Opens in a new tab

BTS7200-2EPA

Dual-channel smart high-side power switch, 2×1.2A, 66.5mΩ typ, 3.1-28V, TSDSO-14 EP, Infineon PROFET+2 12V, ISO26262-ready, AEC-Q100

9350

Effective Inventory

Image for reference only

Manufacturer Part:

BTS7200-2EPA

Package:

PG-TSDSO-14 (14-lead thin shrink dual small outline, 4.4mm width, 5.0mm length, 0.65mm pitch, exposed thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTS7200-2EPA is a dual-channel smart high-side power switch from Infineon Technologies, part of the advanced PROFET™+2 12V family. Fabricated in Infineon’s SMART7 technology, this device integrates two independent N-channel power MOSFETs with next-generation protection, diagnostics, and control features, offering significant improvements over previous PROFET generations.

Each channel features a low on-resistance of typically 66.5 mΩ (120 mΩ max), with a nominal load current rating of 1.2 A per channel. The device operates from 3.1 V to 28 V, making it suitable for 12V automotive systems with excellent low-voltage start capability down to 2.7 V (typical), enabling reliable operation even during cold-crank conditions.

The BTS7200-2EPA provides proportional current sense outputs (IS pin, multiplexed for both channels) with high accuracy, enabling precise load current monitoring. Advanced protection features include overcurrent protection with latch tripping and intelligent restart control, absolute and dynamic temperature limitation with controlled restart, open-load detection in both ON and OFF states, short-circuit to ground and battery protection, and undervoltage shutdown. The device is AEC-Q100 Grade 1 qualified and ISO 26262-ready, making it suitable for safety-related automotive applications. It is housed in a PG-TSDSO-14 package with exposed thermal pad.

Key Specifications

Parameter Value
Number of Channels 2 (dual high-side)
RDS(on) typical per channel 66.5 mΩ
RDS(on) max per channel 120 mΩ
Nominal Load Current per Channel 1.2 A
Current Limit Range 7.3 A to 10 A (typical 8.5 A)
Operating Supply Voltage (VS) 3.1 V to 28 V (2.7 V min start)
Diagnostic Type Proportional analog current sense (multiplexed)
Current Sense Accuracy High precision (kILIS proportional)
Open Load Detection ON-state and OFF-state
Short Circuit Protection To GND and to VS (battery)
Turn-ON Time (ton) 110 µs typical
Turn-OFF Time (toff) 110 µs typical
Undervoltage Recovery With delay (configurable behavior)
Operating Junction Temperature –40°C to +150°C
Package PG-TSDSO-14 (exposed thermal pad)
Qualification AEC-Q100 Grade 1, ISO 26262-ready
Longevity Production planned through 2040

Features

  • Dual-channel smart high-side power switch, PROFET™+2 12V
  • SMART7 technology, 66.5 mΩ typical RDS(on) per channel
  • 1.2 A nominal load current per channel
  • Wide operating voltage: 3.1 V to 28 V
  • Cold-crank start capability down to 2.7 V
  • Proportional load current sense (high accuracy)
  • Open load detection in ON and OFF states
  • Overcurrent protection with latch trip and intelligent restart
  • Absolute and dynamic temperature limitation with controlled restart
  • Short circuit to ground and battery protection
  • Undervoltage shutdown with recovery delay
  • Overvoltage protection (with external components)
  • Reverse voltage protection capability
  • Inverse ON capability (switch on with inverse current)
  • ISO 26262-ready for safety-related systems
  • AEC-Q100 Grade 1 qualified
  • Green product (RoHS compliant, lead-free, halogen-free)
  • PG-TSDSO-14 package with exposed pad
  • Long-term availability guaranteed through 2040

Applications

  • Automotive body electronics
  • New energy vehicle powertrain systems
  • LED lighting control and bulb replacement
  • Relay and solenoid drivers
  • Automotive safety-related systems (ISO 26262)
  • R5W / W5W lamp drivers
  • Door modules and seat control
  • HVAC flap and actuator drivers
  • Replaces electromechanical relays and fuses
Product Introduction: BTS7200-2EPA Product Introduction

The BTS7200-2EPA is a dual-channel intelligent high-side power switch from Infineon Technologies’ state-of-the-art PROFET™+2 12V family. Built on Infineon’s advanced SMART7 power technology, this device represents the next generation of smart power switches with significantly improved performance, diagnostics, and protection compared to earlier PROFET generations.

Each of the two channels features a typical on-resistance of only 66.5mΩ (120mΩ maximum), enabling efficient 1.2A load driving in a compact PG-TSDSO-14 package. The wide operating voltage range from 3.1V to 28V, combined with the ability to start at voltages as low as 2.7V, ensures reliable operation even during severe cold-crank conditions in automotive applications.

A hallmark of the PROFET+2 generation is the highly accurate proportional current sense function. A single IS pin provides a multiplexed current sense output proportional to the load current, enabling precise load current monitoring for advanced diagnostics. The device supports open-load detection in both the ON and OFF states, as well as detection of short circuits to both ground and battery supply.

Advanced protection features include overcurrent protection with latch tripping and intelligent restart control, absolute and dynamic temperature limitation with controlled restart behavior, undervoltage shutdown with recovery delay, and overvoltage protection capability with external components. The device also supports Inverse ON operation, allowing it to switch on even when current flows in the reverse direction.

The BTS7200-2EPA is AEC-Q100 Grade 1 qualified and ISO 26262-ready, with comprehensive safety documentation available for integration into functional safety systems. This makes it suitable for safety-related automotive applications such as lighting, actuators, and powertrain auxiliary loads in both conventional and electric vehicles. With production guaranteed through at least 2040, it provides long-term supply security for automotive programs.

Working Principle: BTS7200-2EPA Working Principle

The BTS7200-2EPA is a dual-channel intelligent high-side power switch that integrates advanced SMART7 technology for superior performance and diagnostics. Here are the key functional blocks for each channel:

1. Power Stage: Each channel features an N-channel vertical power MOSFET with very low on-resistance (66.5mΩ typical). As a high-side switch, the MOSFET connects the load to the positive supply voltage when turned on. An integrated charge pump generates the gate drive voltage above VS needed for N-channel high-side operation. The two channels share supply and ground but are otherwise functionally independent.

2. Input Control: Each channel has its own logic input (IN1, IN2) for independent ON/OFF control. The inputs are compatible with 3.3V and 5V CMOS logic levels, with hysteresis for noise immunity. A DEN (Diagnostic Enable) pin controls diagnostic output behavior and can be used for multiplexing or enabling/disabling the sense output.

3. Proportional Current Sense: The IS pin provides a highly accurate current mirror output proportional to the load current. The sense ratio kILIS determines the scaling between actual load current and sense current. This analog proportional sense allows the external microcontroller to precisely monitor the load current for advanced diagnostics, predictive maintenance, and precise current regulation.

4. Overcurrent Protection with Latch Trip: When the output current exceeds the current limit threshold (7.3-10A typical), the device trips and latches off after a defined time, rather than cycling indefinitely. Intelligent restart control allows configurable restart behavior, providing robust protection against short circuits while minimizing nuisance tripping.

5. Thermal Protection: Advanced thermal management includes both absolute temperature limitation (maximum junction temperature protection) and dynamic temperature limitation, which adjusts the current limit based on temperature to optimize power handling. Controlled restart ensures smooth recovery after thermal events.

6. Open Load Detection: The device can detect open-load conditions both when the channel is ON and when it is OFF. In the ON state, very low current indicates a missing or burned-out load. In the OFF state, a small sense current detects whether the load is properly connected. This is valuable for LED and bulb monitoring applications.

7. Undervoltage Shutdown: If the supply voltage drops below the undervoltage threshold, the device shuts down to prevent undefined operation. A recovery delay ensures the supply is stable before restarting, preventing chattering during brown-out conditions.

8. Inverse ON Capability: A unique feature of the PROFET+2 family is the ability to switch on even when current flows in the reverse direction (from output to supply). This is useful in applications where back-driving or reverse current conditions may occur, such as certain motor or solenoid configurations.

Pin Description: BTS7200-2EPA Pin Definition and Functions
Pin No. Pin Name Type Function
1 IN1 Input Logic input for channel 1. Active high = ON, low = OFF. 3.3V/5V CMOS compatible with hysteresis. Connect to MCU GPIO.
2 IN2 Input Logic input for channel 2. Active high = ON, low = OFF. 3.3V/5V CMOS compatible. Connect to MCU GPIO.
3 DEN Input Diagnostic Enable input. Controls the IS sense output. Used for diagnostic multiplexing and enabling/disabling current sense output.
4 IS Output Current sense output. Provides a proportional current mirror of the load current (multiplexed for both channels). Connect to ADC input via sense resistor for current measurement.
5 GND Ground Logic and power ground reference. Connect to system ground plane.
6 OUT2 Power Output Channel 2 high-side switch output. Connect to load (load other end to ground).
7 OUT2 Power Output Additional channel 2 output pin (paralleled internally). Connect together with pin 6 to the load.
8 OUT1 Power Output Channel 1 high-side switch output. Connect to load (load other end to ground).
9 OUT1 Power Output Additional channel 1 output pin (paralleled internally). Connect together with pin 8 to the load.
10 VS Power Supply voltage input (3.1V to 28V operating). Connect to battery/12V rail. Bypass with 100nF ceramic capacitor close to pin.
11 VS Power Additional supply pin, internally parallel to pin 10. Must connect together to supply rail.
12 VS Power Additional supply pin, internally parallel. All VS pins must connect together.
13 VS Power Additional supply pin, internally parallel. All VS pins must connect together for proper operation.
14 VS Power Additional supply pin, internally parallel. All VS pins must connect together.
Pad Exposed Pad Thermal/Power Exposed thermal pad on bottom of package. Must be soldered to PCB copper area for heat dissipation. Internally connected to VS (supply voltage).

Package: PG-TSDSO-14 (14-lead Thin Shrink Dual Small Outline package). Body dimensions: approximately 5.0mm × 4.4mm, 0.65mm fine pitch lead spacing, exposed thermal pad on bottom. Small footprint for space-constrained automotive electronics designs.

Application Scenarios: In which products and applications is BTS7200-2EPA used
  • Automotive LED Lighting Control: Driving LED headlight modules, DRL (Daytime Running Lights), taillights, and interior LED lighting in body control modules (BCMs) and light control units, where accurate current sensing enables LED health monitoring and open/short fault detection for diagnostic reporting.
  • Automotive Body Electronics: General-purpose load switching in BCMs, door modules, seat controllers, and trunk modules for solenoids, small motors, heating elements, and indicator lamps, replacing mechanical relays with solid-state reliability and diagnostics.
  • NEV Powertrain Auxiliaries: Auxiliary load control in new energy vehicles (BEV, PHEV), including cooling system valves, pump drivers, heater control, and high-voltage system auxiliary loads, where ISO 26262 readiness supports functional safety requirements.
  • Safety-Related Automotive Systems: Load control in safety-relevant systems such as brake light drivers, turn signal indicators, and ADAS sensor power supplies, leveraging the ISO 26262-ready design and comprehensive safety documentation for ASIL-rated systems.
  • HVAC Flap and Actuator Drivers: Driving HVAC blend door actuators, recirculation flaps, and stepper motors in climate control systems, with current sensing providing stall detection and position feedback for improved climate control accuracy and diagnostics.
  • R5W/W5W Lamp Drivers: Directly driving small automotive bulbs such as R5W and W5W type indicator lamps, side markers, and interior lights, with the device’s high inrush current capability handling lamp turn-on surges and open-load detection for bulb-out monitoring.
  • Relay and Solenoid Drivers: Driving automotive relays, solenoid valves, and small contactors in transmission control, fuel injection systems, and emissions control equipment, where the inductive load handling and diagnostics improve system reliability.
  • Door and Seat Control Modules: Power distribution in door modules (lock actuators, mirror heaters, ambient lighting) and seat control units (position motors, heating elements), with the compact TSDSO-14 package enabling high-density designs in space-constrained locations.
Alternative Models: What chips are recommended as replacements for BTS7200-2EPA
Manufacturer Part Number Channels RDS(on)/ch Iout/ch Package Notes
Infineon BTS7200-2EPC 2 66 mΩ 1.2 A TSDSO-14 Same family, different variant
Infineon BTS7200-4EPA 4 66 mΩ 1 A TSDSO-24 Quad channel version, same family
Infineon BTS5210L 2 140 mΩ 2.4 A DSO-12 Classic PROFET 24V, higher current
Infineon BTS5090-1EJA 1 90 mΩ 3 A DSO-8 EP Single channel, PROFET+ 12V
STMicro VN7020AJ 2 100 mΩ 2 A PowerSSO-12 ST dual channel high-side
TI TPS2HB50-Q1 2 45 mΩ 2.5 A HTSSOP-14 TI automotive dual high-side

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1