Opens in a new tab

XC7A100T-FGG676

Artix-7 FPGA, 101K logic cells, 240 DSP, 4860KB BRAM, 8 GTX 6.6Gbps, PCIe Gen2 x4, 500 I/O, FBGA-676 27x27mm, 28nm HKMG, AMD Xilinx

540

Effective Inventory

Image for reference only

Manufacturer Part:

XC7A100T-FGG676

Package:

FGG676 (676-ball fine-pitch BGA, 27x27mm body, 1.0mm ball pitch, 26×26 ball array, 8 I/O banks, lead-free)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XC7A100T-FGG676 is an Artix-7 FPGA from Xilinx (AMD), featuring approximately 101,440 logic cells in a 676-ball Fine-pitch BGA package. As the mid-high density member of the Artix-7 family, this device delivers high DSP performance, abundant memory resources, and high-speed serial connectivity in a low-cost, low-power 7-series FPGA architecture.

Built on 28 nm high-k metal gate (HKMG) process technology, the XC7A100T integrates 15,850 CLB slices with 126,800 flip-flops, 240 DSP48E1 slices for high-performance signal processing, and 135 block RAMs totaling 4,860 Kb of embedded memory. Six clock management tiles (CMTs), each containing a mixed-mode clock manager (MMCM) and a PLL, provide flexible clock generation. The device integrates up to 8 GTX transceivers operating at up to 6.6 Gb/s, plus a PCIe Gen2 x4 endpoint block and dual 1G/2.5G Ethernet MACs with GMII/RGMII interfaces.

The FGG676 package measures 27 x 27 mm with 1.0 mm ball pitch, providing up to 500 user I/O pins across 8 I/O banks, supporting over 50 I/O standards including LVCMOS, LVTTL, HSTL, SSTL, LVDS, and differential signaling at up to 1,250 Mb/s. A dedicated memory interface block supports DDR3/DDR3L/LPDDR2/2S at data rates up to 800 Mb/s. The Artix-7 family continues Xilinx’s commitment to long product lifecycles, ideal for industrial and aerospace applications.

Key Specifications

Parameter Value
Logic Cells ~101,440
CLB Slices 15,850 (126,800 flip-flops)
Distributed RAM (max) ~1,140 Kb
Block RAM (36 Kb each) 135 (4,860 Kb total, or 270 x 18 Kb)
DSP48E1 Slices 240 (25×18 multiplier + 48-bit accumulator)
CMT (MMCM + PLL) 6 (6 MMCMs + 6 PLLs)
GTX Transceivers 8 (up to 6.6 Gb/s each)
PCIe Endpoint Block 1 (Gen2 x4, 5.0 Gb/s per lane)
Ethernet MACs 2 (1G/2.5G, GMII/RGMII/SGMII)
Memory Interface DDR3/DDR3L/LPDDR2, up to 800 Mb/s
I/O Banks 8 banks (4 HP + 4 HR)
Max User I/Os (FGG676) Up to 500 (high-range + high-performance)
Max LVDS Rate 1,250 Mb/s (1.25 Gb/s)
Core Voltage 1.0 V (1.0 V for -2/-3 speed grades)
Speed Grade -2 (typical for Artix-7)
Configuration SPI x1/x2/x4/x8, BPI x16, JTAG, Quad SPI, SelectMAP
Package FGG676 / FBGA-676 (27×27 mm, 1.0 mm pitch)
Technology 28 nm HKMG (high-k metal gate)

Features

  • Artix-7 family: highest performance-per-watt in low-cost FPGAs
  • ~101K logic cells with 6-input LUT, dual flip-flop architecture
  • 240 DSP48E1 slices: 25×18 multiplier + pre-adder + 48-bit accumulator
  • 4,860 Kb block RAM + ~1,140 Kb distributed RAM
  • 6 CMTs: each with MMCM + PLL for flexible clock synthesis
  • 8 GTX transceivers: up to 6.6 Gb/s per channel
  • Integrated PCI Express Gen2 x4 endpoint block
  • Dual 1G/2.5G Ethernet MACs with GMII/RGMII/SGMII
  • Dedicated memory interface controller (DDR3/DDR3L/LPDDR2)
  • Up to 500 user I/O pins across 8 banks
  • 50+ I/O standards: LVCMOS, LVTTL, HSTL, SSTL, LVDS
  • HP (high-performance) + HR (high-range) I/O banks
  • 1.25 Gb/s LVDS differential data rate
  • AES-256 bitstream encryption, HMAC authentication
  • Device DNA unique identifier
  • MultiBoot / Fallback configuration support
  • 28 nm HKMG process for low power and high performance
  • Vivado Design Suite + ISE support
  • MicroBlaze 32-bit soft processor support
  • RoHS compliant, lead-free FBGA package

Applications

  • Software-defined radio and wireless communications
  • Medical imaging and diagnostic equipment
  • Industrial automation and high-end control
  • Video processing and broadcast infrastructure
  • High-speed test and measurement equipment
  • Aerospace and defense systems
  • Automotive driver assistance (ADAS)
  • Data center and networking acceleration
Product Introduction: XC7A100T-FGG676 Product Introduction

The XC7A100T-FGG676 is a mid-high density Artix-7 FPGA from Xilinx (AMD), delivering approximately 101,440 logic cells, 240 DSP slices, and 4.86Mb of block RAM in a 676-ball Fine-pitch BGA package. Built on TSMC’s 28nm high-k metal gate (HKMG) process technology, the Artix-7 family represents a significant leap from Spartan-6 in performance, integration, and power efficiency, while maintaining cost-optimized positioning.

At the core of the Artix-7 architecture is the 6-input LUT with dual flip-flops, organized into CLB slices similar to Spartan-6 but with improved routing and performance. The XC7A100T provides 15,850 CLB slices with 126,800 flip-flops, supporting both combinational logic and highly pipelined designs. Approximately half of the slices are SLICEMs capable of distributed RAM and SRL shift registers.

DSP performance is substantially enhanced with 240 DSP48E1 slices. Each DSP48E1 contains a 25×18-bit two’s complement multiplier, a 48-bit accumulator, a pre-adder, and optional pipelining stages. This enables efficient implementation of FIR filters, FFTs, matrix operations, and other DSP functions at frequencies exceeding 450MHz in the -2 speed grade.

High-speed serial connectivity is provided by up to 8 GTX transceivers operating at up to 6.6 Gb/s per channel. These transceivers support popular serial protocols including PCI Express (via dedicated endpoint block), Gigabit Ethernet, SATA, CPRI, Aurora, and more. An integrated PCIe Gen2 x4 endpoint block and dual Ethernet MACs further reduce system-level BOM cost.

The FGG676 package provides up to 500 user I/O pins across 8 banks – including both high-performance (HP) and high-range (HR) I/O banks. HP banks support higher performance with lower voltage standards, while HR banks support wider voltage ranges including 3.3V. The 27x27mm footprint with 1.0mm ball pitch offers an excellent balance between I/O count and PCB design complexity.

Working Principle: XC7A100T-FGG676 Working Principle

The Artix-7 XC7A100T is a 28nm FPGA implementing digital circuits through configurable logic, programmable routing, serial transceivers, and hardened IP blocks. Key architectural components:

1. Configurable Logic Blocks (CLBs): 15,850 slices organized in columns and rows. Each slice contains four 6-input LUTs and eight flip-flops. SLICEM slices (approximately 50%) support distributed RAM (64-bit per LUT) and SRL32 shift registers. Routing uses a hierarchical interconnect structure optimized for both short and long routes, minimizing delay and power consumption.

2. Block RAM (BRAM): 135 dedicated 36Kb block RAMs arranged in columns. Each can be configured as a 36Kb true dual-port RAM or split into two independent 18Kb RAMs. Built-in FIFO logic and byte write enable simplify memory interface design. Total BRAM: 4,860Kb. Cascading creates deep buffers for video line stores, packet buffers, and large FIFOs.

3. DSP48E1 Slices: 240 DSP slices in a dedicated column. Each contains a 25×18-bit signed multiplier, 48-bit accumulator, pre-adder, and optional pipeline registers. Supports operations at 450 MHz+ in -2 speed grade. Cascading enables wider arithmetic operations. Key applications: FIR/IIR filters, FFT, digital up/down conversion, matrix math, and arithmetic accelerators.

4. Clock Management: Six Clock Management Tiles (CMTs), each containing one Mixed-Mode Clock Manager (MMCM) and one Phase-Locked Loop (PLL). MMCMs provide precise frequency synthesis (fractional-N), phase shifting, deskew, and duty cycle correction with very low jitter. PLLs offer additional clock multiplication/division options. Global clock networks distribute clocks with minimal skew across the device.

5. GTX Transceivers: Up to 8 high-speed serial transceivers, each operating at data rates from ~500 Mb/s up to 6.6 Gb/s. Each transceiver includes a PCS (Physical Coding Sublayer) and PMA (Physical Media Attachment) with CDR (Clock and Data Recovery). Supports multiple protocols: PCIe, GigE, SATA, CPRI, Aurora, Serial RapidIO, and custom protocols.

6. PCI Express Block: A dedicated PCIe endpoint block supporting Gen2 (5.0 Gb/s) up to x4 lane width. Includes the physical layer, data link layer, and transaction layer, significantly reducing FPGA logic utilization compared to a soft implementation.

7. Ethernet MACs: Two tri-mode Ethernet MAC blocks supporting 10/100/1000 Mbps and 2.5 Gbps. Interfaces include GMII, RGMII, and SGMII. Reduces logic usage and simplifies Ethernet design.

8. Memory Interface Generator (MIG): Hardened memory controller blocks supporting DDR3, DDR3L, and LPDDR2 at data rates up to 800 Mb/s. The MIG includes PHY and controller logic, delivering high memory bandwidth with minimal design effort.

Pin Description: XC7A100T-FGG676 Pin Definition and Functions
Pin Group Description
VCCINT Core logic supply: 1.0 V nominal (for -2/-3 speed grades). Multiple VCCINT balls – all must be connected with proper decoupling.
VCCAUX Auxiliary supply: 1.8 V. Powers CMTs, configuration logic, and various auxiliary circuits. Multiple VCCAUX pins distributed throughout.
VMGTAVCC GTX transceiver analog supply: 1.0 V. Powers the analog portion of GTX transceivers. Requires careful filtering for low jitter.
VMGTAVTT GTX transceiver termination supply: 1.2 V. Powers the transceiver output driver and termination circuits.
VCCBANKx I/O bank supply voltages. 8 banks total (mix of HP and HR). HP banks: max 1.8V Vcco. HR banks: up to 3.3V Vcco. Each bank independent.
GND Ground reference. Extensive ground distribution for signal integrity and thermal management.
User I/O Pins Up to 500 general-purpose I/O pins across 8 banks. Supports 50+ I/O standards: LVCMOS 12-33, LVDS, LVPECL, HSTL, SSTL, and more.
MRCC/SRCC Clock-capable I/O pins with dedicated CMT routing. MRCCs span multiple regions; SRCCs within single region. Can be used as regular I/O.
GTX MGT Pins GTX transceiver differential I/O pairs. MGTXRXP/TXN (receive) and MGTXTXP/TXN (transmit) for each GTX channel. Connect directly to serial data channels.
Configuration Pins CCLK, D00-D07 (data), DIN, DOUT, CSI_B, RDWR_B, INIT_B, DONE, PROGRAM_B, M0/M1/M2 (mode pins), FCS_B, FOE_B, FWE_B (BPI).
JTAG Pins TCK, TMS, TDI, TDO. IEEE 1149.1 boundary scan and JTAG configuration/programming.
VREF Pins Voltage reference pins for differential input standards (HSTL, SSTL, etc.). Per bank, dual-function with I/O pins.

Package: FGG676 – Fine-pitch Ball Grid Array, 676 balls. Body dimensions: 27mm x 27mm. Ball pitch: 1.0mm. Ball array: approximately 26×26 grid. 8 I/O banks (mix of HP and HR). RoHS compliant, lead-free solder balls. FGG = Fine-pitch, Wire-bond, Green (Pb-free).

Application Scenarios: In which products and applications is XC7A100T-FGG676 used
  • Software-Defined Radio (SDR): SDR transceivers, baseband processors, and cognitive radio systems where 240 DSP slices provide ample FIR filter and FFT processing power, 8 GTX transceivers handle high-speed JESD204B/C ADC/DAC interfaces, and the integrated Ethernet MACs support network connectivity.
  • Medical Imaging and Diagnostics: Ultrasound beamforming, CT reconstruction acceleration, digital X-ray, and MRI front-ends requiring massive DSP computation, high-speed serial data links, and large on-chip memory for data buffering and processing pipelines.
  • Industrial Automation and Control: High-end motion controllers, multi-axis CNC systems, industrial vision inspection, and factory automation requiring real-time processing, multiple high-speed interfaces (EtherCAT, PROFINET), and integration of control logic, comms, and I/O in a single chip.
  • Video Processing and Broadcast: Professional video scalers, format converters, multi-view processors, and broadcast routing equipment where DSP slices + BRAM enable multiple video pipelines, and GTX transceivers provide SDI/HDMI 2.0 connectivity.
  • High-Speed Test and Measurement: High-speed oscilloscopes, logic analyzers, protocol analyzers, and ATE systems requiring high I/O count for probe channels, GTX transceivers for high-speed serial analysis, and DSP for real-time signal processing and trigger functions.
  • Aerospace and Defense: Avionics processing, radar front-ends, electronic warfare systems, and secure communications where the 28nm process provides high performance at lower power, and AES encryption + Device DNA provide design security. Long lifecycle support meets defense program requirements.
  • Automotive ADAS: Advanced driver assistance systems including surround-view processing, sensor fusion (camera + radar + LiDAR), and autonomous driving compute platforms requiring video processing, DSP acceleration, and multiple high-speed interfaces to sensor modules.
  • Networking and Data Center Acceleration: Smart NICs, network security appliances, and data center acceleration cards where the PCIe Gen2 x4 interface connects to host CPUs, GTX transceivers handle network ports, and DSP slices provide packet processing and encryption acceleration.
Alternative Models: What chips are recommended as replacements for XC7A100T-FGG676
Manufacturer Part Number Logic Cells DSP BRAM Transceivers Package Notes
Xilinx/AMD XC7A50T-FGG676 52,160 120 2,700 Kb 8 GTX FBGA-676 Smaller, same package
Xilinx/AMD XC7A200T-FGG676 215,360 740 13,140 Kb 16 GTX FBGA-676 Largest Artix-7, same package
Xilinx/AMD XC7K70T-2FBG676C 65,800 240 4,770 Kb 16 GTX FBGA-676 Kintex-7, more transceivers
Intel/Altera EP4CGX150DF27C8 149,760 LE 640 M9K 6,570 Kb 12 GX BGA-672 Cyclone IV GX competitor
Lattice LFECP5U-8F-672 84 K LUT 156 DSP 3,378 Kb 8 ECP5 FPBGA-672 ECP5, lower cost
Intel/Altera 10CL080YU484C8G 80,000 LE 288 M10K 2,916 Kb – UBGA-484 Cyclone 10 LP, low cost

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1