Opens in a new tab

W79E632A40PL

8051 1T core MCU, 40MHz, 64KB Flash, 1280B RAM, 12ch 10bit ADC, 6ch PWM, 2UART, SPI, I2C, PLCC-44, Nuvoton W79E series

7200

Effective Inventory

Image for reference only

Manufacturer Part:

W79E632A40PL

Package:

PLCC-44 (44-pin plastic leaded chip carrier, 16.59mm x 16.59mm, 1.27mm pitch, through-hole socket compatible)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The W79E632A40PL is an 8-bit microcontroller from Nuvoton Technology, based on the high-performance 8051-compatible core that operates at up to 40 MHz. This device features 64 KB of in-system programmable (ISP) Flash memory, 1280 bytes of on-chip RAM, and a rich set of peripherals including multiple UARTs, SPI, I2C, timers, and PWM channels, making it suitable for a wide range of embedded control applications.

The enhanced 8051 core executes instructions up to 12 times faster than the standard 8051 at the same clock frequency, thanks to its 1T (one clock per machine cycle) architecture. The device includes 64 KB of main Flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capabilities, allowing firmware updates without removing the chip from the system. An additional 4 KB of LDROM (Loader ROM) is dedicated to the ISP bootloader.

Available in a PLCC-44 package, the W79E632A40PL provides up to 40 general-purpose I/O pins, four 16-bit timers/counters, a 12-channel 10-bit ADC, two UARTs, SPI interface, I2C interface, six channels of PWM, and an on-chip power-on reset with brown-out detection. The device operates from a 2.4 V to 5.5 V supply, supports both internal RC oscillator (22.1184 MHz) and external crystal options, and is specified over the industrial temperature range of -40 degC to +85 degC.

Key Specifications

Parameter Value
Core 8051-compatible 1T core
Max Operating Frequency 40 MHz
Program Flash Memory 64 KB (ISP / IAP capable)
LDROM (Boot Loader) 4 KB
SRAM (internal) 1280 bytes (256 + 1024 XRAM)
Data Flash (EEPROM) ~4 KB (shared from Flash)
GPIO Pins Up to 40
Timers/Counters 4 x 16-bit (Timer 0/1/2/3)
PWM Channels 6 channels
ADC 12-channel, 10-bit resolution
UART 2 (UART0, UART1)
SPI Interface 1 (Master/Slave)
I2C Interface 1 (Master/Slave)
Watchdog Timer Yes, programmable
Brown-Out Detector Yes, multiple levels
Power-On Reset Integrated
Internal Oscillator 22.1184 MHz RC
Operating Voltage 2.4 V to 5.5 V
Operating Temperature -40 degC to +85 degC
Package PLCC-44

Features

  • 8051-compatible 1T core, up to 40 MHz operation
  • 64 KB Flash program memory with ISP and IAP
  • 4 KB LDROM for ISP bootloader
  • 1280 bytes on-chip RAM (256B direct + 1024B XRAM)
  • Up to 40 general-purpose I/O pins
  • Four 16-bit timers/counters (Timer 0/1/2/3)
  • 6-channel PWM output with independent control
  • 12-channel 10-bit SAR ADC
  • Two UARTs with enhanced features
  • SPI interface (master/slave mode)
  • I2C interface (master/slave mode)
  • Internal 22.1184 MHz RC oscillator (+-1%)
  • External crystal/oscillator support
  • Integrated power-on reset (POR)
  • Brown-out reset with selectable levels
  • Watchdog timer (WDT)
  • Idle and power-down modes
  • Wide supply range: 2.4 V to 5.5 V
  • Industrial temperature range: -40 degC to +85 degC
  • PLCC-44 through-hole package
  • RoHS compliant and lead-free

Applications

  • Industrial control and automation
  • Home appliances and consumer electronics
  • Motor control and fan controllers
  • Power supply management and monitoring
  • Smart meters and energy monitoring
  • Security and access control systems
  • LED lighting control and dimmers
  • Human-machine interface (HMI) panels
Product Introduction: W79E632A40PL Product Introduction

The W79E632A40PL is a high-performance 8-bit microcontroller from Nuvoton Technology, featuring an enhanced 8051-compatible CPU core with 1T (single-clock) architecture that delivers up to 12 times the performance of a traditional 8051 at the same clock frequency. With a maximum operating frequency of 40MHz, this MCU provides significant processing power for embedded control applications while maintaining full software compatibility with the vast 8051 codebase.

The device integrates 64KB of Flash program memory supporting both In-System Programming (ISP) and In-Application Programming (IAP). ISP allows firmware updates through a serial interface without removing the chip from the target board, while IAP enables the application code to modify the Flash memory during runtime – useful for storing user parameters, calibration data, or implementing field-upgradable firmware. A dedicated 4KB LDROM (Loader ROM) stores the ISP bootloader code, ensuring that the main program memory can be safely reprogrammed.

Peripheral features are comprehensive: four 16-bit timers/counters, six independent PWM channels suitable for motor control and LED dimming, a 12-channel 10-bit SAR ADC for analog sensor interfacing, two enhanced UARTs, SPI master/slave interface, I2C master/slave interface, and a watchdog timer. Up to 40 general-purpose I/O pins provide ample connectivity for user interfaces and external devices.

The W79E632 includes an internal 22.1184MHz RC oscillator with +-1% accuracy, eliminating the need for an external crystal in many cost-sensitive applications. The device operates over a wide voltage range of 2.4V to 5.5V and is fully specified for the industrial temperature range of -40 degC to +85 degC. The PLCC-44 package offers the convenience of socketed designs, making it particularly suitable for prototyping, low-volume production, and applications where field replacement may be required.

Working Principle: W79E632A40PL Working Principle

The W79E632 is an 8051-compatible microcontroller built around a highly optimized 1T core architecture. Here are the key aspects of its operation:

1. 1T 8051 Core: The CPU executes most instructions in 1 clock cycle (1T), compared to the original 8051 which required 12 clock cycles per machine cycle. This 12x performance improvement means that at 40MHz, the W79E632 delivers performance equivalent to a 480MHz classic 8051. The core includes all standard 8051 features: 8-bit ALU, accumulator, B register, program status word, stack pointer, DPTR data pointer, and two banks of 8 general-purpose registers.

2. Memory Architecture:
– Program Memory: 64KB Flash mapped from 0000h to FFFFh. Executed directly from Flash with zero-wait-state access at frequencies up to 40MHz.
– Data Memory: 256 bytes of directly-addressable internal RAM (lower 128B direct/indirect, upper 128B indirect only), plus 1024 bytes of XRAM (extended RAM) accessible via MOVX instructions.
– LDROM: 4KB separate Flash block at separate address space, containing the ISP bootloader.

3. Flash Programming (ISP/IAP): The 64KB Flash can be programmed via ISP (In-System Programming) through the UART or other interface, using code resident in the LDROM. IAP (In-Application Programming) allows user code in the main Flash to erase and reprogram Flash pages during runtime, enabling data storage or self-updating firmware. Flash endurance is typically 10,000 erase/write cycles with 10-year data retention.

4. I/O Ports: Four 8-bit I/O ports (P0, P1, P2, P3) provide up to 32 I/O lines, with additional I/O available through other pins. Each pin can be configured as quasi-bidirectional, push-pull, open-drain, or input-only with pull-up, providing flexibility for different load conditions and interface requirements.

5. Timers and PWM: Four 16-bit timers/counters (Timer 0, 1, 2, 3) support standard 8051 timer modes plus additional modes. Six PWM channels provide independent pulse-width modulation outputs, each with its own period and duty cycle control, suitable for motor speed control, LED dimming, and other applications requiring variable duty-cycle signals.

6. ADC: A 10-bit successive approximation register (SAR) ADC with 12 multiplexed analog input channels converts analog voltages from sensors and other analog sources to digital values for processing by the CPU. Conversion time is programmable.

7. Serial Interfaces: Two UARTs provide serial communication (one with enhanced features including frame error detection and automatic address recognition), an SPI interface supports master and slave modes, and an I2C interface supports both master and slave operation at multiple speed grades.

8. Clock and Reset: An internal 22.1184MHz RC oscillator provides default clocking, or an external crystal/oscillator can be used for higher accuracy. Integrated power-on reset (POR) and brown-out detection (BOD) eliminate the need for external reset circuits in most applications.

Pin Description: W79E632A40PL Pin Definition and Functions
Pin Group Pin Name(s) Type Description
Power VDD (Pin 44) Power Positive supply voltage: 2.4V to 5.5V. Bypass with 0.1uF ceramic capacitor to VSS.
Power VSS (Pin 22) Ground Ground reference. Connect to system ground plane.
Port 0 P0.0-P0.7 I/O Port 0: 8-bit I/O port. Also serves as multiplexed address/data bus (AD0-AD7) when using external memory. Open-drain outputs, requires external pull-ups for general I/O.
Port 1 P1.0-P1.7 I/O Port 1: 8-bit I/O port with internal pull-ups. Alternate functions: T2/T2EX, RXD1/TXD1, SPI (P1.4-P1.7), ADC channels, PWM outputs.
Port 2 P2.0-P2.7 I/O Port 2: 8-bit I/O port with internal pull-ups. Provides high byte of address (A8-A15) in external memory mode.
Port 3 P3.0-P3.7 I/O Port 3: 8-bit I/O port with internal pull-ups. Alternate functions: RXD0, TXD0, INT0, INT1, T0, T1, WR, RD.
Reset RST (Pin 9) Input Reset input, active high. Apply high for 2 machine cycles to reset. Connect to RC reset circuit or reset controller.
Oscillator XTAL1 (Pin 19) Input Crystal oscillator input / external clock input. Connect to crystal or external clock source.
Oscillator XTAL2 (Pin 18) Output Crystal oscillator output. Connect to other side of crystal. Leave floating if using external clock on XTAL1.
ALE ALE/PROG (Pin 30) Output Address Latch Enable. Used to latch low byte of address in external memory access. Outputs 1/6 of oscillator frequency.
PSEN PSEN (Pin 29) Output Program Store Enable: read strobe for external program memory. Not used in normal single-chip mode.
EA EA/VPP (Pin 31) Input External Access Enable. Tie high for internal Flash execution. Tie low to use external program memory.
ADC AIN0-AIN11 Analog Input 12 analog input channels shared with port pins. 10-bit ADC conversion.
PWM PWM0-PWM5 Output 6 PWM output channels shared with port pins. Independent duty cycle and frequency control.
UART RXD/TXD I/O UART 0 and UART 1 receive/transmit pins, shared with port pins.
SPI SCK, MOSI, MISO, SS I/O SPI interface pins: clock, master-out-slave-in, master-in-slave-out, slave select. Shared with P1.

Package: PLCC-44 (Plastic Leaded Chip Carrier). 44 pins, 16.59mm x 16.59mm body, 1.27mm (0.05 inch) lead pitch. J-lead configuration suitable for through-hole sockets or surface mounting. Pin 1 is marked by a dot/notch on the package top.

Application Scenarios: In which products and applications is W79E632A40PL used
  • Industrial Control and Automation: PLC I/O modules, sensor data concentrators, small machine controllers, and factory automation equipment where the 8051’s proven architecture, rich peripheral set, and industrial temperature range provide reliable operation in demanding factory environments.
  • Home Appliances and Consumer Electronics: Washing machines, air conditioners, refrigerators, rice cookers, and other home appliances requiring motor control, sensor interfaces, and user interface handling, leveraging the 6-channel PWM for motor control and 12-channel ADC for temperature and other sensor measurements.
  • Motor and Fan Controllers: Brushless DC (BLDC) motor controllers, AC fan regulators, and pump controllers, using the PWM outputs for speed control, ADC for current/temperature sensing, and timers for commutation timing in sensorless or sensored motor drive algorithms.
  • Power Supply Management: Digital power supply controllers, battery chargers, and DC-DC converter controllers, where the ADC monitors voltage/current, PWM provides control signals, and UART enables communication with a host system for monitoring and configuration.
  • Smart Meters and Energy Monitoring: Electricity, water, and gas metering applications requiring pulse counting, LCD/LED display driving, real-time clock management, and communication interfaces (UART/SPI) for data readout and remote metering protocols.
  • Security and Access Control: Access control panels, alarm systems, door lock controllers, and intercom systems, using the GPIO for keypad scanning, UART for card reader communication, and I2C for connecting EEPROM and sensor peripherals.
  • LED Lighting Control: LED dimmers, RGB LED controllers, street lighting controllers, and architectural lighting systems, where multiple PWM channels provide independent dimming control for each color or lighting zone, and the ADC enables ambient light sensing.
  • Human-Machine Interface (HMI) Panels: Keypad and display controllers for industrial equipment, vending machines, and home automation panels, scanning matrix keypads, driving LED or LCD displays, and communicating with the main system controller via UART or SPI.
Alternative Models: What chips are recommended as replacements for W79E632A40PL
Manufacturer Part Number Flash RAM ADC PWM Package Notes
Nuvoton W79E632A48PL 64 KB 1280 B 12ch 10b 6ch PLCC-44 Same chip, 48MHz version
Nuvoton W79E2051 20 KB 512 B 8ch 10b 3ch 20-DIP Smaller, lower cost variant
STC STC89C52RC 8 KB 512 B – – 40-DIP Classic 8051, lower cost
Silicon Labs C8051F340 64 KB 4.2 KB 21ch 10b 4ch 48-QFP Higher performance, more features
STMicro STM8S007C8 64 KB 6 KB 10ch 10b 3ch 48-LQFP STM8 core, modern 8-bit
Microchip PIC18F66K90 64 KB 4 KB 16ch 12b 5ch 64-TQFP PIC architecture, different core

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1