Product Overview
The 25LC160-I is a 16 Kbit (2 K x 8) SPI serial EEPROM from Microchip Technology, operating at 2.5 V to 5.5 V supply voltage with industrial temperature range (-40 °C to +85 °C). Part of the 25-series SPI EEPROM family, this low-density device is ideal for small parameter storage and configuration data applications where a compact, low-cost non-volatile memory solution is needed.
Organized as 2,048 bytes (2 KB), the 25LC160 features byte write and 16-byte page write capability. Write operations are self-timed with a typical cycle time of 3 ms (5 ms max). The device supports SPI modes 0,0 and 1,1 with clock frequencies up to 10 MHz (3 MHz at 2.5 V), providing fast data transfer compared to I²C alternatives.
The 25LC160 includes a hardware Write-Protect (WP) pin, software-configurable block protection (BP0, BP1) allowing protection of 1/4, 1/2, or the entire array, and a HOLD pin for pausing serial communication. With over 1 million erase/write cycles and greater than 200-year data retention, this device offers Microchip’s renowned EEPROM reliability in a compact, cost-effective package.
Key Specifications
| Parameter | Value |
|---|---|
| Memory Type | SPI Serial EEPROM |
| Density | 16 Kbit (2 Kbyte) |
| Organization | 2,048 x 8 bits |
| Interface | SPI (Modes 0,0 and 1,1) |
| Max Clock Frequency | 10 MHz @ 5 V; 3 MHz @ 2.5 V |
| Operating Voltage | 2.5 V to 5.5 V |
| Page Size | 16 bytes |
| Page Write Time | 5 ms max (typical 3 ms) |
| Read Current (max) | 2 mA @ 5.5 V |
| Standby Current (max) | 5 µA |
| Write Protect | Hardware WP pin + software block protection |
| Block Protection | BP0, BP1 (protect 1/4, 1/2, all, or none) |
| HOLD Function | Yes (/HOLD pin) |
| Sequential Read | Yes (entire array) |
| Endurance | 1,000,000 erase/write cycles |
| Data Retention | > 200 years |
| ESD Protection | > 4,000 V |
| Operating Temperature | -40 °C to +85 °C (industrial, I grade) |
| Packages Available | 8-pin PDIP, SOIC, TSSOP, DFN, SOT-23-6 |
Features
- 16 Kbit (2 K x 8) SPI serial EEPROM
- Up to 10 MHz SPI clock (5 V operation)
- SPI modes 0,0 and 1,1 supported
- 2.5 V to 5.5 V operating voltage
- 16-byte page write buffer
- 5 ms max page write time
- Block write protection (BP0, BP1)
- Hardware Write-Protect (WP) pin
- HOLD pin for pausing serial transfers
- Sequential read capability
- Self-timed auto-erase write cycle
- Power-on reset and brown-out protection
- Low power CMOS technology
- 2 mA max active current, 5 µA standby
- > 1M erase/write cycles
- > 200-year data retention
- Industrial temperature: -40 to +85 °C
- Multiple small package options including SOT-23-6
- RoHS compliant, Pb-free
Applications
- Small configuration parameter storage
- Sensor calibration data
- Device ID and serial number storage
- Consumer electronics small data storage
- Power supply configuration
- Display panel configuration
- IoT node parameter storage
- Board-level identification (ID EEPROM)













