Opens in a new tab

25LC256T-I

Microchip 25-series SPI EEPROM, 256Kbit/32KB, 10MHz, 2.5-5.5V, 64B page, WP+HOLD, 1M cycles, industrial -40~85°C, tape&reel, mid-density

12000

Effective Inventory

Image for reference only

Manufacturer Part:

25LC256T-I

Package:

8-pin SOIC-8 (150mil) / TSSOP-8 in tape & reel packaging (-SN = SOIC, -ST = TSSOP), T suffix = tape and reel

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 25LC256T-I is a 256 Kbit (32 K x 8) SPI serial EEPROM from Microchip Technology in tape and reel packaging, operating at 2.5 V to 5.5 V with industrial temperature range (-40 °C to +85 °C). The ‘T’ suffix indicates tape and reel packaging for automated SMT assembly. Part of the widely used 25-series EEPROM family, this mid-density device offers a balance of capacity and cost for general-purpose non-volatile storage.

Organized as 32,768 bytes (32 KB), the 25LC256 features byte write and 64-byte page write capability with typical 3 ms write cycle time (5 ms max). The device supports SPI modes 0,0 and 1,1 at clock frequencies up to 10 MHz (20 MHz for FC variant), providing high data throughput for configuration data, firmware backup, and event logging.

Advanced features include hardware Write-Protect (WP) pin, software-configurable block protection (BP0, BP1, BP2) with quarter/half/full array protection, and a /HOLD pin for pausing SPI communication. The device offers over 1 million erase/write cycles and greater than 200-year data retention. The industrial temperature rating and compact SOIC/TSSOP package options make it suitable for a wide range of industrial, automotive, and consumer applications.

Key Specifications

Parameter Value
Memory Type SPI Serial EEPROM
Density 256 Kbit (32 Kbyte)
Organization 32,768 x 8 bits
Interface SPI (Modes 0,0 and 1,1)
Max Clock Frequency 10 MHz (LC series, 2.5-5.5 V)
Operating Voltage 2.5 V to 5.5 V
Page Size 64 bytes
Page Write Time 5 ms max (typical 3 ms)
Read Current (max) 3 mA @ 5.5 V
Standby Current (max) 5 µA
Write Protect Hardware WP pin + software block protection
Block Protection BP0, BP1, BP2 (0, 1/4, 1/2, all array)
HOLD Function Yes (/HOLD pin)
Sequential Read Yes (entire 32 KB array)
Endurance 1,000,000 erase/write cycles
Data Retention > 200 years
ESD Protection > 4,000 V
Operating Temperature -40 °C to +85 °C (industrial)
Package 8-pin SOIC/TSSOP (tape & reel)

Features

  • 256 Kbit (32 K x 8) SPI serial EEPROM
  • 10 MHz maximum SPI clock frequency
  • SPI modes 0,0 and 1,1 supported
  • 2.5 V to 5.5 V operating voltage
  • 64-byte page write buffer
  • Self-timed auto-erase write cycle
  • Block write protection (BP0, BP1, BP2)
  • Hardware Write-Protect (WP) pin
  • /HOLD pin for pausing communication
  • Sequential read support
  • Power-on reset and brown-out detection
  • Low power CMOS operation
  • 3 mA active, 5 µA standby current
  • > 1M erase/write cycles
  • > 200-year data retention
  • > 4 kV ESD protection
  • Industrial temperature: -40 to +85 °C
  • Tape and reel packaging for automated assembly
  • RoHS compliant, Pb-free

Applications

  • Industrial control configuration and logging
  • Consumer electronics firmware storage
  • Automotive sensor calibration data
  • Networking equipment parameter storage
  • Medical device configuration
  • Smart meter data logging
  • Display and touch controller parameters
  • Battery management system data
Product Introduction: 25LC256T-I Product Introduction

The 25LC256T-I is a 256 Kbit (32,768 x 8-bit) SPI serial EEPROM from Microchip Technology in industrial temperature grade with tape and reel packaging. The -T suffix indicates the device is supplied on tape and reel for automated surface-mount assembly. The LC designation means 2.5 V minimum operating voltage, and -I denotes industrial temperature range (-40°C to +85°C).

With 32 KB of non-volatile storage, the 25LC256 is one of the most versatile densities in the 25-series family, suitable for a wide range of applications including configuration data storage, parameter tables, event logging, and small firmware backup. Its popularity stems from the combination of sufficient capacity for most embedded system configuration needs, low cost, and high reliability.

The SPI interface supports both Mode 0 (0,0) and Mode 3 (1,1) at clock frequencies up to 10 MHz. The 64-byte page write buffer enables efficient programming of contiguous data blocks, significantly improving throughput compared to byte-by-byte writing. Sequential read allows the entire 32 KB memory to be read in a single continuous operation after an initial address setup.

Write protection features include a hardware Write-Protect (WP) pin and software-configurable block protection bits (BP0, BP1, BP2) in the status register. These provide flexible protection from none to the entire array. The /HOLD pin allows pausing a SPI transaction without resetting the sequence, useful in multi-device SPI bus architectures.

Built-in power-on reset and brown-out detection protect against power supply anomalies. With over 1 million erase/write cycles and greater than 200-year data retention, the 25LC256 offers Microchip’s industry-leading EEPROM reliability. The device is commonly available in SOIC-8 and TSSOP-8 packages in tape and reel format for high-volume manufacturing.

Working Principle: 25LC256T-I Working Principle

The 25LC256 shares the same architecture and operation as other 25-series SPI EEPROMs:

1. Memory Array: 32,768 bytes (256 Kbit) of EEPROM organized as 32K x 8 bits. 512 pages of 64 bytes each. Floating-gate storage with >200 year retention.

2. SPI Interface: 4-wire SPI (/CS, SCK, SI, SO). Mode 0 and Mode 3 support. Max 10 MHz clock at 5V.

3. Instruction Set: READ, WRITE, WREN, WRDI, RDSR, WRSR. Auto-erase before write.

4. Status Register: WIP, WEL, BP0/1/2, WPEN. Block protection: none, 1/4, 1/2, or entire array.

5. Power: 3 mA active read, 5 µA standby. POR and brown-out protection.

Pin Description: 25LC256T-I Pin Definition and Functions
Pin # Name Type Description
1 /CS Input Chip Select, active low. Enable device for communication.
2 SO Output Serial Data Output. Tri-state when /CS is high.
3 /WP Input Write Protect, active low. Protects status register writes.
4 Vss GND Ground supply pin.
5 SI Input Serial Input. Instructions, addresses, write data.
6 SCK Input Serial Clock from SPI master.
7 /HOLD Input Hold, active low. Pauses SPI transaction.
8 Vcc Power Positive supply: 2.5 V to 5.5 V.

Standard 8-pin SOIC/TSSOP pinout. Tape and reel packaging (T suffix). Industrial grade -40°C to +85°C.

Application Scenarios: In which products and applications is 25LC256T-I used
  • Industrial Control Configuration and Logging: PLC modules, industrial sensors, and automation controllers storing configuration parameters, calibration tables, and limited event logs. 32 KB provides sufficient capacity for typical industrial control system configuration needs.
  • Consumer Electronics Firmware Storage: Smart TVs, audio equipment, and home appliances storing user settings, factory calibration, and boot parameters. Low cost in high volume and availability in tape and reel packaging make it ideal for consumer production.
  • Automotive Sensor Calibration Data: Automotive sensor modules (pressure, temperature, position) storing per-unit calibration coefficients and identification data. Industrial temperature range covers most under-hood and cabin environments.
  • Networking Equipment Parameters: Ethernet switches, routers, and gateways storing port configuration, VLAN settings, MAC addresses, and system parameters. Block protection prevents accidental corruption of factory-programmed parameters.
Alternative Models: What chips are recommended as replacements for 25LC256T-I
Manufacturer Part Number Density Clock Page Size Notes
Microchip 25LC512T-I/SN 512 Kbit 10 MHz 128 B Double density
Microchip 25LC128T-I/SN 128 Kbit 10 MHz 64 B Half density
Microchip 25FC256T-I/SN 256 Kbit 20 MHz 64 B FC series, 2x faster clock
STMicro M95256-DRMN3TP 256 Kbit 20 MHz 64 B ST M95 series

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1