurate motor current control.

Housed in a low-profile 8-pin SOICN package with an exposed thermal pad (suffix LJ), the A4950ELJTR-T offers excellent thermal performance in a compact footprint. The E-suffix version operates over the commercial temperature range of -40°C to +85°C, making it suitable for consumer, industrial, and office automation applications. Internal protection features include overcurrent protection (OCP), motor short-to-ground and short-to-supply protection, thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection.

Key Specifications

Parameter Value
Output Configuration Full-Bridge (H-Bridge)
Peak Output Current ±3.5 A
Continuous Output Current 2.5 A (at 100% duty cycle)
Operating Supply Voltage (VBB) 8 V to 40 V
RDS(on) Total (Source + Sink) 0.6 Ω typ @ TJ=25°C, 2.5A
Logic Input Voltage 3.3 V / 5 V compatible
Input Hysteresis 250 mV typ
Current Sense Gain (AV) 10 V/V typical
Synchronous Rectification Integrated, automatic
Quiescent Current (Standby) 10 µA typical
Thermal Resistance θJA 35°C/W (4-layer PCB, JEDEC)
Maximum Junction Temperature 150°C
Operating Temperature (E-grade) –40°C to +85°C
Package SOICN-8 with exposed thermal pad

Features

  • DMOS full-bridge motor driver, ±3.5 A peak output
  • Wide operating voltage: 8 V to 40 V
  • Low RDS(on) outputs: 0.6 Ω total typical
  • Internal synchronous rectification for low power dissipation
  • Adjustable PWM current limit via VREF pin
  • Integrated current sense amplifier (10 V/V gain)
  • Overcurrent protection (OCP)
  • Motor lead short-to-ground and short-to-supply protection
  • Thermal shutdown with hysteresis
  • Undervoltage lockout (UVLO)
  • Crossover-current (shoot-through) protection
  • Low power standby mode (10 µA)
  • 3.3 V / 5 V compatible logic inputs
  • SOICN-8 package with exposed thermal pad
  • RoHS compliant, 100% matte tin leadframe

Applications

  • DC brushed motor drivers for consumer and industrial products
  • Office automation (printers, scanners, copiers)
  • Robotics and servo actuators
  • Home appliances and white goods
  • Automotive accessories (non-safety)
  • Camera and lens control systems
  • Industrial valve and solenoid drivers
  • Battery-powered motor control
Product Introduction: A4950ELJTR-T Product Introduction

The A4950ELJTR-T is a fully integrated DMOS full-bridge motor driver IC from Allegro MicroSystems. It provides a complete single-chip solution for driving DC brushed motors with pulse-width modulation (PWM) control, featuring integrated power MOSFETs, current sensing, and comprehensive fault protection.

Capable of sourcing and sinking up to 3.5A peak output current and operating from supply voltages between 8V and 40V, the A4950 is well-suited for a wide range of motor applications including office automation, industrial equipment, consumer products, and automotive subsystems. The full-bridge topology supports both forward and reverse motor operation as well as coast and brake modes, all controlled via the two logic input pins (IN1 and IN2).

A key feature of the A4950 is its integrated current regulation system. The VREF pin sets the current limit threshold, and an internal current sense amplifier with a typical gain of 10V/V provides proportional current sensing through the LSS (low-side sense) pin. This allows the system designer to implement accurate current limiting for motor torque control or stall detection without external current sense amplifiers.

Synchronous rectification is automatically activated during PWM operation, significantly reducing power dissipation by conducting current through the low-resistance MOSFET channel instead of the body diode. This improves efficiency and reduces thermal buildup, especially at higher current levels.

The device incorporates a comprehensive set of protection features including overcurrent protection, motor short-to-ground and short-to-supply detection, thermal shutdown with hysteresis, undervoltage lockout, and crossover-current (shoot-through) protection. The A4950ELJTR-T is supplied in an 8-pin SOICN package with an exposed thermal pad for optimal thermal performance, with 3000 pieces per 13-inch reel.

Working Principle: A4950ELJTR-T Working Principle

The A4950 full-bridge motor driver operates by controlling four DMOS power transistors arranged in an H-bridge configuration to drive a DC motor. Here’s a breakdown of its operation:

1. Full-Bridge Power Stage: Four N-channel DMOS transistors are arranged in an H-bridge (full-bridge) topology. Two high-side MOSFETs connect the motor terminals to VBB, while two low-side MOSFETs connect them to ground (LSS). By selectively turning on different pairs of MOSFETs, current can be directed through the motor in either direction (forward/reverse), or the motor can be shorted (brake) or disconnected (coast).

2. Input Logic and Decoding: The IN1 and IN2 logic inputs control the bridge configuration. A truth table determines the output state: IN1=H/IN2=L = forward (OUT1=VBB, OUT2=GND); IN1=L/IN2=H = reverse (OUT1=GND, OUT2=VBB); IN1=L/IN2=L = coast (both high-side off); IN1=H/IN2=H = brake/slow decay (both low-side on). Inputs are 3.3V/5V compatible with hysteresis for noise immunity.

3. Charge Pump: Since all four MOSFETs are N-channel, an internal charge pump generates a voltage above VBB to properly drive the gates of the high-side MOSFETs. The charge pump operates at high frequency and requires no external components.

4. Current Sensing and Regulation: The low-side MOSFETs have integrated current sensing that produces a proportional current at the LSS pin. An internal sense amplifier with a gain of approximately 10V/V compares the sensed current with the VREF reference voltage. When the load current reaches the threshold set by VREF, the current limit circuit activates, cycling the output to maintain constant current.

5. Synchronous Rectification: During PWM operation (when the current is recirculating), the A4950 automatically turns on the appropriate MOSFETs to conduct the recirculation current through the low RDS(on) channel rather than through the body diode. This reduces power dissipation and improves efficiency significantly compared to diode-based freewheeling.

6. Overcurrent Protection (OCP): If the output current exceeds the OCP threshold (significantly above the normal operating range), the device immediately limits the current to protect the power MOSFETs and the load. This protects against short-circuit conditions at the motor terminals.

7. Thermal Shutdown: An on-chip temperature sensor monitors the junction temperature. If TJ exceeds approximately 165°C, the device enters thermal shutdown, disabling all outputs. Hysteresis of approximately 25°C ensures the device restarts only after sufficient cooling.

8. Undervoltage Lockout (UVLO): If the supply voltage VBB drops below the UVLO threshold, all outputs are disabled to prevent undefined operation. The device automatically restarts when VBB returns above the threshold with hysteresis to prevent chattering.

Pin Description: A4950ELJTR-T Pin Definition and Functions
Pin No. Pin Name Type Function
1 GND Ground Device ground reference. Connect to system ground plane.
2 IN2 Input Logic input 2. Controls bridge direction along with IN1. 3.3V/5V CMOS compatible. Internal 50kΩ pull-down resistor.
3 IN1 Input Logic input 1. Controls bridge direction along with IN2. 3.3V/5V CMOS compatible. Internal 50kΩ pull-down resistor.
4 VREF Input Current limit reference voltage input. Sets the overcurrent trip threshold. Range: 0V to 5V. ILIMIT ≈ VREF / (RSENSE × AV), where AV≈10V/V.
5 VBB Power Motor supply voltage input (8V to 40V). Bypass with a 100nF ceramic capacitor placed close to the pin, plus a bulk electrolytic capacitor.
6 OUT1 Output Full-bridge output 1. Connect to one terminal of the DC motor or load.
7 LSS Output/Power Low-side sense connection. Connect to ground through a sense resistor for current monitoring, or directly to ground if current sensing is not used. This is the return path for the low-side MOSFETs.
8 OUT2 Output Full-bridge output 2. Connect to the other terminal of the DC motor or load.
Pad Exposed Pad (GND) Thermal/Ground Exposed thermal pad on bottom of package. Internally connected to GND (pin 1). Must be soldered to PCB ground plane for proper heat dissipation and electrical connection.

Package: SOICN-8 (8-lead small outline package with exposed thermal pad). Body dimensions: approximately 4.9mm × 3.9mm, 1.27mm lead pitch. Exposed pad on bottom for enhanced thermal dissipation.

Application Scenarios: In which products and applications is A4950ELJTR-T used
  • Office Automation Equipment: Paper feed motors, carriage drives, and stepper motor replacements in printers, scanners, multifunction devices, and copiers, where the A4950 provides efficient PWM speed control with built-in current limiting and protection.
  • Robotics and Actuators: DC motor drive for small robotic platforms, robotic arms, grippers, and linear actuators in industrial automation, educational robots, and hobbyist robotics projects requiring bidirectional speed control.
  • Home Appliances: Motor control in white goods such as washing machines, dishwashers, refrigerators, and small kitchen appliances, driving pumps, valves, fans, and actuator motors with reliable overcurrent and thermal protection.
  • Consumer Electronics: Camera lens autofocus and zoom motors, projector lens controls, DVD/Blu-ray drive motors, and other consumer devices requiring compact, efficient, low-voltage DC motor control with minimal external components.
  • Industrial Valves and Solenoids: Driving solenoid valves and proportional solenoids in industrial process control, pneumatic systems, and hydraulic control systems, where the current regulation feature enables precise force or position control.
  • Automotive Subsystems: Non-safety automotive applications such as seat adjustment motors, mirror positioning, HVAC blower motors, and small actuators (note: A4950K automotive grade version available for AEC-Q100 requirements).
  • Battery-Powered Motor Control: Portable and battery-operated motor drives in power tools, garden equipment, and handheld devices, where the low standby current (10µA) helps preserve battery life during idle periods.
  • Medical and Healthcare Devices: Small motor and pump control in medical infusion pumps, diagnostic equipment, dental tools, and lab automation devices requiring reliable, compact motor drive with overcurrent protection for safety.
Alternative Models: What chips are recommended as replacements for A4950ELJTR-T

<n

<n

Manufacturer Part Number Channels Iout (peak) Voltage Notes
Allegro A4950KLJTR-T 1 (full-bridge) 3.5 A 8–40V Automotive grade (AEC-Q100 Grade 1), -40 to 125°C
Allegro A4953 1 (full-bridge) 2 A 2.5–16V Lower voltage, lower current, similar feature set
Allegro A4988 1 (stepper) 2 A 8–35V Stepper motor driver with translator, same package family
TI DRV8870 1 (full-bridge) 3.6 A 6.5–45V TI equivalent, PWM control, similar features
TI DRV8837 1 (full-bridge) 1.8 A 1.8–11V Lower voltage, lower current alternative
STMicro L298N 2 (full-bridge) 2 A 4.8–46V Dual H-bridge, classic through-hole, higher Rds(on)
Infineon BTN7971B 1 (half-bridge) 30 A 5.5–40V Much higher current, TO-263 package

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1